MPC17511EP

Freescale Semiconductor, Inc. Freescale Semiconductor, Inc... POWER ICs MPC17511 FACT SHEET 17511 0.46 Ω (TYP) H-BRIDGE MOTOR DRIVER IC The 17511 is a monolithic H-Bridge that is ideal in portable electronic applications to control various micro DC-motors found in Single Lens Reflex Cameras and Optical Disc Drives (MO, DVD, and CD). APPLICATIONS • Portable Electronics • Single Lens Camera • Optical Disc Drive (MO, DVD, and CD) The 17511 is a 6.8 V H-Bridge motor driver with enable and tri-state bridge control and an additional output for controlling an external MOSFET via a parallel MCU interface (3.0 V and 5.0 V compatible logic). The IC can drive various types of micro motors with low loss via parallel drive. The part uses very efficient drivers designed for PWM control frequency up to 200 kHz for highspeed drive and independent input/output circuitry. The 17511 has a low “ON” resistance of 0.6 Ω (max). The output devices use an integrated charge pump and level shifter for gate drive voltages, with integrated shoot through current protection circuit and undervoltage circuit detector. The bridge operates in four output control modes: Forward, Reverse, Brake, and Tri-state (Open). CUSTOMER BENEFITS • Easy MCU interfacing and control of a single H-Bridge Simplified Application Diagram 5.0 V 5.0 V 5.0 V 17511 VDD MCU C1L VDD C1H C2L C2H CRES VM TSWITCH OUTA External MOSFET Drive MOTOR EN IN1 IN2 IN3 OUTB PGND/LGND • Undervoltage detection to prevent erratic operation • High PWM rate for enhanced motor control • Output protected H-Bridge operation to 6.8 V @ 1.0 A cont. PWM to 200 kHz • Low profile package for portable designs • Integral charge pump for a simpler system • TSWITCH output for driving an external MOSFET • Low quiescent current • Reduced design time Performance Outputs Output Current Motor Operating Voltage Logic Operating Voltage Input PWM Operating Temp For More Information On This Product, Go to: www.freescale.com Typical Values 1 ch 1.0 A (DC), 3.0 A (Peak) 2.0 V – 6.8 V 2.7 V – 5.7 V 200 kHz -20°C ≤ TA ≤ 65°C H-BRIDGE ANALOG PRODUCTS Freescale Semiconductor, Inc. FEATURES • Low RDS(ON) 0.46 Ω (typ) • Output current 1.0 A (DC), 3.0 A (peak) • Shoot-through current protection circuit • PWM control input frequency 200 kHz • External MOSFET control circuit • Charge pump circuit Freescale Semiconductor, Inc... • Additional devices available for comparison in Analog Selector Guide SG1002/D Protection Detect Limiting Shut Down Undervoltage Ordering Information Ship Method Motorola Part Number 16 VMFP Rail T/R **17511EV **17511EVEL 24 QFN Rail T/R **17511EP **17511EPR2 Package MPC17511/D Data Sheet Order Number Contact Sales for Evaluation Kit Availability **Prefix Index: PPC = Eng Samples; XPC = In Qual; MPC = Production QUESTIONS • Are you working with portable electronic battery powered applications? • Do you need to control a micro brush DC-motor in a 3.0 V or 5.0 V logic system? • Are you designing a brush DC-motor controller for motors up 3.0 A (peak) and 6.8 V DC? • Do you need to drive a motor both forward and reverse? How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217 1-800-521-6274 or 480-768-2130 JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, 3–20–1, Minami–Azabu. Minato–ku, Tokyo 106–8573 Japan 81–3–3440–3569 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong 852–26668334 HOME PAGE: http://motorola.com/semiconductors MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. © Motorola, Inc. 2003 MPC17511FS/D Rev. 1 For More Information On This Product, Go to: www.freescale.com