BGY67_01

DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D252 BGY67 200 MHz, 22 dB gain reverse amplifier Product specification Supersedes data of 1997 Apr 15 2001 Oct 18 Philips Semiconductors Product specification 200 MHz, 22 dB gain reverse amplifier FEATURES • Excellent linearity • Extremely low noise • Silicon nitride passivation • Rugged construction • TiPtAu metallized crystals ensure optimal reliability. DESCRIPTION Hybrid amplifier module for CATV systems operating over a frequency range of 5 to 200 MHz at a voltage supply of +24 V (DC). The device is intended as a reverse amplifier for use in two way systems. QUICK REFERENCE DATA SYMBOL Gp Itot PARAMETER power gain total current consumption (DC) CONDITIONS f = 10 MHz VB = +24 V MIN. 21.5 − TYP. − 215 PINNING - SOT115J PIN 1 2 3 5 7 8 9 DESCRIPTION input common common +VB common common output Side view fpage BGY67 PIN CONFIGURATION 1 2 3 8 579 MSA319 Fig.1 Simplified outline. MAX. 22.5 230 UNIT dB mA LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL Vi Tstg Tmb RF input voltage storage temperature mounting base operating temperature PARAMETER − −40 −20 MIN. MAX. 65 +100 +90 UNIT dBmV °C °C 2001 Oct 18 2 Philips Semiconductors Product specification 200 MHz, 22 dB gain reverse amplifier CHARACTERISTICS Table 1 Bandwidth 5 to 200 MHz; Tmb = 30 °C; ZS = ZL = 75 Ω PARAMETER power gain slope cable equivalent flatness of frequency response input return losses output return losses composite triple beat cross modulation second order distortion output voltage noise figure total current consumption CONDITIONS f = 10 MHz f = 5 to 200 MHz f = 5 to 200 MHz f = 5 to 200 MHz f = 5 to 200 MHz MIN. 21.5 −0.2 − 20 20 TYP. − − − − − − − − − − − 215 BGY67 SYMBOL Gp SL FL S11 S22 CTB Xmod d2 Vo F Itot Notes MAX. 22.5 +0.5 ±0.2 − − −67 −60 −67 − − 5.5 230 UNIT dB dB dB dB dB dB dB dB dBmV dBmV dB mA 22 channels flat; Vo = 50 dBmV; − measured at 175.25 MHz 22 channels flat; Vo = 50 dBmV; − measured at 55.25 MHz Vo = 50 dBmV; note 1 dim = −60 dB; note 2 dim = −60 dB; note 3 f = 200 MHz DC value; VB = +24 V; note 4 − 67 64 − − 1. fp = 83.25 MHz; Vp = 50 dBmV; fq = 109.25 MHz; Vq = 50 dBmV; measured at fp + fq = 192.5 MHz. 2. Measured according to DIN45004B; fp = 35.25 MHz; Vo = Vp; fq = 42.25 MHz; Vq = Vo −6 dB; fr = 44.25 MHz; Vr = Vo −6 dB; measured at fp + fq − fr = 33.25 MHz. 3. Measured according to DIN45004B; fp = 187.25 MHz; Vo = Vp; fq = 194.25 MHz; Vq = Vo −6 dB; fr = 196.25 MHz; Vr = Vo −6 dB; measured at fp + fq − fr = 185.25 MHz. 4. The module normally operates at VB = +24 V, but is able to withstand supply transients up to +30 V. 2001 Oct 18 3 Philips Semiconductors Product specification 200 MHz, 22 dB gain reverse amplifier PACKAGE OUTLINE Rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads BGY67 SOT115J D E Z p A2 1 A L F S W d U2 B yMB p Q e e1 q2 q1 yMB yMB b wM 2 3 5 7 8 9 c U1 q 0 5 scale 10 mm DIMENSIONS (mm are the original dimensions) UNIT A2 A max. max. 9.1 b c d D E max. max. max. e e1 F L min. 8.8 p 4.15 3.85 Q max. 2.4 q q1 q2 S U1 U2 max. 8 W w y 0.1 Z max. 3.8 mm 20.8 0.51 0.25 27.2 2.54 13.75 2.54 5.08 12.7 0.38 38.1 25.4 10.2 4.2 44.75 6-32 0.25 UNC OUTLINE VERSION SOT115J REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE 99-02-06 2001 Oct 18 4 Philips Semiconductors Product specification 200 MHz, 22 dB gain reverse amplifier DATA SHEET STATUS DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2) Development DEFINITIONS BGY67 This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. Preliminary data Qualification Product data Production Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS Short-form specification  The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition  Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information  Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes  Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 2001 Oct 18 5 Philips Semiconductors Product specification 200 MHz, 22 dB gain reverse amplifier NOTES BGY67 2001 Oct 18 6 Philips Semiconductors Product specification 200 MHz, 22 dB gain reverse amplifier NOTES BGY67 2001 Oct 18 7 Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. © Koninklijke Philips Electronics N.V. 2001 SCA73 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613518/03/pp8 Date of release: 2001 Oct 18 Document order number: 9397 750 08799