BB152_04

DISCRETE SEMICONDUCTORS DATA SHEET BB152 VHF variable capacitance diode Product specification Supersedes data of 1998 Sep 09 2004 Feb 25 Philips Semiconductors Product specification VHF variable capacitance diode FEATURES • High linearity • Excellent matching to 2% DMA • Very small plastic SMD package • C28: 2.7 pF; ratio: 22 • Low series resistance. APPLICATIONS • Electronic tuning in VHF television tuners, band A up to 160 MHz • Voltage controlled oscillators (VCO). DESCRIPTION The BB152 is a planar technology variable capacitance diode, in a SOD323 (SC-76) package. The excellent matching performance is achieved by gliding matching and a direct matching assembly procedure. ORDERING INFORMATION TYPE NUMBER BB152 PACKAGE NAME − DESCRIPTION plastic surface mounted package; 2 leads Marking code: PB. The marking bar indicates the cathode. 1 2 BB152 PINNING PIN 1 2 cathode anode DESCRIPTION Top view sym008 Fig.1 Simplified outline (SOD323; SC-76) and symbol. VERSION SOD323 LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VR VRM IF Tstg Tj PARAMETER continuous reverse voltage peak reverse voltage continuous forward current storage temperature operating junction temperature in series with a 10 kΩ resistor CONDITIONS MIN. − − − −55 −55 MAX. 32 35 20 +150 +125 UNIT V V mA °C °C 2004 Feb 25 2 Philips Semiconductors Product specification VHF variable capacitance diode ELECTRICAL CHARACTERISTICS Tj = 25 °C unless otherwise specified. SYMBOL IR rs Cd C d ( 1V ) ---------------C d ( 2V ) C d ( 1V ) -----------------C d ( 28V ) C d ( 25V ) -----------------C d ( 28V ) ∆C d --------Cd PARAMETER reverse current diode series resistance diode capacitance capacitance ratio CONDITIONS VR = 30 V; see Fig.3 VR = 30 V; Tj = 85 °C; see Fig.3 f = 100 MHz; Cd = 30 pF VR = 1 V; f = 1 MHz; see Figs 2 and 4 f = 1 MHz MIN. − − − 52 − TYP. − − 1 − − 1.31 BB152 MAX. 10 200 1.2 62 2.89 − − − UNIT nA nA Ω pF pF VR = 28 V; f = 1 MHz; see Figs 2 and 4 2.48 capacitance ratio f = 1 MHz 20.6 − capacitance ratio f = 1 MHz − − 1.05 capacitance matching VR = 1 to 28 V; in a sequence of 15 diodes (gliding) − 2 % 2004 Feb 25 3 Philips Semiconductors Product specification VHF variable capacitance diode GRAPHICAL DATA BB152 80 Cd (pF) 60 mbk439 40 20 0 10−1 1 10 VR (V) 102 f = 1 MHz; Tj = 25 °C. Fig.2 Diode capacitance as a function of reverse voltage; typical values. 103 IR (nA) mlc816 10 3 handbook, halfpage MLC815 TC d (K−1) 102 10 4 10 0 50 Tj (°C) 100 10 5 10 1 1 10 VR (V) 102 Tj = 0 °C to 85 °C Fig.4 Fig.3 Reverse current as a function of junction temperature; maximum values. Temperature coefficient of diode capacitance as a function of reverse voltage; typical values. 2004 Feb 25 4 Philips Semiconductors Product specification VHF variable capacitance diode PACKAGE OUTLINE Plastic surface mounted package; 2 leads BB152 SOD323 D A E X HD v M A Q 1 2 bp A A1 (1) c Lp detail X 0 1 scale 2 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.8 A1 max 0.05 bp 0.40 0.25 c 0.25 0.10 D 1.8 1.6 E 1.35 1.15 HD 2.7 2.3 Lp 0.45 0.15 Q 0.25 0.15 v 0.2 Note 1. The marking bar indicates the cathode OUTLINE VERSION SOD323 REFERENCES IEC JEDEC JEITA SC-76 EUROPEAN PROJECTION ISSUE DATE 99-09-13 03-12-17 2004 Feb 25 5 Philips Semiconductors Product specification VHF variable capacitance diode DATA SHEET STATUS LEVEL I DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2)(3) Development DEFINITION BB152 This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). II Preliminary data Qualification III Product data Production Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS Short-form specification  The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition  Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information  Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes  Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 2004 Feb 25 6 Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. © Koninklijke Philips Electronics N.V. 2004 SCA76 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands R77/02/pp7 Date of release: 2004 Feb 25 Document order number: 9397 750 12645