BAP70Q,125

BAP70Q Quad PIN diode attenuator Rev. 3 — 3 August 2018 1 Product data sheet Product profile 1.1 General description Quad PIN diode in an SOT753 package. 1.2 Features and benefits • • • • • • • • 4 PIN diodes in a SOT753 package 300 kHz to 4 GHz High linearity Low insertion loss Reduction in part count Low diode capacitance Low diode forward resistance AEC-Q101 qualified 1.3 Applications • Broadband system applications i.e. WCDMA, CATV, etc. • General-purpose Voltage Controlled Attenuators for high linearity applications BAP70Q NXP Semiconductors Quad PIN diode attenuator 2 Pinning information Table 1. Discrete pinning 3 Pin Description 1 RF in 2 series bias 3 RF out 4 shunt 1 bias 5 shunt 2 bias Simplified outline 5 1 Graphic symbol 4 2 5 3 4 1 2 3 sym142 Ordering information Table 2. Ordering information Type number Package BAP70Q 4 Name Description Version SC-74A plastic surface-mounted package; 5 leads SOT753 Marking code Table 3. Marking 5 Type number Marking code BAP70Q A2 Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Min Max Unit reverse voltage [1] - 50 V forward current [1] - 100 mA Ptot total power dissipation [1] - 125 mW Tstg storage temperature -65 +150 °C Tj junction temperature -65 +150 °C VR IF [1] 6 Conditions Tsp ≤ 90 °C single diode. Thermal characteristics Table 5. Thermal characteristics BAP70Q Product data sheet Symbol Parameter Conditions Rth(j-sp) thermal resistance from junction to solder point All information provided in this document is subject to legal disclaimers. Rev. 3 — 3 August 2018 Typ Unit 350 K/W © NXP B.V. 2018. All rights reserved. 2 / 15 BAP70Q NXP Semiconductors Quad PIN diode attenuator 7 Characteristics Table 6. Characteristics Tj = 25 °C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit Per diode VF forward voltage IF = 50 mA - 0.95 1.1 IR reverse current VR = 50 V - - 100 nA Cd diode capacitance f = 1 MHz (see Figure 1) VR = 0 V - 600 - fF VR = 1 V - 430 - fF VR = 20 V - 250 300 fF IF = 0.5 mA - 77 100 Ω IF = 1 mA - 40 50 Ω IF = 10 mA - 5.4 7 Ω IF = 100 mA - 1.4 1.9 Ω - 1.25 - μs rD τL BAP70Q Product data sheet diode forward resistance charge carrier life time V f = 100 MHz (see Figure 2) when switched from IF = 10 mA to IR = 6 mA; RL = 100 Ω; measured at IR = 3 mA All information provided in this document is subject to legal disclaimers. Rev. 3 — 3 August 2018 © NXP B.V. 2018. All rights reserved. 3 / 15 BAP70Q NXP Semiconductors Quad PIN diode attenuator 8 Graphical data 001aam719 600 001aam720 103 rD (Ω) Cd (fF) 500 102 400 10 300 200 0 5 10 15 VR (V) 20 1 10- 1 1 10 IF (mA) 102 f = 1 MHz; Tj = 25 °C. f = 100 MHz; Tj = 25 °C. Figure 1. Diode capacitance as a function of reverse voltage (typical values) Figure 2. Diode forward resistance as a function of forward current (typical values) BAP70Q Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 3 — 3 August 2018 © NXP B.V. 2018. All rights reserved. 4 / 15 BAP70Q NXP Semiconductors Quad PIN diode attenuator 9 Application information 9.1 Application circuit C1 R3 RFin/out C2 2 3 Vctrl C3 RFin/out 1 BAP70Q 4 R1 5 R4 R5 C4 R6 R2 C5 VCC 001aam673 Figure 3. Wideband Quad PIN diode Π attenuator circuit Table 7. List of components used for the typical application Component Description Conditions Value C1; C2; C3; C4; C5 chip capacitor VCC = 3.7 V 47 nF VCC = 5 V 47 nF VCC = 3.7 V 560 Ω VCC = 5 V 910 Ω VCC = 3.7 V 330 Ω VCC = 5 V 1000 Ω VCC = 3.7 V 1500 Ω VCC = 5 V 2000 Ω VCC = 3.7 V 680 Ω VCC = 5 V 1000 Ω R1; R2 R3 R4; R5 R6 BAP70Q Product data sheet chip resistor chip resistor chip resistor chip resistor All information provided in this document is subject to legal disclaimers. Rev. 3 — 3 August 2018 © NXP B.V. 2018. All rights reserved. 5 / 15 BAP70Q NXP Semiconductors Quad PIN diode attenuator 9.2 Quad PIN pi attenuator characteristics Table 8. Typical performance for BAP70Q quad PIN diode Π attenuator VCC = 3.7 V; Tamb = 25 °C unless otherwise specified. Symbol Parameter Test Conditions Typ Units Lins insertion loss VC = 10 V; f = 1 GHz 3 dB RLin input return loss VC = 0 V; f = 1 GHz 24 dB ɑ attenuation VC = 0 V; f = 1 GHz 44 dB IP3i input third-order intercept point f = 0.1 GHz Vctrl = 2 V 38 dBm Vctrl = 10 V 45 dBm Vctrl = 2 V 45 dBm Vctrl = 10 V 45 dBm Vctrl = 2 V 45 dBm Vctrl = 10 V 45 dBm Vctrl = 2 V 44 dBm Vctrl = 10 V 44 dBm f = 0.9 GHz f = 1.8 GHz f = 2.1 GHz BAP70Q Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 3 — 3 August 2018 © NXP B.V. 2018. All rights reserved. 6 / 15 BAP70Q NXP Semiconductors Quad PIN diode attenuator 001aam674 0 (8) Lins (dB) (10) (9) (7) - 20 (6) (5) (4) - 40 (3) (2) - 60 (1) - 80 10 102 103 f (MHz) 104 VCC = 3.7 V; Tamb = 25 °C. (1) Vctrl = 0 V (2) Vctrl = 1 V (3) Vctrl = 1.1 V (4) Vctrl = 1.2 V (5) Vctrl = 1.3 V (6) Vctrl = 1.5 V (7) Vctrl = 2 V (8) Vctrl = 4 V (9) Vctrl = 7.5 V (10) Vctrl = 10 V Figure 4. Insertion loss as function of frequency (typical values) BAP70Q Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 3 — 3 August 2018 © NXP B.V. 2018. All rights reserved. 7 / 15 BAP70Q NXP Semiconductors Quad PIN diode attenuator 001aam675 0 RLin (dB) (1) α (dB) - 10 001aam676 80 (2) 60 (2) (3) - 20 40 - 30 - 40 20 (1) 10 102 103 (4) 0 10- 1 104 f (MHz) 1 10 Vctrl (V) 102 VCC = 3.7 V; Tamb = 25 °C. (1) Vctrl = 0 V (2) Vctrl = 15 V VCC = 3.7 V; Tamb = 25 °C. (1) f = 10 MHz (2) f = 100 MHz (3) f = 1000 MHz (4) f = 3000 MHz Figure 5. Return loss as function of frequency (typical values) Figure 6. Attenuation as function of control voltage (typical values) 001aam677 102 001aam678 102 (1) (1) (2) (2) α (dB) α (dB) (3) (3) (4) (4) 10 1 - 40 10 0 VCC = 3.7 V; f = 100 MHz. (1) Vctrl = 0 V (2) Vctrl = 1 V (3) Vctrl = 1.5 V (4) Vctrl = 2 V (5) Vctrl = 7.5 V (6) Vctrl = 10 V 40 (5) (5) (6) (6) Tamb (°C) 80 1 - 40 0 40 Tamb (°C) 80 VCC = 3.7 V; f = 1000 MHz. (1) Vctrl = 0 V (2) Vctrl = 1 V (3) Vctrl = 1.5 V (4) Vctrl = 2 V (5) Vctrl = 7.5 V (6) Vctrl = 10 V Figure 7. Attenuation as function of temperature (typical Figure 8. Attenuation as function of temperature (typical values) values) BAP70Q Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 3 — 3 August 2018 © NXP B.V. 2018. All rights reserved. 8 / 15 BAP70Q NXP Semiconductors Quad PIN diode attenuator 001aam679 102 001aam680 102 (1) (2) α (dB) (1) (2) α (dB) (3) (3) (4) (4) 10 1 - 40 10 (5) (5) (6) (6) 0 40 Tamb (°C) 1 - 40 80 VCC = 3.7 V; f = 2000 MHz. (1) Vctrl = 0 V (2) Vctrl = 1 V (3) Vctrl = 1.5 V (4) Vctrl = 2 V (5) Vctrl = 7.5 V (6) Vctrl = 10 V 0 40 Tamb (°C) 80 VCC = 3.7 V; f = 3000 MHz. (1) Vctrl = 0 V (2) Vctrl = 1 V (3) Vctrl = 1.5 V (4) Vctrl = 2 V (5) Vctrl = 7.5 V (6) Vctrl = 10 V Figure 9. Attenuation as function of temperature (typical Figure 10. Attenuation as function of temperature values) (typical values) 001aam681 50 IP3i (dBm) 40 (4) (3) (2) (1) 30 20 10 0 0 4 8 12 16 Vctrl (V) 20 VCC = 3.7 V; Tamb = 25 °C. (1) f = 100 MHz (2) f = 900 MHz (3) f = 1800 MHz (4) f = 2100 MHz Figure 11. Input third-order intercept point as control voltage (typical values) BAP70Q Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 3 — 3 August 2018 © NXP B.V. 2018. All rights reserved. 9 / 15 BAP70Q NXP Semiconductors Quad PIN diode attenuator 10 Package outline Plastic surface-mounted package; 5 leads SOT753 D B E y A X HE 5 v M A 4 Q A A1 c 1 2 3 Lp detail X bp e w M B 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 bp c D E e HE Lp Q v w y mm 1.1 0.9 0.100 0.013 0.40 0.25 0.26 0.10 3.1 2.7 1.7 1.3 0.95 3.0 2.5 0.6 0.2 0.33 0.23 0.2 0.2 0.1 OUTLINE VERSION REFERENCES IEC SOT753 JEDEC JEITA SC-74A EUROPEAN PROJECTION ISSUE DATE 02-04-16 06-03-16 Figure 12. Package outline SOT753 BAP70Q Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 3 — 3 August 2018 © NXP B.V. 2018. All rights reserved. 10 / 15 BAP70Q NXP Semiconductors Quad PIN diode attenuator 11 Abbreviations Table 9. Abbreviations BAP70Q Product data sheet Acronym Description PIN P-type, intrinsic, N-type RF radio frequency All information provided in this document is subject to legal disclaimers. Rev. 3 — 3 August 2018 © NXP B.V. 2018. All rights reserved. 11 / 15 BAP70Q NXP Semiconductors Quad PIN diode attenuator 12 Revision history Table 10. Revision history Document ID Release date Data sheet status Change notice Supersedes BAP70Q v.3 20181211 Product data sheet - BAP70Q v.2 Modifications: • Section 1.2 "Features and benefits" has been updated. • Changed to non automotive legal information • The "Legal information" pages have been updated. BAP70Q v.2 20120306 Product data sheet - BAP70Q v.1 BAP70Q v.1 20101006 Product data sheet - - BAP70Q Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 3 — 3 August 2018 © NXP B.V. 2018. All rights reserved. 12 / 15 BAP70Q NXP Semiconductors Quad PIN diode attenuator 13 Legal information 13.1 Data sheet status Document status [1][2] Product status [3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] [2] [3] Please consult the most recently issued document before initiating or completing a design. The term 'short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. notice. This document supersedes and replaces all information supplied prior to the publication hereof. 13.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 13.3 Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without BAP70Q Product data sheet Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. All information provided in this document is subject to legal disclaimers. Rev. 3 — 3 August 2018 © NXP B.V. 2018. All rights reserved. 13 / 15 BAP70Q NXP Semiconductors Quad PIN diode attenuator No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products — Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of nonautomotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors’ warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP BAP70Q Product data sheet Semiconductors’ specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors’ standard warranty and NXP Semiconductors’ product specifications. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. Security — While NXP Semiconductors has implemented advanced security features, all products may be subject to unidentified vulnerabilities. Customers are responsible for the design and operation of their applications and products to reduce the effect of these vulnerabilities on customer’s applications and products, and NXP Semiconductors accepts no liability for any vulnerability that is discovered. Customers should implement appropriate design and operating safeguards to minimize the risks associated with their applications and products. 13.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. All information provided in this document is subject to legal disclaimers. Rev. 3 — 3 August 2018 © NXP B.V. 2018. All rights reserved. 14 / 15 BAP70Q NXP Semiconductors Quad PIN diode attenuator Contents 1 1.1 1.2 1.3 2 3 4 5 6 7 8 9 9.1 9.2 10 11 12 13 Product profile .................................................... 1 General description ............................................1 Features and benefits ........................................1 Applications ........................................................1 Pinning information ............................................ 2 Ordering information .......................................... 2 Marking code .......................................................2 Limiting values .................................................... 2 Thermal characteristics ......................................2 Characteristics .................................................... 3 Graphical data ..................................................... 4 Application information ......................................5 Application circuit ...............................................5 Quad PIN pi attenuator characteristics .............. 6 Package outline .................................................10 Abbreviations .................................................... 11 Revision history ................................................ 12 Legal information .............................................. 13 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section 'Legal information'. © NXP B.V. 2018. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 3 August 2018 Document identifier: BAP70Q