74AHCT240
Octal buffer/line driver; inverting; 3-state
Rev. 6 — 29 June 2020
Product data sheet
1. General description
The 74AHCT240 is an 8-bit inverting buffer/line driver with 3-state outputs. This device can be
used as two 4-bit buffers or one 8-bit buffer. It features two output enables (1OE and 2OE),
each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a
high-impedance OFF-state. Inputs are over voltage tolerant. This feature allows the use of these
devices as translators in mixed voltage environments.
2. Features and benefits
•
•
•
•
•
•
•
Balanced propagation delays
All inputs have a Schmitt-trigger action
Inputs accepts voltages higher than VCC
Operates with TTL input levels
ESD protection:
• HBM JESD22-A114F exceeds 2000 V
• CDM JESD22-C101D exceeds 1000 V
Multiple package options
Specified from -40 °C to +85 °C and from -40 °C to +125 °C
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range
Name
Description
Version
74AHCT240D
-40 °C to +125 °C
SO20
plastic small outline package; 20 leads;
body width 7.5 mm
SOT163-1
74AHCT240PW
-40 °C to +125 °C
TSSOP20
plastic thin shrink small outline package; 20 leads;
body width 4.4 mm
SOT360-1
74AHCT240BQ
-40 °C to +125 °C
DHVQFN20
plastic dual in-line compatible thermal enhanced
very thin quad flat package; no leads; 20 terminals;
body 2.5 × 4.5 × 0.85 mm
SOT764-1
74AHCT240
Nexperia
Octal buffer/line driver; inverting; 3-state
4. Functional diagram
1
2
1A0
1Y0 18
2Y0 3
17
2A0
4
1A1
15
2A1
1Y1 16
2Y1 5
6
1A2
1Y2 14
13
2A2
2Y2
1Y3 12
2Y3 9
2
18
4
16
6
14
8
12
19
Fig. 1.
8
1A3
11
2A3
1
1OE
19
2OE
7
EN
EN
11
9
13
7
15
5
17
3
mgu778
mgu779
Logic symbol
Fig. 2.
IEC logic symbol
5. Pinning information
5.1. Pinning
1
terminal 1
index area
2
19 2OE
2Y0
3
18 1Y0
1A1
4
17 2A0
2Y1
5
16 1Y1
15 2A1
1
20 VCC
1A2
6
1A0
2
19 2OE
2Y0
3
18 1Y0
2Y2
7
1A1
4
17 2A0
1A3
8
2Y1
5
16 1Y1
2Y3
9
1A2
6
15 2A1
2Y2
7
14 1Y2
1A3
8
13 2A2
2Y3
9
12 1Y3
GND 10
11 2A3
Product data sheet
13 2A2
12 1Y3
001aal193
Transparent top view
Pin configuration SOT163-1 (SO20) and
SOT360-1 (TSSOP20)
74AHCT240
14 1Y2
GND(1)
GND 10
1OE
(1) This is not a ground pin. There is no electrical or
mechanical requirement to solder the pad. In case
soldered, the solder land should remain floating or
connected to GND.
001aal192
Fig. 3.
1A0
2A3 11
74AHCT240
20 VCC
1OE
74AHCT240
Fig. 4.
Pin configuration SOT764-1 (DHVQFN20)
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 29 June 2020
©
Nexperia B.V. 2020. All rights reserved
2 / 13
74AHCT240
Nexperia
Octal buffer/line driver; inverting; 3-state
5.2. Pin description
Table 2. Pin description
Symbol
Pin
Description
1OE, 2OE
1, 19
output enable input (active LOW)
1A0, 1A1, 1A2, 1A3
2, 4, 6, 8
data input
2A0, 2A1, 2A2, 2A3
17, 15, 13, 11
data input
1Y0, 1Y1, 1Y2, 1Y3
18, 16, 14, 12
data output
2Y0, 2Y1, 2Y2, 2Y3
3, 5, 7, 9
data output
GND
10
ground (0 V)
VCC
20
power supply
6. Functional description
Table 3. Function table
H = HIGH voltage level; L = LOW voltage level; X = don’t care; Z = high-impedance OFF-state.
Control
Input
Output
nOE
nAn
nYn
L
L
H
L
H
L
H
X
Z
7. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
Max
Unit
-0.5
+7.0
V
V
VCC
supply voltage
VI
input voltage
-0.5
+7.0
IIK
input clamping current
VI < -0.5 V
[1]
-20
-
mA
IOK
output clamping current
VO < -0.5 V or VO > VCC + 0.5 V
[1]
-
±20
mA
IO
output current
VO = -0.5 V to (VCC + 0.5 V)
-
±25
mA
ICC
supply current
-
75
mA
IGND
ground current
-75
-
mA
Tstg
storage temperature
-65
+150
°C
Ptot
total power dissipation
-
500
mW
[1]
[2]
Tamb = -40 °C to +125 °C
[2]
The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed.
For SOT163-1 (SO20) package: Ptot derates linearly with 12.3 mW/K above 109 °C.
For SOT360-1 (TSSOP20) package: Ptot derates linearly with 10.0 mW/K above 100 °C.
For SOT764-1 (DHVQFN20) package: Ptot derates linearly with 12.9 mW/K above 111 °C.
74AHCT240
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 29 June 2020
©
Nexperia B.V. 2020. All rights reserved
3 / 13
74AHCT240
Nexperia
Octal buffer/line driver; inverting; 3-state
8. Recommended operating conditions
Table 5. Recommended operating conditions
Symbol Parameter
Conditions
Min
Typ
Max
Unit
4.5
5.0
5.5
V
VCC
supply voltage
VI
input voltage
0
-
5.5
V
VO
output voltage
0
-
VCC
V
Tamb
ambient temperature
-40
+25
+125
°C
Δt/ΔV
input transition rise and fall rate
-
-
20
VCC = 5 V ± 0.5 V
ns/V
9. Static characteristics
Table 6. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
25 °C
-40 °C to +85 °C
-40 °C to +125 °C Unit
Min
Typ
Max
Min
Max
Min
Max
VIH
HIGH-level
VCC = 4.5 V to 5.5 V
input voltage
2.0
-
-
2.0
-
2.0
-
V
VIL
LOW-level
VCC = 4.5 V to 5.5 V
input voltage
-
-
0.8
-
0.8
-
0.8
V
VOH
HIGHlevel output
voltage
VI = VIH or VIL; VCC = 4.5 V
IO = -50 μA
4.4
4.5
-
4.4
-
4.4
-
V
IO = -8.0 mA
3.94
-
-
3.80
-
3.70
-
V
LOW-level
output
voltage
VI = VIH or VIL; VCC = 4.5 V
IO = 50 μA
-
0
0.1
-
0.1
-
0.1
V
IO = 8.0 mA
-
-
0.36
-
0.44
-
0.55
V
VOL
II
input leakage VI = 5.5 V or GND;
current
VCC = 0 V to 5.5 V
-
-
0.1
-
1.0
-
2.0
μA
IOZ
OFF-state
output
current
VI = VIH or VIL;
VO = VCC or GND;
VCC = 5.5 V
-
-
±0.25
-
±2.5
-
±10.0
μA
ICC
supply
current
VI = VCC or GND; IO = 0 A;
VCC = 5.5 V
-
-
4.0
-
40
-
80
μA
ΔICC
additional
supply
current
per input pin;
VI = VCC - 2.1 V;
other pins at VCC or GND;
IO = 0 A;
VCC = 4.5 V to 5.5 V
-
-
1.35
-
1.5
-
1.5
mA
CI
input
capacitance
VI = VCC or GND
-
3
10
-
10
-
10
pF
CO
output
capacitance
-
4
-
-
-
-
-
pF
74AHCT240
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 29 June 2020
©
Nexperia B.V. 2020. All rights reserved
4 / 13
74AHCT240
Nexperia
Octal buffer/line driver; inverting; 3-state
10. Dynamic characteristics
Table 7. Dynamic characteristics
Voltages are referenced to GND (ground = 0 V); for test circuit see Fig. 7.
Symbol Parameter
Conditions
25 °C
Max
Min
Max
Min
Max
-
3.0
5.8
1.0
6.8
1.0
8.5
ns
-
4.4
8.4
1.0
9.5
1.0
11.9
ns
-
3.4
7.5
1.0
9.0
1.0
14.4
ns
-
4.5
9.5
1.0
11.5
1.0
14.4
ns
VCC = 4.5 V to 5.5 V; CL = 15 pF
-
3.9
6.1
1.0
6.7
1.0
8.3
ns
VCC = 4.5 V to 5.5 V; CL = 50 pF
-
6.2
8.7
1.0
9.2
1.0
11.5
ns
-
9
-
-
-
-
-
pF
enable time nOE to nYn; see Fig. 6
[2]
VCC = 4.5 V to 5.5 V; CL = 15 pF
VCC = 4.5 V to 5.5 V; CL = 50 pF
disable time nOE to nYn; see Fig. 6
tdis
CPD
[1]
[2]
[3]
Unit
Typ [1]
VCC = 4.5 V to 5.5 V; CL = 50 pF
ten
-40 °C to
+125 °C
Min
[2]
propagation nAn to nYn; see Fig. 5
delay
VCC = 4.5 V to 5.5 V; CL = 15 pF
tpd
-40 °C to
+85 °C
[2]
power
VI = GND to VCC; CL = 50 pF;
dissipation fi = 1 MHz
capacitance
[3]
Typical values are measured at nominal supply voltage (VCC = 5.0 V).
tpd is the same as tPLH and tPHL; ten is the same as tPZH and tPZL; tdis is the same as tPLZ and tPHZ.
CPD is used to determine the dynamic power dissipation (PD in μW).
2
2
PD = CPD × VCC × fi × N + Σ(CL × VCC × fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
2
Σ(CL × VCC × fo) = sum of outputs.
74AHCT240
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 29 June 2020
©
Nexperia B.V. 2020. All rights reserved
5 / 13
74AHCT240
Nexperia
Octal buffer/line driver; inverting; 3-state
10.1. Waveforms and test circuit
VI
nAn input
VM
VM
GND
tPHL
VOH
tPLH
90 %
90 %
VM
nYn output
VM
10 %
VOL
10 %
tTHL
tTLH
mgu781
Measurement points are given in Table 8.
VOL and VOH are typical voltage output drop that occur with the output load.
Fig. 5.
Propagation delay input (nAn) to output (nYn)
VI
nOE input
VM
GND
t PLZ
t PZL
VCC
nYn output
LOW-to-OFF
OFF-to-LOW
VM
VX
VOL
t PZH
t PHZ
VOH
nYn output
HIGH-to-OFF
OFF-to-HIGH
VY
VM
GND
outputs
enabled
outputs
disabled
outputs
enabled
001aae014
Measurement points are given in Table 8.
VOL and VOH are typical voltage output drop that occur with the output load.
Fig. 6.
Enable and disable times
Table 8. Measurement points
Input
Output
VM
VM
VX
VY
1.5 V
0.5VCC
VOL + 0.3 V
VOH - 0.3 V
74AHCT240
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 29 June 2020
©
Nexperia B.V. 2020. All rights reserved
6 / 13
74AHCT240
Nexperia
Octal buffer/line driver; inverting; 3-state
VI
negative
pulse
tW
90 %
VM
0V
VI
positive
pulse
0V
VM
10 %
tf
tr
tr
tf
90 %
VM
VM
10 %
tW
VCC
G
VI
DUT
VCC
VO
RL
RT
S1
open
CL
001aad983
Test data is given in Table 9.
Definitions test circuit:
RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
CL = Load capacitance including jig and probe capacitance.
RL = Load resistance.
S1 = Test selection switch.
Fig. 7.
Test circuit for measuring switching times
Table 9. Test data
Input
Load
VI
tr, tf
CL
RL
tPHL, tPLH
tPZH, tPHZ
tPZL, tPLZ
3.0 V
3.0 ns
15 pF, 50 pF
1 kΩ
open
GND
VCC
74AHCT240
Product data sheet
S1 position
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 29 June 2020
©
Nexperia B.V. 2020. All rights reserved
7 / 13
74AHCT240
Nexperia
Octal buffer/line driver; inverting; 3-state
11. Package outline
SO20: plastic small outline package; 20 leads; body width 7.5 mm
SOT163-1
D
E
A
X
c
y
HE
v M A
Z
20
11
Q
A2
A
(A 3 )
A1
pin 1 index
θ
Lp
L
1
10
e
detail X
w M
bp
0
5
10 mm
scale
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D (1)
E (1)
e
HE
L
Lp
Q
v
w
y
mm
2.65
0.3
0.1
2.45
2.25
0.25
0.49
0.36
0.32
0.23
13.0
12.6
7.6
7.4
1.27
10.65
10.00
1.4
1.1
0.4
1.1
1.0
0.25
0.25
0.1
0.9
0.4
inches
0.1
0.012 0.096
0.004 0.089
0.01
0.019 0.013
0.014 0.009
0.51
0.49
0.30
0.29
0.05
0.419
0.043
0.055
0.394
0.016
0.043
0.039
0.01
0.01
0.004
0.035
0.016
Z
(1)
θ
o
8
o
0
Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
Fig. 8.
REFERENCES
OUTLINE
VERSION
IEC
JEDEC
SOT163-1
075E04
MS-013
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
99-12-27
03-02-19
Package outline SOT163-1 (SO20)
74AHCT240
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 29 June 2020
©
Nexperia B.V. 2020. All rights reserved
8 / 13
74AHCT240
Nexperia
Octal buffer/line driver; inverting; 3-state
TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm
D
SOT360-1
E
A
X
c
HE
y
v M A
Z
11
20
Q
A2
pin 1 index
(A 3 )
A1
A
θ
Lp
1
L
10
detail X
w M
bp
e
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D (1)
E (2)
e
HE
L
Lp
Q
v
w
y
Z (1)
θ
mm
1.1
0.15
0.05
0.95
0.80
0.25
0.30
0.19
0.2
0.1
6.6
6.4
4.5
4.3
0.65
6.6
6.2
1
0.75
0.50
0.4
0.3
0.2
0.13
0.1
0.5
0.2
8o
0o
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
OUTLINE
VERSION
SOT360-1
Fig. 9.
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
99-12-27
03-02-19
MO-153
Package outline SOT360-1 (TSSOP20)
74AHCT240
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 29 June 2020
©
Nexperia B.V. 2020. All rights reserved
9 / 13
74AHCT240
Nexperia
Octal buffer/line driver; inverting; 3-state
DHVQFN20: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads;
20 terminals; body 2.5 x 4.5 x 0.85 mm
B
D
SOT764-1
A
A
A1
E
c
detail X
terminal 1
index area
terminal 1
index area
e1
C
e
b
2
9
v
w
C A B
C
y1 C
y
L
1
10
Eh
e
20
11
19
12
X
Dh
0
2.5
5 mm
scale
Dimensions (mm are the original dimensions)
Unit
mm
A(1)
A1
b
max 1.00 0.05 0.30
nom 0.90 0.02 0.25
min 0.80 0.00 0.18
c
D(1)
Dh
E(1)
Eh
e
e1
L
v
0.2
4.6
4.5
4.4
3.15
3.00
2.85
2.6
2.5
2.4
1.15
1.00
0.85
0.5
3.5
0.5
0.4
0.3
0.1
w
y
0.05 0.05
y1
0.1
Note
1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.
References
Outline
version
IEC
JEDEC
JEITA
SOT764-1
---
MO-241
---
sot764-1_po
European
projection
Issue date
03-01-27
14-12-12
Fig. 10. Package outline SOT764-1 (DHVQFN20)
74AHCT240
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 29 June 2020
©
Nexperia B.V. 2020. All rights reserved
10 / 13
74AHCT240
Nexperia
Octal buffer/line driver; inverting; 3-state
12. Abbreviations
Table 10. Abbreviations
Acronym
Description
CDM
Charge Device Model
DUT
Device Under Test
ESD
ElectroStatic Discharge
HBM
Human Body Model
TTL
Transistor-Transistor Logic
13. Revision history
Table 11. Revision history
Document ID
Release date
Data sheet status
Change notice Supersedes
74AHCT240 v.6
20200629
Product data sheet
-
Modifications:
•
•
•
•
The format of this data sheet has been redesigned to comply with the identity
guidelines of Nexperia.
Legal texts have been adapted to the new company name where appropriate.
Table 4: Derating values for Ptot total power dissipation updated.
Table 6: IOZ conditions corrected. (errata)
74AHCT240 v.5
20160229
Modifications:
•
74AHC_AHCT240 v.4
20130925
Modifications:
•
74AHC_AHCT240 v.3
20111108
Modifications:
•
74AHC_AHCT240 v.2
20101126
74AHC_AHCT240 v.1
20100111
74AHCT240
Product data sheet
74AHCT240 v.5
Product data sheet
-
74AHC_AHCT240 v.4
Type numbers 74AHC240D, 74AHC240PW and 74AHC240BQ removed.
Product data sheet
-
74AHC_AHCT240 v.3
Fig. 5 and Fig. 6 have been made visible (errata).
Product data sheet
-
74AHC_AHCT240 v.2
Product data sheet
-
74AHC_AHCT240 v.1
Product data sheet
-
-
Legal pages updated.
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 29 June 2020
©
Nexperia B.V. 2020. All rights reserved
11 / 13
74AHCT240
Nexperia
Octal buffer/line driver; inverting; 3-state
14. Legal information
injury, death or severe property or environmental damage. Nexperia and its
suppliers accept no liability for inclusion and/or use of Nexperia products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Data sheet status
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Document status
[1][2]
Product
status [3]
Definition
Objective [short]
data sheet
Development
This document contains data from
the objective specification for
product development.
Preliminary [short]
data sheet
Qualification
This document contains data from
the preliminary specification.
Product [short]
data sheet
Production
This document contains the product
specification.
[1]
[2]
[3]
Please consult the most recently issued document before initiating or
completing a design.
The term 'short data sheet' is explained in section "Definitions".
The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the internet at https://www.nexperia.com.
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction
of an Nexperia product can reasonably be expected to result in personal
74AHCT240
Product data sheet
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified, the
product is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards,
customer (a) shall use the product without Nexperia’s warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
Nexperia’s specifications such use shall be solely at customer’s own risk,
and (c) customer fully indemnifies Nexperia for any liability, damages or failed
product claims resulting from customer design and use of the product for
automotive applications beyond Nexperia’s standard warranty and Nexperia’s
product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 29 June 2020
©
Nexperia B.V. 2020. All rights reserved
12 / 13
74AHCT240
Nexperia
Octal buffer/line driver; inverting; 3-state
Contents
1. General description...................................................... 1
2. Features and benefits.................................................. 1
3. Ordering information....................................................1
4. Functional diagram.......................................................2
5. Pinning information......................................................2
5.1. Pinning.........................................................................2
5.2. Pin description............................................................. 3
6. Functional description................................................. 3
7. Limiting values............................................................. 3
8. Recommended operating conditions..........................4
9. Static characteristics....................................................4
10. Dynamic characteristics............................................ 5
10.1. Waveforms and test circuit........................................ 6
11. Package outline.......................................................... 8
12. Abbreviations............................................................ 11
13. Revision history........................................................11
14. Legal information......................................................12
©
Nexperia B.V. 2020. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 29 June 2020
74AHCT240
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 29 June 2020
©
Nexperia B.V. 2020. All rights reserved
13 / 13