CLRC66303HN

NFC frontend CLRC663 plus push your design further – best performance at lowest power consumption LAURENT DARDÉ JÜRGEN SCHRODER PUBLIC NEXT GENERATION HIGH-PERFORMANCE MULTI-PROTOCOL NFC FRONTEND NFC product portfolio Connected NFC tag solutions Our connected NFC tag solutions include a NFC Forum RF interface, an EEPROM, and a field-detection function (NTAG F) or a field- detection function with an I²C interface (NTAG I²C plus). NFC frontend solutions Our standalone frontends, which work seamlessly with the NFC Reader Library, are the most flexible way to add NFC to a system. NFC controller solutions Our NFC controller solutions enable higher integration with fewer components combining an NFC frontend with an advanced 32-bit microcontroller. Options include integrated firmware, for an easy, standardized interface, or a freely programmable microcontroller with the ability to load fully-custom applications. 1 PUBLIC NFC frontend CLRC663 plus Integrated Firmware NFC controller with integrated firmware PN7150 Customizable Firmware NFC controller with custom application PN7462 family CLRC663 plus – push your design further best performance at lowest power consumption extended Low Power Card Detection range with new configuration options low supply voltage for battery support down to 2.5V design flexibility max. operating transmitter current of 350mA with limiting value of 500mA broad temperature range from -40°C to +105°C backward compatibility pin-to-pin and software compatible to CLRC663 faster time-to-market complete support package including EMVCo compliant NFC SW library and NFC Cockpit with VCOM interface and easy antenna configuration 2 PUBLIC CLRC663 plus – product features Characteristics › 350mA maximum operating transmitter current with limiting value of 500mA › Power supply voltage: 2.5 to 5.5V › Extended operating temperature range: -40 to +105°C › 512byte FIFO buffer for highest transaction performance › Flexible and efficient power saving modes including hard power down, standby and low-power card detection › Integrated PLL provides external system clock from 27.12MHz RF crystal Licenses and supported standards › Includes NXP ISO/IEC14443-A, NXP MIFARE® and Innovatron ISO/IEC14443-B licenses › Crypto 1 intellectual property licensing rights › Hardware supports for MIFARE Classic encryption › EMVCo 2.6 L1 analog compliancy on RF level and digital compliancy with NXP NFC reader library Interfaces › Host interfaces: SPI (10Mbit/s), I2C (1000kbit/s) and UART (1228.8kbit/s) › SAM interface in X-mode › Up-to 8 general purpose inputs/outputs 3 PUBLIC Supported RF protocols Reader and Writer mode › ISO/IEC 14443A/MIFARE › ISO/IEC 14443B › JIS X 6319-4 (comparable with FeliCa1 scheme) › ISO/IEC 15693 (ICODE-SLIX, ICODE-DNA) › ISO/IEC 18000-3 mode 3/ EPC Class-1 HF (ICODE-ILT) Peer to Peer mode › Passive-Initiator according to ISO/IEC 14443A (106kbit/s) and FeliCa (212 and 424kbit/s) Allows to read and write › All MIFARE® family: Ultralight, Classic 1K & 4K, DESFire EV1 & EV2 and Plus EV1 › All NTAG® family incl. NTAG I²C plus › All SmartMX® family incl. SmartMX2 P40 & P60 Packages › HVQFN32 › Wettable flanks CLRC663 plus – target markets ACCESS CONTROL • • PAYMENT TERMINAL GAMING • extended Low Power Card Detection range with new configuration options low supply voltage for battery support down to 2.5V • 4 PUBLIC broad temperature range from -40°C to +105°C pin-to-pin and software compatible to CLRC663 • • highest transmitter current EMVCo 2.6 L1 analog and digital compliant POSITIONING 5 PUBLIC CLRC663 plus vs. other NXP NFC frontends Reader Writer PN512 ISO14443(1) Mifare, FeliCa CLRC663 plus ISO14443(1) Mifare, FeliCa ISO15693(2) PN5180 ISO14443(1) Mifare, FeliCa ISO15693(2) NFC tag type emulation ISO/IEC 18092 Target ISO/IEC 18092 Initiator Output Power (TX current) 2, 3, 4A(3) Active & Passive Active & Passive 3.6V output stage (100mA) L1 with booster No NFC & EMVCo Passive 5V output stage (350mA) L1 No NFC & EMVCo Active & Passive 5V output stage (250mA) L1 Yes Full NFC & EMVCo 4A Active & Passive Peer-to-Peer 1. 2. 3. 6 ISO/IEC14443 ISO/IEC15693 No software available for NFC tag type 2 and 3 emulation PUBLIC EMVCo RF Dynamic Power Control SW stack CLRC663 plus vs. PN5180 and PN7462 Feature Comment CLRC663 plus PN5180 PN7462 Package HVQFN32 HVQFN40 TFBGA64 HVQFN64 RF transmitter supply voltage 2.5 to 5.5V 2.7 to 5.5V 3 to 5.5V CLRC663 plus enables better support for battery powered systems General Purpose Input/Output pins (e.g. to drive LEDs) 4 up-to 8 up-to 7 outputs only 12 up-to 21 PN5180 has up-to 7 general purpose outputs on TFBGA64 package only Max. operating transmitter current 350mA (lim. 500mA) 250mA with DPC 250mA with DPC CLRC663 plus enables more flexibility in the antenna design Temperature range -40 to +105°C -30 to +85°C -40 to +85°C CLRC663 plus has an automotive or industrial temperature range range: very good power: best range: best power: good range: best power: good CLRC663 plus offers the lowest power consumption NFC & EMVCo Full NFC & EMVCo Full NFC & EMVCo Full NFC forum certified library; EMVCo 2.6 Waveform Control Yes Yes (adaptive) Yes (adaptive) Adaptive Waveform Control improves wave shape stability under detuned conditions Adaptive Range Control No Yes Yes Freely programmable MCU (flash) No No Cortex M0 (160kB) Host interfaces SPI, I²C, UART SPI SAM Interface Yes with X-mode No Low power card detection Complete set of field proven software libraries 7 PUBLIC CLRC663 plus is pin-to-pin compatible with CLRC663 Adaptive Range Control increases sensibility and robustness under detuned conditions PN7462 enables an 1-chip reader solution USB, HSUART, PN7462 has also two master interfaces (SPI, SPI, I²C I²C) and one contact reader interface Yes The SAM interface allows to store keys in a secure container CLRC663 plus vs. CLRC663 8 PUBLIC CLRC663 plus vs. CLRC663 250mA 350mA 500mA Maximum operating transmitter current increases by 40% for CLRC663 plus with 2x the limiting value of the CLRC663 66mm CLRC663 plus has new configuration options(2) enabling up-to 2.5x the detection range in LPCD(1) mode 105°C CLRC663 plus has an automotive or industrial operating temperature range: -40 to +105°C CLRC663 CLRC663 plus 26mm CLRC663 CLRC663 plus -40°C -25°C 85°C CLRC663 CLRC663 plus 2.5V 3.0V 5.5V CLRC663 plus enables better support for battery powered systems CLRC663 CLRC663 plus 9 PUBLIC 1. 2. Low Power Card Detection New LPCD configuration options are Charge Pump (enabled/disabled) and LPCD Filter (enabled/disabled) CLRC663 plus – LPCD in details Standard (CLRC663) Card type MIFARE® Ultralight NTAG MIFARE DESFire® EV2 JCOP DIF ISO RefPICC Class 6 EMVCo RefPICC 11 mm(2) 19 mm 19 mm 12 mm 4 mm 26 mm Charge pump + Charge pump LPCD_FILTER enabled enabled LPCD_FILTER enabled 16 mm 29 mm 25 mm 24 mm 37 mm 33 mm 24 mm 39 mm 35 mm 17 mm 30 mm 27 mm 7 mm 18 mm 23 mm 29 mm 57 mm 66 mm The basic idea of the LPCD(1) is to provide a function that turns off the RF field when no card is used. This saves energy and allows battery powered NFC Reader designs • The CLRC663 and CLRC663 plus offer a standalone LPCD function, which replaces the normal active card polling that is triggered by the host µController • CLRC663 plus offers additional features to extend the LPCD performance − Charge Pump increases the RF field strength during the RF-on time − LPCD Filter reduces the risk of fail detections especially in case of spike noise • 10 PUBLIC 1. 2. Low Power Card Detection All detection ranges measured using the standard CLRC663 plus development board (CLEV6630B) operated with external power supply at room temperature CLRC663 plus – wettable flank package CLRC663 • CLRC663 plus In the case of standard HVQFN packages (e.g. CLRC663 family), there is no exposed pin to visually determine whether or not the package is successfully soldered onto the PCB. The package edge has exposed copper for the terminals, these are prone to oxidation, making sidewall solder wetting difficult • The CLRC663 plus, with wettable flank HVQFN package, enables 100% automatic visual inspection post-assembly ensuring higher quality of assembly 11 PUBLIC TECHNICAL OVERVIEW 12 PUBLIC CLRC663 plus – quick references • The analog interface handles the modulation and demodulation of the antenna signals for the contactless interface. • The contactless UART manages the protocol dependency of the contactless interface settings managed by the host • The FIFO buffer ensures fast and convenient data transfer between host and the contactless UART • The register bank contains the settings for the analog and digital functionality [1] [2] 13 VDD(PVDD) must always be the same or lower voltage than VDD Ipd is the sum of all supply currents PUBLIC CLRC663 plus – block diagram 14 PUBLIC CLRC663 plus – pinning [1] This pin is used for connection of a buffer capacitor. Connection of a supply voltage might damage the device. 15 PUBLIC PRODUCT SUPPORT PACKAGE 16 PUBLIC CLRC663 plus – development kit and board • The OM26630FDK is a flexible and easy to use frontend development kit for CLRC663 plus • It contains a CLEV6630B board fully supported by the NFC Cockpit and the NFC Reader Library with a 65*65mm² antenna optimized for EMVCo applications and a 30*50mm² antenna with matching components optimized for Access Management applications • It also includes, 3 small antenna matching PCBs for implementation of custom antenna matching circuit, NFC sample cards based on NTAG216F (NFC Forum type 2 tag) and DESFire® EV2, and 10 CLRC663 plus samples in HVQFN package 17 PUBLIC CLRC663 plus – NFC Cockpit • • 18 NFC Cockpit is an intuitive GUI that lets you configure and adapt CLRC663 plus settings without writing a single line of software code This Windows tool features − direct register/EEPROM read/write access and backup of EEPROM settings − RF field control and card operation (Type A, Type B, Type F, ISO15693) − control of test applications like EMVCo Loopback and test signal configuration − LPCD configuration PUBLIC CLRC663 plus – NFC Reader library Scalability – enable only required components and protocol implementations • Optimum performance – built-in MCU support, interrupt-based event handling, free RTOS support and compilers that produce highly compact and efficient code • Faster development – save time and effort by using the APIs and the rich set of sample applications for most common functions • Simpler certification – get ready for certification with test applications for EMVCO L1, NFC Forum and ISO/IEC10373-6 PICC/PCD • 19 PUBLIC Find your NFC toolkit at www.nxp.com NFC use cases 20 NFC community NFC training Use cases & products Online community & technical support Recorded Webinars @ NFC Everywhere Support  NXP community  NFC www.nxp.com/NFC NXP community NFC Support  online academy  NFC webinars NFC webinars PUBLIC NFC product selection guide NFC product selection guide app available Google Play App Store CLRC663 plus – best performance at lowest power consumption • • • • Max. operating transmitter current: 350mA (lim. 500mA) Enhanced LPCD performance and options Broad temperature range from -40°C to +105°C Low supply voltage for battery support down to 2.5V Item 12NC Comment CLRC66303HN, 551 9353 062 08551 CLRC663 plus on single tray CLRC66303HN, 518 9353 062 08518 CLRC663 plus on reel OM26630FDK 9353 391 51699 CLRC663 plus frontend development kit containing a CLEV6630B development board and - an 30*50mm² antenna with matching components and 3 PCBs for individual antenna matching - NTAG216F and MIFARE DESFire EV2 sample cards and 10 CLRC663 plus samples CLEV6630B 9353 391 49699 CLRC663 plus frontend development board with 65*65mm² antenna www.nxp.com/products/:CLRC66303HN www.nxp.com/products/:OM26630FDK 21 PUBLIC