BAP70-04W

BAP70-04W Silicon PIN diode Rev. 02 — 3 April 2007 Product data sheet 1. Product profile 1.1 General description Two planar PIN diodes in series configuration in a SOT323 small SMD plastic package. 1.2 Features I High voltage current control RF resistor for RF attenuators I Low diode capacitance I Low series inductance 1.3 Applications I RF attenuators and switches 2. Pinning information Table 1. Pin 1 2 3 Pinning Description anode cathode common connection 3 3 Simplified outline Symbol 2 1 sym015 1 2 sot323_so 3. Ordering information Table 2. Ordering information Package Name BAP70-04W Description plastic surface-mounted package; 3 leads Version SOT323 Type number NXP Semiconductors BAP70-04W Silicon PIN diode 4. Marking Table 3. Marking codes Marking code 1Np Type number BAP70-04W 5. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Per diode VR IF Ptot Tstg Tj continuous reverse voltage continuous forward current total power dissipation storage temperature junction temperature Ts = 90 °C −65 −65 50 100 260 +150 +150 V mA mW °C °C Parameter Conditions Min Max Unit 6. Thermal characteristics Table 5. Symbol Rth(j-s) Thermal characteristics Parameter thermal resistance from junction to soldering point Conditions Typ 230 Unit K/W 7. Characteristics Table 6. Characteristics Tamb = 25 °C unless otherwise specified. Symbol Per diode VF IR Cd forward voltage reverse current diode capacitance IF = 50 mA VR = 50 V see Figure 1; f = 1 MHz VR = 0 V VR = 1 V VR = 20 V rD diode forward resistance see Figure 2; f = 100 MHz IF = 0.5 mA IF = 1 mA IF = 10 mA IF = 100 mA τL LS BAP70-04W_2 Parameter Conditions Min - Typ 0.95 600 430 250 77 40 5.4 1.4 1.25 1.4 Max 1.1 100 300 100 50 7 1.9 - Unit V nA fF fF fF Ω Ω Ω Ω µs nH 2 of 7 charge carrier life time series inductance when switched from IF = 10 mA to IR = 6 mA; RL = 100 Ω; measured at IR = 3 mA IF = 100 mA; f = 100 MHz Rev. 02 — 3 April 2007 © NXP B.V. 2007. All rights reserved. Product data sheet NXP Semiconductors BAP70-04W Silicon PIN diode 600 Cd (fF) 500 001aaa461 103 rD (Ω) mce007 102 400 10 300 200 0 5 10 15 VR (V) 20 1 10−1 1 10 IF (mA) 102 f = 1 MHz; Tj = 25 °C f = 100 MHz; Tj = 25 °C Fig 1. Diode capacitance as a function of reverse voltage; typical values Fig 2. Forward resistance as a function of forward current; typical values BAP70-04W_2 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 02 — 3 April 2007 3 of 7 NXP Semiconductors BAP70-04W Silicon PIN diode 8. Package outline Plastic surface-mounted package; 3 leads SOT323 D B E A X y HE vMA 3 Q A A1 c 1 e1 e bp 2 wM B Lp detail X 0 1 scale 2 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.8 A1 max 0.1 bp 0.4 0.3 c 0.25 0.10 D 2.2 1.8 E 1.35 1.15 e 1.3 e1 0.65 HE 2.2 2.0 Lp 0.45 0.15 Q 0.23 0.13 v 0.2 w 0.2 OUTLINE VERSION SOT323 REFERENCES IEC JEDEC JEITA SC-70 EUROPEAN PROJECTION ISSUE DATE 04-11-04 06-03-16 Fig 3. Package outline SOT323 BAP70-04W_2 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 02 — 3 April 2007 4 of 7 NXP Semiconductors BAP70-04W Silicon PIN diode 9. Revision history Table 7. Revision history Release date 20070403 Data sheet status Product data sheet Change notice Supersedes BAP70-04W_1 Document ID BAP70-04W_2 Modifications: • • • The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors. Legal texts have been adapted to the new company name where appropriate. Table 6: changed max value of reverse current from 20 nA to 100 nA. Product data - BAP70-04W_1 (9397 750 12557) 20040305 BAP70-04W_2 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 02 — 3 April 2007 5 of 7 NXP Semiconductors BAP70-04W Silicon PIN diode 10. Legal information 10.1 Data sheet status Document status[1][2] Objective [short] data sheet Preliminary [short] data sheet Product [short] data sheet [1] [2] [3] Product status[3] Development Qualification Production Definition This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification. Please consult the most recently issued document before initiating or completing a design. The term ‘short data sheet’ is explained in section “Definitions”. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 10.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. malfunction of a NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. 10.3 Disclaimers General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or 10.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 11. Contact information For additional information, please visit: http://www.nxp.com For sales office addresses, send an email to: salesaddresses@nxp.com BAP70-04W_2 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 02 — 3 April 2007 6 of 7 NXP Semiconductors BAP70-04W Silicon PIN diode 12. Contents 1 1.1 1.2 1.3 2 3 4 5 6 7 8 9 10 10.1 10.2 10.3 10.4 11 12 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Legal information. . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information. . . . . . . . . . . . . . . . . . . . . . Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 1 2 2 2 2 4 5 6 6 6 6 6 6 7 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2007. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 3 April 2007 Document identifier: BAP70-04W_2