MC7447AVU600NB

Freescale Semiconductor Technical Data Document Number: MPC7447AECS01AD Rev. 3, 09/2005 MPC7447A Hardware Specification Addendum for the MC7447AxxnnnnNx Series This document describes part-number-specific changes to recommended operating conditions and revised electrical specifications, as applicable, from those described in the general MPC7447A RISC Microprocessor Hardware Specifications. The MPC7447A is a PowerPC™ microprocessor. Specifications provided in this document supersede those in the MPC7447A RISC Microprocessor Hardware Specifications, Rev. 3 or later, for the part numbers listed in Table 1 only. Specifications not addressed herein are unchanged. Note that headings and table numbers in this document are not consecutively numbered. They are intended to correspond to the heading or table affected in the general hardware specification. Part numbers addressed in this document are listed in Table 1. © Freescale Semiconductor, Inc., 2005. All rights reserved. Freescale Part Numbers Affected: MC7447AHX600NB MC7447AHX733NB MC7447AHX867NB MC7447AHX1000NB MC7447AHX1167NB MC7447AVS600NB MC7447AVS733NB MC7447AVS867NB MC7447AVS1000NB MC7447AVS1167NB MC7447AVU600NB MC7447AVU733NB MC7447AVU867NB MC7447AVU1000NB MC7447AVU1167NB General Parameters Table 1. Part Numbers Addressed by this Data Sheet Operating Conditions Freescale Part Number CPU Frequency (MHz) MC7447AHX600NB 600 MC7447AHX733NB 733 MC7447AHX867NB 867 MC7447AHX1000NB 1000 MC7447AHX1167NB 1167 MC7447AVS600NB 600 MC7447AVS733NB 733 MC7447AVS867NB 867 MC7447AVS1000NB 1000 MC7447AVS1167NB 1167 MC7447AVU600NB 600 MC7447AVU733NB 733 MC7447AVU867NB 867 MC7447AVU1000NB 1000 MC7447AVU1167NB 1167 1 VDD Tj (°C) Significant Differences from Hardware Specification 1.1 V ± 50 mV 0 to 105 Modified core frequency and voltage to reduce power consumption. General Parameters Core power supply 1.1 V ± 50 mV DC (nominal), or 1.0 V ± 50 mV DC (derated) 1.1 DC Electrical Characteristics Table 2 provides the recommended operating conditions for the MPC7447A part numbers described herein. NOTE Table 2 describes the nominal operating conditions of the device. For information regarding the operation of the device at supported derated core voltage conditions, see Section 1.3, “Voltage and Frequency Derating.” MPC7447A Hardware Specification Addendum for the MC7447AxxnnnnNx Series, Rev. 3 2 Freescale Semiconductor General Parameters Table 2. Recommended Operating Conditions 1 Symbol Recommended Value Unit Notes Core supply voltage VDD 1.1 V ± 50 mV V 3 PLL supply voltage AVDD 1.1 V ± 50 mV V 2, 3 Characteristic Note: 1. These are the recommended and tested operating conditions. In addition, these devices also support voltage derating; see Section 1.3, “Voltage and Frequency Derating.” Proper device operation outside of these conditions and those specified in Section 1.3 is not guaranteed. 2. This voltage is the input to the filter discussed in MPC7447A RISC Microprocessor Hardware Specifications, Section 9.2, “PLL Power Supply Filtering,” and not necessarily the voltage at the AVDD pin, which may be reduced from VDD by the filter. 3. VDD and AVDD may be reduced in order to reduce power consumption if further maximum core frequency constraints are observed. See Section 1.3, “Voltage and Frequency Derating,” for specific information. Table 3 provides the power consumption for the MPC7447A part numbers described herein. For information regarding power consumption when dynamic frequency switching (DFS) is enabled, see the MPC7447A RISC Microprocessor Hardware Specifications. NOTE The power consumption information in this table applies when the device is operated at the nominal core voltage indicated in Table 2. For power consumption at derated core voltage conditions, see Section 1.3, “Voltage and Frequency Derating.” Table 3. Power Consumption for MPC7447A Processor (CPU) Frequency 600 MHz 733 MHz 867 MHz 1000 MHz 1167 MHz Unit Notes Full-Power Mode Typical 6.0 6.8 7.8 8.0 9.2 W 1, 2 Maximum 8.2 9.5 10.3 11.5 13.0 W 1, 3 1.3 1.3 W 1, 2 1.3 1.3 W 1, 2 Nap Mode Typical 1.3 1.3 1.3 Sleep Mode Typical 1.3 1.3 1.3 MPC7447A Hardware Specification Addendum for the MC7447AxxnnnnNx Series, Rev. 3 Freescale Semiconductor 3 General Parameters Table 3. Power Consumption for MPC7447A (continued) Processor (CPU) Frequency 600 MHz 733 MHz 867 MHz 1000 MHz Unit Notes W 1, 2 1167 MHz Deep Sleep Mode (PLL Disabled) Typical 1.2 1.2 1.2 1.2 1.2 Notes: 1. These values apply for all valid processor buses. The values do not include I/O supply power (OVDD) or PLL supply power (AVDD). OVDD power is system dependent but is typically < 5% of VDD power. Worst case power consumption for AVDD < 3 mW. 2. Typical power is an average value measured at the nominal recommended VDD (see Table 2) and 65°C while running the Dhrystone 2.1 benchmark and achieving 2.3 Dhrystone MIPs/MHz. 3. Maximum power is the average measured at nominal VDD and maximum operating junction temperature (see Table 2) while running an entirely cache-resident, contrived sequence of instructions which keep all the execution units maximally busy. 4. Doze mode is not a user-definable state; it is an intermediate state between full-power and either nap or sleep mode. As a result, power consumption for this mode is not tested. 1.2 AC Electrical Characteristics Table 4 provides the clock AC timing specifications for the MPC7447A part numbers described herein. NOTE The core frequency information in this table applies when the device is operated at the nominal core voltage indicated in Table 2. For core frequency specifications at derated core voltage conditions, see Section 1.3, “Voltage and Frequency Derating.” Table 4. Clock AC Timing Specifications At recommended operating conditions. See Table 2. Maximum Processor Core Frequency Characteristic Symbol 600 MHz 733 MHz 867 MHz 1000 MHz 1167 MHz Unit Notes Min Max Min Max Min Max Min Max Min Max 600 500 733 500 867 500 1000 500 1167 MHz 1, 2, 3 Processor frequency fcore 500 VCO frequency fVCO 1000 1200 1000 1466 1000 1733 1000 2000 1000 2333 MHz 1, 3 Notes: 1. Caution: The SYSCLK frequency and PLL_CFG[0:4] settings must be chosen such that the resulting SYSCLK (bus) frequency, CPU (core) frequency, and PLL (VCO) frequency do not exceed their respective maximum or minimum operating frequencies. Refer to the PLL_CFG[0:4] signal description in MPC7447A RISC Microprocessor Hardware Specifications, Section 9.1, “PLL Configuration,” for valid PLL_CFG[0:4] settings. 2. Caution: If dynamic frequency switching (DFS) is enabled, the SYSCLK frequency and PLL_CFG[0:4] settings must be chosen such that the resulting processor frequency is greater than or equal to the minimum core frequency. 3. Caution: These values specify the maximum processor core and VCO frequencies when the device is operated at the nominal core voltage. If operating the device at the derated core voltage, the processor core and VCO frequencies must be reduced. See Section 1.3, “Voltage and Frequency Derating,” for more information. MPC7447A Hardware Specification Addendum for the MC7447AxxnnnnNx Series, Rev. 3 4 Freescale Semiconductor Ordering Information 1.2.1 Processor Bus AC Specifications Devices described by this hardware specification addendum conform to the processor bus AC timing specifications provided in the MPC7447A RISC Microprocessor Hardware Specifications. Please refer to that document for this information. 1.3 Voltage and Frequency Derating To reduce the power consumption of the device, these devices support voltage and frequency derating whereby the core voltage (VDD) may be reduced if the reduced maximum processor core frequency requirements are observed. The supported derated core voltage, resulting maximum processor core frequency (fcore), and power consumption are provided in Table 5. Only those parameters in Table 5 are affected; all other parameter specifications are unaffected. Table 5. Supported Voltage, Core Frequency, and Power Consumption Derating 2 Maximum Rated Core Frequency (Device Marking) Supported Derated Core Voltage (VDD) Maximum Derated Core Frequency (fcore) 600 1.0 V ±50mV Full-Power Mode Power Consumption Maximum Typical 533 5.9 W 4.2 W 733 533 5.9 W 4.2 W 867 667 6.9 W 4.9 W 1000 800 8.0 W 5.6 W 1167 1000 9.4 W 6.6 W Ordering Information 2.1 Part Numbers Addressed by This Specification Table 6 provides the ordering information for the MPC7447A parts described in this document. Table 6. Part Marking Nomenclature MC 7447A xx nnnn N x Product Code Part Identifier Package Processor Frequency 1 Application Modifier Revision Level MC 7447A HX = HCTE BGA VS = RoHS LGA VU = RoHS BGA 600 733 867 1000 1167 N: 1.1 V ± 50 mV 0 to 105°C B:1.1:PVR = 8003 0101 Notes: 1. Processor core frequencies supported by parts addressed by this specification only. Parts addressed by other specifications may support other maximum core frequencies. MPC7447A Hardware Specification Addendum for the MC7447AxxnnnnNx Series, Rev. 3 Freescale Semiconductor 5 Document Revision History 2.2 Part Marking Parts are marked as the example shown in Figure 1. MC7447A xxnnnnNB AWLYYWW MMMMMM YWWLAZ 7447A BGA/LGA Notes: AWLYYWW is the test code. MMMMMM is the M00 (mask) number. YWWLAZ is the assembly traceability code. Figure 1. Part Marking for BGA Device 3 Document Revision History Table 7 provides a revision history for this part number specification. Table 7. . Document Revision History Rev. No. Date 3 09/23/05 Added RoHS BGA parts: • MC7447AVU600NB • MC7447AVU733NB • MC7447AVU867NB • MC7447AVU1000NB • MC7447AVU1167NB 2 01/24/05 Added LGA parts: • MC7447AVS600NB • MC7447AVS733NB • MC7447AVS867NB • MC7447AVS1000NB • MC7447AVS1167NB 1 09/20/04 Changed title wording from ‘Part Number Specification’ to ‘Hardware Specification Addendum’; adopted new Document ID numbering scheme. 09/09/04 Added information on derating. 08/27/04 Added 600-, 733- and 867-MHz speed bins. 0 Substantive Change(s) Initial release. MPC7447A Hardware Specification Addendum for the MC7447AxxnnnnNx Series, Rev. 3 6 Freescale Semiconductor Document Revision History THIS PAGE INTENTIONALLY LEFT BLANK MPC7447A Hardware Specification Addendum for the MC7447AxxnnnnNx Series, Rev. 3 Freescale Semiconductor 7 How to Reach Us: Information in this document is provided solely to enable system and software implementers to use USA/Europe/Locations Not Listed: Freescale Semiconductor Literature Distribution Center P.O. Box 5405, Denver, Colorado 80217 1-480-768-2130 (800) 521-6274 Freescale Semiconductor products. There are no express or implied copyright licenses granted Japan: Freescale Semiconductor Japan Ltd. Technical Information Center 3-20-1, Minami-Azabu, Minato-ku Tokyo 106-8573, Japan 81-3-3440-3569 Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. 2 Dai King Street Tai Po Industrial Estate Tai Po, N.T. Hong Kong 852-26668334 Home Page: www.freescale.com hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Learn More: For more information about Freescale Semiconductor products, please visit www.freescale.com Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. The described product is a PowerPC microprocessor. The PowerPC name is a trademark of IBM Corp. and used under license. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2005. MPC7447AECS01AD Rev. 3 09/2005