74AHC08

74AHC08; 74AHCT08 Quad 2-input AND gate Rev. 03 — 14 November 2007 Product data sheet 1. General description The 74AHC08; 74AHCT08 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard JESD7-A. The 74AHC08; 74AHCT08 provides the quad 2-input AND function. 2. Features s s s s s s Balanced propagation delays All inputs have a Schmitt-trigger action Inputs accepts voltages higher than VCC For 74AHC08 only: operates with CMOS input levels For 74AHCT08 only: operates with TTL input levels ESD protection: x HBM JESD22-A114E exceeds 2000 V x MM JESD22-A115-A exceeds 200 V x CDM JESD22-C101C exceeds 1000 V s Multiple package options s Specified from −40 °C to +85 °C and from −40 °C to +125 °C 3. Ordering information Table 1. Ordering information Package Temperature range 74AHC08D 74AHCT08D 74AHC08PW 74AHCT08PW 74AHC08BQ 74AHCT08BQ −40 °C to +125 °C −40 °C to +125 °C TSSOP14 −40 °C to +125 °C Name SO14 Description plastic small outline package; 14 leads; body width 3.9 mm plastic thin shrink small outline package; 14 leads; body width 4.4 mm Version SOT108-1 SOT402-1 SOT762-1 Type number DHVQFN14 plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 14 terminals; body 2.5 × 3 × 0.85 mm NXP Semiconductors 74AHC08; 74AHCT08 Quad 2-input AND gate 4. Functional diagram 1 2 1 2 4 5 9 10 12 13 1A 1B 2A 2B 3A 3B 4A 4B 1Y 3 4 2Y 6 5 & 6 A Y & 8 B mna221 & 3 3Y 8 9 10 4Y 11 12 & mna222 11 13 mna223 Fig 1. Logic symbol Fig 2. IEC logic symbol Fig 3. Logic diagram (one gate) 5. Pinning information 5.1 Pinning terminal 1 index area 1B 1Y 2A 2B 2B 2Y GND 5 6 7 001aac945 1A 1B 1Y 2A 1 2 3 4 14 VCC 13 4B 12 4A 2 3 4 5 6 7 GND 3Y 8 14 VCC 13 4B 12 4A 11 4Y 10 3B 9 3A 08 11 4Y 10 3B 9 8 3A 3Y GND(1) 2Y 1 1A 08 001aac946 Transparent top view (1) The die substrate is attached to this pad using conductive die attach material. It can not be used as a supply pin or input. Fig 4. Pin configuration SO14 and TSSOP14 Fig 5. Pin configuration DHVQFN14 74AHC_AHCT08_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 14 November 2007 2 of 14 NXP Semiconductors 74AHC08; 74AHCT08 Quad 2-input AND gate 5.2 Pin description Table 2. Symbol 1A 1B 1Y 2A 2B 2Y GND 3Y 3A 3B 4Y 4A 4B VCC Pin description Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Description data input data input data output data input data input data output ground (0 V) data output data input data input data output data input data input supply voltage 6. Functional description Table 3. Input nA L X H [1] Function selection[1] Output nB X L H nY L L H H = HIGH voltage level; L = LOW voltage level; X = don’t care 7. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol VCC VI IIK IOK IO ICC IGND Tstg Parameter supply voltage input voltage input clamping current output clamping current output current supply current ground current storage temperature VI < −0.5 V VO < −0.5 V or VO > VCC + 0.5 V VO = −0.5 V to (VCC + 0.5 V) [1] [1] Conditions Min −0.5 −0.5 −20 −75 −65 Max +7.0 +7.0 ±20 ±25 75 +150 Unit V V mA mA mA mA mA °C 74AHC_AHCT08_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 14 November 2007 3 of 14 NXP Semiconductors 74AHC08; 74AHCT08 Quad 2-input AND gate Table 4. Limiting values …continued In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Ptot Parameter total power dissipation SO14 package TSSOP14 package DHVQFN14 package [1] [2] [3] [4] Conditions Tamb = −40 °C to +125 °C [2] [3] [4] Min - Max 500 500 500 Unit mW mW mW The input and output voltage ratings may be exceeded if the input and output current ratings are observed. Ptot derates linearly with 8 mW/K above 70 °C. Ptot derates linearly with 5.5 mW/K above 60 °C. Ptot derates linearly with 4.5 mW/K above 60 °C. 8. Recommended operating conditions Table 5. Recommended operating conditions Voltages are referenced to GND (ground = 0 V). Symbol Parameter VCC VI VO Tamb ∆t/∆V supply voltage input voltage output voltage ambient temperature input transition rise and fall rate VCC = 3.3 V ± 0.3 V VCC = 5.0 V ± 0.5 V Conditions 74AHC08 Min 2.0 0 0 −40 Typ 5.0 +25 Max 5.5 5.5 VCC +125 100 20 74AHCT08 Min 4.5 0 0 −40 Typ 5.0 +25 Max 5.5 5.5 VCC +125 20 V V V °C ns/V ns/V Unit 9. Static characteristics Table 6. Static characteristics Voltages are referenced to GND (ground = 0 V). Symbol Parameter For type 74AHC08 VIH HIGH-level input voltage VCC = 2.0 V VCC = 3.0 V VCC = 5.5 V VIL LOW-level input voltage VCC = 2.0 V VCC = 3.0 V VCC = 5.5 V VOH HIGH-level VI = VIH or VIL output voltage IO = −50 µA; VCC = 2.0 V IO = −50 µA; VCC = 3.0 V IO = −50 µA; VCC = 4.5 V IO = −4.0 mA; VCC = 3.0 V IO = −8.0 mA; VCC = 4.5 V 74AHC_AHCT08_3 Conditions Min 1.5 2.1 3.85 1.9 2.9 4.4 2.58 3.94 25 °C Typ 2.0 3.0 4.5 Max 0.5 0.9 1.65 - −40 °C to +85 °C −40 °C to +125 °C Unit Min 1.5 2.1 3.85 1.9 2.9 4.4 2.48 3.8 Max 0.5 0.9 1.65 Min 1.5 2.1 3.85 1.9 2.9 4.4 2.4 3.7 Max 0.5 0.9 1.65 V V V V V V V V V V V © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 14 November 2007 4 of 14 NXP Semiconductors 74AHC08; 74AHCT08 Quad 2-input AND gate Table 6. Static characteristics …continued Voltages are referenced to GND (ground = 0 V). Symbol Parameter VOL Conditions Min LOW-level VI = VIH or VIL output voltage IO = 50 µA; VCC = 2.0 V IO = 50 µA; VCC = 3.0 V IO = 50 µA; VCC = 4.5 V IO = 4.0 mA; VCC = 3.0 V IO = 8.0 mA; VCC = 4.5 V II ICC CI input leakage current VI = 5.5 V or GND; VCC = 0 V to 5.5 V 25 °C Typ 0 0 0 3.0 Max 0.1 0.1 0.1 0.36 0.36 0.1 2.0 10 −40 °C to +85 °C −40 °C to +125 °C Unit Min Max 0.1 0.1 0.1 0.44 0.44 1.0 20 10 Min Max 0.1 0.1 0.1 0.55 0.55 2.0 40 10 V V V V V µA µA pF supply current VI = VCC or GND; IO = 0 A; VCC = 5.5 V input capacitance HIGH-level input voltage LOW-level input voltage VCC = 4.5 V to 5.5 V VCC = 4.5 V to 5.5 V For type 74AHCT08 VIH VIL VOH 2.0 0.8 2.0 0.8 2.0 0.8 V V HIGH-level VI = VIH or VIL; VCC = 4.5 V output voltage IO = −50 µA IO = −8.0 mA LOW-level VI = VIH or VIL; VCC = 4.5 V output voltage IO = 50 µA IO = 8.0 mA input leakage current VI = 5.5 V or GND; VCC = 0 V to 5.5 V 4.4 3.94 - 4.5 0 - 0.1 0.36 0.1 2.0 1.35 4.4 3.8 - 0.1 0.44 1.0 20 1.5 4.4 3.7 - 0.1 0.55 2.0 40 1.5 V V V V µA µA mA VOL II ICC ∆ICC supply current VI = VCC or GND; IO = 0 A; VCC = 5.5 V additional per input pin; supply current VI = VCC − 2.1 V; IO = 0 A; other pins at VCC or GND; VCC = 4.5 V to 5.5 V input capacitance CI - 3.0 10 - 10 - 10 pF 74AHC_AHCT08_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 14 November 2007 5 of 14 NXP Semiconductors 74AHC08; 74AHCT08 Quad 2-input AND gate 10. Dynamic characteristics Table 7. Dynamic characteristics GND = 0 V; For test circuit see Figure 7. Symbol Parameter For type 74AHC08 tpd propagation delay nA, nB to nY; see Figure 6 VCC = 3.0 V to 3.6 V CL = 15 pF CL = 50 pF VCC = 4.5 V to 5.5 V CL = 15 pF CL = 50 pF CPD power CL = 50 pF; fi = 1 MHz; dissipation VI = GND to VCC capacitance propagation delay nA, nB to nY; see Figure 6 VCC = 4.5 V to 5.5 V CL = 15 pF CL = 50 pF CPD power CL = 50 pF; fi = 1 MHz; dissipation VI = GND to VCC capacitance [3] [3] [2] Conditions Min 25 °C Typ[1] Max −40 °C to +85 °C −40 °C to +125 °C Unit Min Max Min Max - 4.0 5.6 3.0 4.2 10.0 8.8 12.3 5.9 7.9 - 1.0 1.0 1.0 1.0 - 10.5 14 7.0 9.0 - 1.0 1.0 1.0 1.0 - 11.0 15.5 7.5 10.0 - ns ns ns ns pF For type 74AHCT08 tpd [2] - 3.2 4.2 12.0 6.9 7.9 - 1.0 1.0 - 8.0 9.0 - 1.0 1.0 - 9.0 10.0 - ns ns pF [1] [2] [3] Typical values are measured at nominal supply voltage (VCC = 3.3 V and VCC = 5.0 V). tpd is the same as tPLH and tPHL. CPD is used to determine the dynamic power dissipation (PD in µW). PD = CPD × VCC2 × fi × N + Σ(CL × VCC2 × fo) where: fi = input frequency in MHz, fo = output frequency in MHz CL = output load capacitance in pF VCC = supply voltage in Volts N = number of inputs switching Σ(CL × VCC2 × fo) = sum of the outputs. 74AHC_AHCT08_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 14 November 2007 6 of 14 NXP Semiconductors 74AHC08; 74AHCT08 Quad 2-input AND gate 11. Waveforms VI nA, nB input GND t PHL VOH nY output VOL VM mna224 VM t PLH Measurement points are given in Table 8. VOL and VOH are typical voltage output levels that occur with the output load. Fig 6. The input (nA, nB) to output (nY) propagation delays Table 8. Type 74AHC08 74AHCT08 Measurement points Input VM 0.5VCC 1.5 V Output VM 0.5VCC 0.5VCC 74AHC_AHCT08_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 14 November 2007 7 of 14 NXP Semiconductors 74AHC08; 74AHCT08 Quad 2-input AND gate VI negative pulse 0V tW 90 % VM 10 % tf tr tr tf 90 % VM 10 % tW VM VM VI positive pulse 0V VCC VCC PULSE GENERATOR VI VO RL S1 DUT RT CL open 001aad983 Test data is given in Table 9. Definitions test circuit: RT = Termination resistance should be equal to output impedance Zo of the pulse generator. CL = Load capacitance including jig and probe capacitance. RL = Load resistance. S1 = Test selection switch. Fig 7. Load circuit for switching times Table 9. Type 74AHC08 74AHCT08 Test data Input VI VCC 3.0 V tr, tf ≤ 3.0 ns ≤ 3.0 ns Load CL 15 pF, 50 pF 15 pF, 50 pF RL 1 kΩ 1 kΩ S1 position tPHL, tPLH open open tPZH, tPHZ GND GND tPZL, tPLZ VCC VCC 74AHC_AHCT08_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 14 November 2007 8 of 14 NXP Semiconductors 74AHC08; 74AHCT08 Quad 2-input AND gate 12. Package outline SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1 D E A X c y HE vMA Z 14 8 Q A2 pin 1 index θ Lp 1 e bp 7 wM L detail X A1 (A 3) A 0 2.5 scale 5 mm DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT mm A max. 1.75 A1 0.25 0.10 A2 1.45 1.25 A3 0.25 0.01 bp 0.49 0.36 c 0.25 0.19 D (1) 8.75 8.55 E (1) 4.0 3.8 0.16 0.15 e 1.27 0.05 HE 6.2 5.8 L 1.05 Lp 1.0 0.4 Q 0.7 0.6 0.028 0.024 v 0.25 0.01 w 0.25 0.01 y 0.1 Z (1) 0.7 0.3 θ 0.010 0.057 inches 0.069 0.004 0.049 0.019 0.0100 0.35 0.014 0.0075 0.34 0.244 0.039 0.041 0.228 0.016 0.028 0.004 0.012 8 o 0 o Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. OUTLINE VERSION SOT108-1 REFERENCES IEC 076E06 JEDEC MS-012 JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 Fig 8. Package outline SOT108-1 (SO14) 74AHC_AHCT08_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 14 November 2007 9 of 14 NXP Semiconductors 74AHC08; 74AHCT08 Quad 2-input AND gate TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1 D E A X c y HE vMA Z 14 8 Q A2 pin 1 index A1 θ Lp L (A 3) A 1 e bp 7 wM detail X 0 2.5 scale 5 mm DIMENSIONS (mm are the original dimensions) UNIT mm Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT402-1 REFERENCES IEC JEDEC MO-153 JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-18 A max. 1.1 A1 0.15 0.05 A2 0.95 0.80 A3 0.25 bp 0.30 0.19 c 0.2 0.1 D (1) 5.1 4.9 E (2) 4.5 4.3 e 0.65 HE 6.6 6.2 L 1 Lp 0.75 0.50 Q 0.4 0.3 v 0.2 w 0.13 y 0.1 Z (1) 0.72 0.38 θ 8 o 0 o Fig 9. Package outline SOT402-1 (TSSOP14) 74AHC_AHCT08_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 14 November 2007 10 of 14 NXP Semiconductors 74AHC08; 74AHCT08 Quad 2-input AND gate DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; SOT762-1 14 terminals; body 2.5 x 3 x 0.85 mm D B A A A1 E c terminal 1 index area detail X terminal 1 index area e 2 L e1 b 6 vMCAB wM C y1 C C y 1 Eh 14 7 e 8 13 Dh 0 9 X 2.5 scale 5 mm DIMENSIONS (mm are the original dimensions) UNIT mm A(1) max. 1 A1 0.05 0.00 b 0.30 0.18 c 0.2 D (1) 3.1 2.9 Dh 1.65 1.35 E (1) 2.6 2.4 Eh 1.15 0.85 e 0.5 e1 2 L 0.5 0.3 v 0.1 w 0.05 y 0.05 y1 0.1 Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. OUTLINE VERSION SOT762-1 REFERENCES IEC --JEDEC MO-241 JEITA --EUROPEAN PROJECTION ISSUE DATE 02-10-17 03-01-27 Fig 10. Package outline SOT762-1 (DHVQFN14) 74AHC_AHCT08_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 14 November 2007 11 of 14 NXP Semiconductors 74AHC08; 74AHCT08 Quad 2-input AND gate 13. Abbreviations Table 10. Acronym CMOS LSTTL ESD HBM MM CDM TTL Abbreviations Description Complementary Metal Oxide Semiconductor Low-power Schottky Transistor-Transistor Logic ElectroStatic Discharge Human Body Model Machine Model Charged Device Model Transistor-Transistor Logic 14. Revision history Table 11. Revision history Release date 20071114 Data sheet status Product data sheet Change notice Supersedes 74AHC_AHCT08_2 Document ID 74AHC_AHCT08_3 Modifications: • • • • • The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors. Legal texts have been adapted to the new company name where appropriate. Section 3: DHVQFN14 package added. Section 7: derating values added for DHVQFN14 package. Section 12: outline drawing added for DHVQFN14 package. Product specification Product specification 74AHC_AHCT08_1 - 74AHC_AHCT08_2 74AHC_AHCT08_1 19990924 19981218 74AHC_AHCT08_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 14 November 2007 12 of 14 NXP Semiconductors 74AHC08; 74AHCT08 Quad 2-input AND gate 15. Legal information 15.1 Data sheet status Document status[1][2] Objective [short] data sheet Preliminary [short] data sheet Product [short] data sheet [1] [2] [3] Product status[3] Development Qualification Production Definition This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification. Please consult the most recently issued document before initiating or completing a design. The term ‘short data sheet’ is explained in section “Definitions”. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 15.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. 15.3 Disclaimers General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or 15.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 16. Contact information For additional information, please visit: http://www.nxp.com For sales office addresses, send an email to: salesaddresses@nxp.com 74AHC_AHCT08_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 14 November 2007 13 of 14 NXP Semiconductors 74AHC08; 74AHCT08 Quad 2-input AND gate 17. Contents 1 2 3 4 5 5.1 5.2 6 7 8 9 10 11 12 13 14 15 15.1 15.2 15.3 15.4 16 17 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 1 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3 Functional description . . . . . . . . . . . . . . . . . . . 3 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Recommended operating conditions. . . . . . . . 4 Static characteristics. . . . . . . . . . . . . . . . . . . . . 4 Dynamic characteristics . . . . . . . . . . . . . . . . . . 6 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 12 Legal information. . . . . . . . . . . . . . . . . . . . . . . 13 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Contact information. . . . . . . . . . . . . . . . . . . . . 13 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2007. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 14 November 2007 Document identifier: 74AHC_AHCT08_3