HEF4894BT,112

HEF4894B 12-stage shift-and-store register LED driver Rev. 10 — 23 November 2021 Product data sheet 1. General description The HEF4894B is a 12-stage serial shift register. It has a storage latch associated with each stage for strobing data from the serial input (D) to the parallel LED driver outputs (QP0 to QP11). Data is shifted on positive-going clock (CP) transitions. The data in each shift register stage is transferred to the storage register when the strobe (STR) input is HIGH. Data in the storage register appears at the output whenever the output enable (OE) input signal is HIGH. Two serial outputs (QS1 and QS2) are available for cascading a number of HEF4894B devices. Serial data is available at QS1 on positive-going clock edges to allow high-speed operation in cascaded systems with a fast clock rise time. The same serial data is available at QS2 on the next negative going clock edge. This is used for cascading HEF4894B devices when the clock has a slow rise time. It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS (usually ground). Unused inputs must be connected to VDD, VSS, or another input. 2. Features and benefits • • • • • • • • • Wide supply voltage range from 3.0 V to 15.0 V CMOS low power dissipation High noise immunity Fully static operation 5 V, 10 V, and 15 V parametric ratings Standardized symmetrical output characteristics Complies with JEDEC standard JESD 13-B ESD protection: • HBM JESD22-A114F exceeds 2000 V • MM JESD22-A115-B exceeds 200 V Specified from -40 °C to +85 °C and from -40 °C to +125 °C 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version HEF4894BT -40 °C to +125 °C SO20 plastic small outline package; 20 leads; body width 7.5 mm SOT163-1 HEF4894BTT -40 °C to +125 °C TSSOP20 plastic thin shrink small outline package; 20 leads; body width 4.4 mm SOT360-1 HEF4894B Nexperia 12-stage shift-and-store register LED driver 4. Functional diagram 2 3 1 CP STR D QS1 11 QS2 12 QP0 4 QP1 5 QP2 6 QP3 7 QP4 8 QP5 9 QP6 18 QP7 17 QP8 16 QP9 15 QP10 14 QP11 13 OE 19 Fig. 1. Logic Symbol D CP STR OE 2 12 12-STAGE SHIFT REGISTER 3 11 1 QS2 QS1 12-BIT STORAGE REGISTER 19 OPEN-DRAIN OUTPUTS 4 QP0 Fig. 2. 001aai639 5 QP1 6 QP2 7 QP3 8 QP4 9 QP5 18 QP6 17 QP7 16 QP8 15 QP9 14 QP10 13 QP11 001aag118 Functional diagram HEF4894B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 10 — 23 November 2021 © Nexperia B.V. 2021. All rights reserved 2 / 15 HEF4894B Nexperia 12-stage shift-and-store register LED driver STAGE 0 D D STAGE 1 TO 10 Q D Q10S STAGE 11 D FF0 FF11 CP QS1 Q D CP Q QS2 LATCH CP LE D Q D LATCH Q LATCH LE LE STR OE QP0 QP1 Fig. 3. QP10 QP11 001aag119 Logic diagram 5. Pinning information 5.1. Pinning STR 1 20 VDD D 2 19 OE CP 3 18 QP6 QP0 4 17 QP7 QP1 5 QP2 6 QP3 7 14 QP10 QP4 8 13 QP11 QP5 9 12 QS2 VSS 10 11 QS1 HEF4894B 16 QP8 15 QP9 001aag117 Fig. 4. Pin configuration for SOT163-1 (SO20) and SOT360-1 (TSSOP20) HEF4894B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 10 — 23 November 2021 © Nexperia B.V. 2021. All rights reserved 3 / 15 HEF4894B Nexperia 12-stage shift-and-store register LED driver 5.2. Pin description Table 2. Pin description Symbol Pin Description D 2 serial input QP0 to QP11 4, 5, 6, 7, 8, 9, 18, 17, 16, 15, 14, 13 parallel output QS1 11 serial output QS2 12 serial output CP 3 clock input STR 1 strobe input OE 19 output enable input VDD 20 supply voltage VSS 10 ground (0 V) 6. Functional description Table 3. Function table H = HIGH voltage level; L = LOW voltage level; X = don’t care; ↑ = LOW-to-HIGH clock transition; ↓ = HIGH-to-LOW clock transition; Z = high-impedance OFF-state. th th At the LOW-to-HIGH clock transition, the information in the 10 register stage is transferred to the 11 register stage and the QS output. Control Input Parallel output Serial output CP OE STR D QP0 QPn QS1[1] QS2[2] ↑ L X X Z Z Q10S no change ↓ L X X Z Z no change Q11S ↑ H L X no change no change Q10S no change ↑ H H L Z QPn - 1 Q10S no change ↑ H H H L QPn - 1 Q10S no change ↓ H H H no change no change no change Q11S [1] [2] Q10S = the data in register stage 10 before the LOW-to-HIGH clock transition. Q11S = the data in register stage 11 before the HIGH-to-LOW clock transition. HEF4894B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 10 — 23 November 2021 © Nexperia B.V. 2021. All rights reserved 4 / 15 HEF4894B Nexperia 12-stage shift-and-store register LED driver clock input data input strobe input output enable input internal Q0S (FF 1) QP0 output internal Q10S (FF 11) QP10 output serial QS1 output serial QS2 output Fig. 5. 001aag121 Timing diagram 7. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VDD supply voltage IIK input clamping current VI input voltage IOK output clamping current II input leakage current IO output current Conditions VI < -0.5 V or VI > VDD + 0.5 V Min Max Unit -0.5 +18 V - ±10 mA -0.5 VDD + 0.5 V QSn outputs; VO < -0.5 V or VO > VDD + 0.5 V - ±10 mA QPn outputs; VO < 0.5 V - 40 mA - ±10 mA QSn outputs - ±10 mA QPn outputs - 40 mA Tstg storage temperature -65 +150 °C Tamb ambient temperature -40 +125 °C Ptot total power dissipation Tamb = -40 °C to +125 °C - 500 mW P power dissipation per output - 100 mW [1] [1] For SOT163-1 (SO20) package: Ptot derates linearly with 12.3 mW/K above 109 °C. For SOT360-1 (TSSOP20) package: Ptot derates linearly with 10.0 mW/K above 100 °C. 8. Recommended operating conditions Table 5. Recommended operating conditions Symbol Parameter Conditions Min Typ Max Unit VDD supply voltage 3 - 15 V VI input voltage 0 - VDD V Tamb ambient temperature -40 - +125 °C HEF4894B Product data sheet in free air All information provided in this document is subject to legal disclaimers. Rev. 10 — 23 November 2021 © Nexperia B.V. 2021. All rights reserved 5 / 15 HEF4894B Nexperia 12-stage shift-and-store register LED driver Symbol Parameter Conditions Min Typ Max Unit Δt/ΔV input transition rise and fall rate VDD = 5 V - - 3.75 μs/V VDD = 10 V - - 0.5 μs/V VDD = 15 V - - 0.08 μs/V 9. Static characteristics Table 6. Static characteristics VSS = 0 V; VI = VSS or VDD; unless otherwise specified. Symbol Parameter VIH VIL VOH VOL HIGH-level input voltage LOW-level input voltage Conditions IOL Min Max Min Max Min Max 5V 3.5 - 3.5 - 3.5 - 3.5 - V 10 V 7.0 - 7.0 - 7.0 - 7.0 - V 15 V 11.0 - 11.0 - 11.0 - 11.0 - V 5V - 1.5 - 1.5 - 1.5 - 1.5 V 10 V - 3.0 - 3.0 - 3.0 - 3.0 V 15 V - 4.0 - 4.0 - 4.0 - 4.0 V 5V 4.95 - 4.95 - 4.95 - 4.95 - V 10 V 9.95 - 9.95 - 9.95 - 9.95 - V 15 V 14.95 - 14.95 - 14.95 - 14.95 - V 5V - 0.05 - 0.05 - 0.05 - 0.05 V 10 V - 0.05 - 0.05 - 0.05 - 0.05 V 15 V - 0.05 - 0.05 - 0.05 - 0.05 V 5V - 0.75 - 0.75 - 1.5 - 1.5 V 10 V - 0.75 - 0.75 - 1.5 - 1.5 V 15 V - 0.75 - 0.75 - 1.5 - 1.5 V VO = 2.5 V 5V - -1.7 - -1.4 - -1.1 - -1.1 mA VO = 4.6 V 5V - -0.64 - -0.5 - -0.36 - -0.36 mA VO = 9.5 V 10 V - -1.6 - -1.3 - -0.9 - -0.9 mA VO = 13.5 V 15 V - -4.2 - -3.4 - -2.4 - -2.4 mA |IO| < 1 μA |IO| < 1 μA LOW-level QSn outputs; output voltage |IO| < 1 μA LOW-level output current II input leakage current IOZ OFF-state output current IDD CI QSn outputs QSn outputs VO = 0.4 V 5V 0.64 - 0.5 - 0.36 - 0.36 - mA VO = 0.5 V 10 V 1.6 - 1.3 - 0.9 - 0.9 - mA VO = 1.5 V 15 V 4.2 - 3.2 - 2.4 - 2.4 - mA 15 V - ±0.1 - ±0.1 - ±1.0 - ±1.0 μA 5V - 2 - 2 - 15 - 15 μA 10 V - 2 - 2 - 15 - 15 μA 15 V - 2 - 2 - 15 - 15 μA 5V - 5 - 5 - 150 - 150 μA 10 V - 10 - 10 - 300 - 300 μA 15 V - 20 - 20 - 600 - 600 μA - - - - 7.5 - - - - pF QPn output is HIGH; VO = 15 V supply current IO = 0 A input capacitance HEF4894B Product data sheet Tamb = +25 °C Tamb = +85 °C Tamb = +125 °C Unit Max HIGH-level QSn outputs; output voltage |IO| < 1 μA HIGH-level output current Tamb = -40 °C Min QPn outputs; |IO| < 20 mA IOH VDD All information provided in this document is subject to legal disclaimers. Rev. 10 — 23 November 2021 © Nexperia B.V. 2021. All rights reserved 6 / 15 HEF4894B Nexperia 12-stage shift-and-store register LED driver 10. Dynamic characteristics Table 7. Dynamic characteristics VSS = 0 V; Tamb = 25 °C unless otherwise specified. For test circuit see Fig. 10. Symbol Parameter Conditions VDD tPHL CP to QS1; see Fig. 6 5V HIGH to LOW propagation delay CP to QS2; see Fig. 6 tPLH LOW to HIGH propagation delay CP to QS1; see Fig. 6 CP to QS2; see Fig. 6 tPZL OFF-state to LOW propagation delay CP to QPn; see Fig. 6 STR to QPn; see Fig. 7 tPLZ LOW to OFF-state propagation delay tdis tt tW enable time disable time transition time pulse width Product data sheet Typ Max Unit - 160 320 ns 65 130 ns 10 V 53 ns + (0.23 ns/pF)CL - 15 V 37 ns + (0.16 ns/pF)CL - 45 90 ns 5V 92 ns + (0.55 ns/pF)CL - 120 240 ns 10 V 39 ns + (0.23 ns/pF)CL - 50 100 ns 15 V 32 ns + (0.16 ns/pF)CL - 40 80 ns - 130 260 ns 5V [1] 102 ns + (0.55 ns/pF)CL 10 V 44 ns + (0.23 ns/pF)CL - 55 110 ns 15 V 32 ns + (0.16 ns/pF)CL - 40 80 ns 5V 102 ns + (0.55 ns/pF)CL - 130 260 ns 10 V 49 ns + (0.23 ns/pF)CL - 60 120 ns 15 V 37 ns + (0.16 ns/pF)CL - 45 90 ns 5V - 240 480 ns 10 V - 80 160 ns 15 V - 55 110 ns 5V - 140 280 ns 10 V - 70 140 ns 15 V - 55 110 ns - 170 340 ns - 75 150 ns 15 V - 60 120 ns 5V - 100 200 ns 10 V - 40 100 ns 15 V - 35 70 ns - 100 200 ns 10 V - 55 110 ns 15 V - 50 100 ns OE to QPn; see Fig. 8 OE to QPn; see Fig. 8 5V 5V CP; LOW and HIGH; see Fig. 6 [2] - 80 160 ns 10 V - 40 80 ns 15 V - 30 60 ns [1][3] 35 ns + (1.00 ns/pF)CL - 85 170 ns 10 V 19 ns + (0.42 ns/pF)CL - 40 80 ns 15 V 16 ns + (0.28 ns/pF)CL 5V QS1, QS2; see Fig. 6 STR; HIGH; see Fig. 7 HEF4894B [1] 132 ns + (0.55 ns/pF)CL Min CP to QPn; see Fig. 6 and 5 V Fig. 7 10 V STR to QPn; see Fig. 7 ten Extrapolation formula [2] - 30 60 ns 5V 60 30 - ns 10 V 30 15 - ns 15 V 24 12 - ns 5V 80 40 - ns 10 V 60 30 - ns 15 V 24 12 - ns All information provided in this document is subject to legal disclaimers. Rev. 10 — 23 November 2021 © Nexperia B.V. 2021. All rights reserved 7 / 15 HEF4894B Nexperia 12-stage shift-and-store register LED driver Symbol Parameter Conditions VDD tsu D to CP; see Fig. 9 set-up time th hold time fclk(max) [1] [2] [3] D to CP; see Fig. 9 maximum clock frequency CP; see Fig. 6 Extrapolation formula Min Typ Max Unit 5V 60 30 - ns 10 V 20 10 - ns 15 V 15 5 - ns 5V +5 -15 - ns 10 V 20 5 - ns 15 V 20 5 - ns 5V 5 10 - MHz 10 V 11 22 - MHz 15 V 14 28 - MHz The typical values of the propagation delay and transition times are calculated from the extrapolation formulas shown (CL in pF). ten is the same as tPZL and tdis is the same as tPLZ. tt is the same as tTLH and tTHL. Table 8. Dynamic power dissipation PD can be calculated from the formulas shown. VSS = 0 V; tr = tf ≤ 20 ns; Tamb = 25 °C. Symbol Parameter PD dynamic power dissipation VDD Typical formula Where 5V PD = 1200 x fi + Σ(fo x CL) x VDD μW 2 2 10 V PD = 5550 x fi + Σ(fo x CL) x VDD μW 15 V PD = 15000 x fi + Σ(fo x CL) x VDD μW 2 fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; Σ(fo x CL) = sum of the outputs; VDD = supply voltage in V. 10.1. Waveforms and test circuit 1/fclk(max) VI VM CP input VSS VDD QPn output VOL VOH tW tW tPLZ tPZL VY VX tPLH tPHL 90 % VM QS1 output VOL VOH 10 % tTHL tTLH tPLH tPHL 90 % VM QS2 output VOL 10 % tTLH tTHL 001aag222 Measurement points are given in Table 9. VOL and VOH are typical output voltage levels that occur with the output load. Fig. 6. Propagation delay clock (CP) to output (QPn, QS1, QS2), clock pulse width and maximum clock frequency HEF4894B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 10 — 23 November 2021 © Nexperia B.V. 2021. All rights reserved 8 / 15 HEF4894B Nexperia 12-stage shift-and-store register LED driver Table 9. Measurement points Supply Input Output VDD VM VM VX VY 5 V to 15 V 0.5VDD 0.5VDD 0.1VO 0.9VO VI VM CP input VSS VI STR input VM VSS tW tPLZ VDD tPZL VY QPn output VX VOL 001aag802 Measurement points are given in Table 9. VOL is the typical output voltage level that occurs with the output load. Fig. 7. Strobe (STR) to output (QPn) propagation delays and the strobe pulse width VI OE input VM VSS VDD output LOW to OFF-state OFF-state to LOW VOL tPLZ tPZL VY VX outputs enabled outputs disabled outputs enabled 001aag803 Measurement points are given in Table 9. VOL is the typical output voltage level that occurs with the output load. Fig. 8. Enable and disable times for input OE VI CP input VM VSS tsu VI th tsu th VM D input VSS VDD QPn output VOL 001aag805 Measurement points are given in Table 9. VOL is a typical output voltage level that occurs with the output load. The shaded areas indicate when the input is permitted to change for predictable output performance. Fig. 9. Set-up and hold times for the data input (D) HEF4894B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 10 — 23 November 2021 © Nexperia B.V. 2021. All rights reserved 9 / 15 HEF4894B Nexperia 12-stage shift-and-store register LED driver VI 90 % input pulse VSS 10 % tr tf VEXT VDD VI G RL VO DUT CL RT 001aag804 Test data is given in Table 10. Definitions for test circuit: RL = Load resistance; CL = load capacitance; RT = Termination resistance should be equal to output impedance of Zo of the pulse generator; VEXT = External voltage for measuring switching times. Fig. 10. Test circuit for measuring switching times Table 10. Test data Supply Input VEXT Load VDD VI tr, tf tPLZ, tPZL tPLH, tPHL CL RL 5 V to 15 V VDD ≤ 20 ns VDD open 50 pF 1 kΩ 11. Application information VDD VDD QP0 QP1 VDD D OE PWM dimmer input STR QP10 QP11 HEF4894B QS2 CP VSS QP0 QP1 VDD D OE STR HEF4894B QP10 QP11 QS2 CP VSS CONTROL AND SYNC CIRCUITRY DATA CLOCK from remote processor 001aag122 Application example: serial-to-parallel data converting LED driver. Fig. 11. Serial-to-parallel converting LED drivers HEF4894B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 10 — 23 November 2021 © Nexperia B.V. 2021. All rights reserved 10 / 15 HEF4894B Nexperia 12-stage shift-and-store register LED driver 12. Package outline SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1 D E A X c y HE v M A Z 20 11 Q A2 A (A 3 ) A1 pin 1 index θ Lp L 1 10 e bp detail X w M 0 5 10 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y mm 2.65 0.3 0.1 2.45 2.25 0.25 0.49 0.36 0.32 0.23 13.0 12.6 7.6 7.4 1.27 10.65 10.00 1.4 1.1 0.4 1.1 1.0 0.25 0.25 0.1 0.9 0.4 inches 0.1 0.012 0.096 0.004 0.089 0.01 0.019 0.013 0.014 0.009 0.51 0.49 0.30 0.29 0.05 0.419 0.043 0.055 0.394 0.016 0.043 0.039 0.01 0.01 0.004 0.035 0.016 Z (1) θ o 8 o 0 Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. REFERENCES OUTLINE VERSION IEC JEDEC SOT163-1 075E04 MS-013 JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 Fig. 12. Package outline SOT163-1 (SO20) HEF4894B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 10 — 23 November 2021 © Nexperia B.V. 2021. All rights reserved 11 / 15 HEF4894B Nexperia 12-stage shift-and-store register LED driver TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm D SOT360-1 E A X c HE y v M A Z 11 20 Q A2 pin 1 index (A 3 ) A1 A θ Lp 1 L 10 detail X w M bp e 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (2) e HE L Lp Q v w y Z (1) θ mm 1.1 0.15 0.05 0.95 0.80 0.25 0.30 0.19 0.2 0.1 6.6 6.4 4.5 4.3 0.65 6.6 6.2 1 0.75 0.50 0.4 0.3 0.2 0.13 0.1 0.5 0.2 8o 0o Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT360-1 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 MO-153 Fig. 13. Package outline SOT360-1 (TSSOP20) HEF4894B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 10 — 23 November 2021 © Nexperia B.V. 2021. All rights reserved 12 / 15 HEF4894B Nexperia 12-stage shift-and-store register LED driver 13. Abbreviations Table 11. Abbreviations Acronym Description CMOS Complementary Metal-Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model LED Light Emitting Diode MM Machine Model 14. Revision history Table 12. Revision history Document ID Release date Data sheet status Change notice Supersedes HEF4894B v.10 20211123 Product data sheet - HEF4894B v.9 Modifications: • • • • The format of this data sheet has been redesigned to comply with the identity guidelines of Nexperia. Legal texts have been adapted to the new company name where appropriate. Section 2 updated. Section 7: Derating values for Ptot total power dissipation updated. HEF4894B v.9 20160418 Modifications: • HEF4894B v.8 20111122 Modifications: • • HEF4894B v.7 20100813 Product data sheet - HEF4894B v.6 HEF4894B v.6 20100408 Product data sheet - HEF4894B v.5 HEF4894B v.5 20091222 Product data sheet - HEF4894B v.4 HEF4894B v.4 20080827 Product data sheet - HEF4894B_CNV v.3 HEF4894B_CNV v.3 19950101 Product specification - HEF4894B_CNV v.2 HEF4894B_CNV v.2 19950101 Product specification - - HEF4894B Product data sheet Product data sheet - HEF4894B v.8 Type number HEF4894BP (SOT146-1) removed. Product data sheet - HEF4894B v.7 Section Applications removed Table 6: IOH minimum values changed to maximum All information provided in this document is subject to legal disclaimers. Rev. 10 — 23 November 2021 © Nexperia B.V. 2021. All rights reserved 13 / 15 HEF4894B Nexperia 12-stage shift-and-store register LED driver 15. Legal information injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Data sheet status Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Document status [1][2] Product status [3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] [2] [3] Please consult the most recently issued document before initiating or completing a design. The term 'short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the internet at https://www.nexperia.com. Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet. Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. Right to make changes — Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — Nexperia products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an Nexperia product can reasonably be expected to result in personal HEF4894B Product data sheet Applications — Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of Nexperia products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products — Unless this data sheet expressly states that this specific Nexperia product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. Nexperia accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without Nexperia’s warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond Nexperia’s specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies Nexperia for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond Nexperia’s standard warranty and Nexperia’s product specifications. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. All information provided in this document is subject to legal disclaimers. Rev. 10 — 23 November 2021 © Nexperia B.V. 2021. All rights reserved 14 / 15 HEF4894B Nexperia 12-stage shift-and-store register LED driver Contents 1. General description...................................................... 1 2. Features and benefits.................................................. 1 3. Ordering information....................................................1 4. Functional diagram.......................................................2 5. Pinning information......................................................3 5.1. Pinning.........................................................................3 5.2. Pin description............................................................. 4 6. Functional description................................................. 4 7. Limiting values............................................................. 5 8. Recommended operating conditions..........................5 9. Static characteristics....................................................6 10. Dynamic characteristics............................................ 7 10.1. Waveforms and test circuit........................................ 8 11. Application information............................................10 12. Package outline........................................................ 11 13. Abbreviations............................................................ 13 14. Revision history........................................................13 15. Legal information......................................................14 © Nexperia B.V. 2021. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 23 November 2021 HEF4894B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 10 — 23 November 2021 © Nexperia B.V. 2021. All rights reserved 15 / 15