BSV52

DISCRETE SEMICONDUCTORS DATA SHEET dbook, halfpage M3D088 BSV52 NPN switching transistor Product data sheet Supersedes data of 1999 Apr 15 2004 Jan 14 NXP Semiconductors Product data sheet NPN switching transistor FEATURES • Low current (max. 100 mA) • Low voltage (max. 12 V). APPLICATIONS • High speed saturated switching applications, especially in portable equipment. DESCRIPTION NPN switching transistor in a SOT23 plastic package. 1 handbook, halfpage BSV52 PINNING PIN 1 2 3 base emitter collector DESCRIPTION 3 3 MARKING TYPE NUMBER BSV52 Note 1. * = p : Made in Hong Kong. * = t : Made in Malaysia. * = W: Made in China. ORDERING INFORMATION TYPE NUMBER BSV52 PACKAGE NAME − DESCRIPTION plastic surface mounted package; 3 leads VERSION SOT23 Fig.1 Simplified outline (SOT23) and symbol. MARKING CODE(1) B2* Top view 1 2 MAM255 2 LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VCBO VCEO VEBO IC ICM IBM Ptot Tstg Tj Tamb PARAMETER collector-base voltage collector-emitter voltage emitter-base voltage collector current (DC) peak collector current peak base current total power dissipation storage temperature junction temperature operating ambient temperature Tamb ≤ 25 °C CONDITIONS open emitter open base open collector − − − − − − − −65 − −65 MIN. MAX. 20 12 5 100 200 100 250 +150 150 +150 V V V mA mA mA mW °C °C °C UNIT 2004 Jan 14 2 NXP Semiconductors Product data sheet NPN switching transistor THERMAL CHARACTERISTICS SYMBOL Rth(j-a) Note 1. Transistor mounted on an FR4 printed-circuit board. CHARACTERISTICS Tj = 25 °C unless otherwise specified. SYMBOL ICBO IEBO hFE PARAMETER collector cut-off current emitter cut-off current DC current gain CONDITIONS IE = 0; VCB = 20 V IE = 0; VCB = 20 V; Tj = 125 °C IC = 0; VEB = 4 V VCE = 1 V I C = 1 mA IC = 10 mA IC = 50 mA VCEsat collector-emitter saturation voltage IC = 10 mA; IB = 300 µA IC = 10 mA; IB = 1 mA IC = 50 mA; IB = 5 mA VBEsat Cc Ce fT ton td tr toff ts tf base-emitter saturation voltage collector capacitance emitter capacitance transition frequency IC = 10 mA; IB = 1 mA IC = 50 mA; IB = 5 mA IE = ie = 0; VCB = 5 V; f = 1 MHz IC = ic = 0; VEB = 1 V; f = 1 MHz IC = 10 mA; VCE = 10 V; f = 100 MHz ICon = 10 mA; IBon = 3 mA; IBoff = −1.5 mA 25 40 25 − − − 700 − − − 400 − − − − − − − − − − − − − − − − 500 − − − − − − − MIN. − − − TYP. − − − PARAMETER thermal resistance from junction to ambient note 1 CONDITIONS VALUE 500 BSV52 UNIT K/W MAX. UNIT 400 30 100 nA µA nA 120 − 300 250 400 850 1. 2 4 4.5 − mV mV mV mV V pF pF MHz Switching times (between 10% and 90% levels); (see Fig.2) turn-on time delay time rise time turn-off time storage time fall time 10 4 6 20 10 10 ns ns ns ns ns ns 2004 Jan 14 3 NXP Semiconductors Product data sheet NPN switching transistor BSV52 handbook, full pagewidth VBB VCC RB oscilloscope Vi R1 (probe) 450 Ω R2 RC Vo (probe) 450 Ω DUT oscilloscope MLB826 Vi = 0.5 V to 4.2 V; T = 500 µs; tp = 10 µs; tr = ts ≤ 3 ns. R1 = 56 Ω; R2 = 1 kΩ; RB = 1 kΩ; RC = 270 Ω. VBB = 0.2 V; VCC = 2.7 V. Oscilloscope: input impedance Zi = 50 Ω. Fig.2 Test circuit for switching times. 2004 Jan 14 4 NXP Semiconductors Product data sheet NPN switching transistor PACKAGE OUTLINE Plastic surface-mounted package; 3 leads BSV52 SOT23 D B E A X HE vMA 3 Q A A1 1 e1 e bp 2 wMB detail X Lp c 0 1 scale 2 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.9 A1 max. 0.1 bp 0.48 0.38 c 0.15 0.09 D 3.0 2.8 E 1.4 1.2 e 1.9 e1 0.95 HE 2.5 2.1 Lp 0.45 0.15 Q 0.55 0.45 v 0.2 w 0.1 OUTLINE VERSION SOT23 REFERENCES IEC JEDEC TO-236AB JEITA EUROPEAN PROJECTION ISSUE DATE 04-11-04 06-03-16 2004 Jan 14 5 NXP Semiconductors Product data sheet NPN switching transistor DATA SHEET STATUS DOCUMENT STATUS(1) Objective data sheet Preliminary data sheet Product data sheet Notes 1. Please consult the most recently issued document before initiating or completing a design. PRODUCT STATUS(2) Development Qualification Production DEFINITION BSV52 This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification. 2. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. DISCLAIMERS General ⎯ Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes ⎯ NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use ⎯ NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications ⎯ Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values ⎯ Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions 2004 Jan 14 6 above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale ⎯ NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license ⎯ Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control ⎯ This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Quick reference data ⎯ The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. NXP Semiconductors Customer notification This data sheet was changed to reflect the new company name NXP Semiconductors, including new legal definitions and disclaimers. No changes were made to the technical content, except for package outline drawings which were updated to the latest version. Contact information For additional information please visit: http://www.nxp.com For sales offices addresses send e-mail to: salesaddresses@nxp.com © NXP B.V. 2009 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands R75/04/pp7 Date of release: 2004 Jan 14 Document order number: 9397 750 12431