74F656A
Octal buffer/driver with parity; non-inverting; 3-state
Rev. 6 — 14 December 2011
Product data sheet
1. General description
The 74F656A is an octal buffer and line driver with parity generation/checking. The
74F656A can be used as memory address driver, clock driver and bus-oriented
transmitter/receiver. The inclusion of parity generation/checking improves PCB density.
2. Features and benefits
Combines 74F244 and 74F280A functions in one device
High impedance NPN base inputs for reduced input current (40 A in HIGH and LOW
states)
IIL = 20 A compared to 600 A in FAST family specification
For applications with high output drive and light bus loading
Non-inverting
3-state output sink capability IOL = 64 mA and source IOH = 15 mA
Inputs and outputs on separate sides simplifies board layout
Combined functions reduce part count and enhance system performance
Industrial temperature range available (40 C to +85 C)
3. Ordering information
Table 1.
Ordering information
Type number
Package
Temperature range
Name
Description
Version
N74F656AD
0 C to 70 C
SO24
SOT137-1
I74F656AD
40 C to +85 C
plastic small outline package; 24 leads;
body width 7.5 mm
74F656A
NXP Semiconductors
Octal buffer/driver with parity; non-inverting; 3-state
4. Functional diagram
2K
3
3
1
2
23
4
5
6
7
8
9
10
11
D0
D1
D2
D3
D4
D5
D6
D7
ΣE
21
19
18
17
16
15
14
[EVEN]
21
3, 5, 6, 7, 8,
9, 10, 11, 12
[ODD]
22
ΣO
22
≥1
4
20
EN4
23
Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7
20
3, 5, 6, 7, 8,
9, 10, 11, 12
1
2
PI
OE0
OE1
OE2
P3
13 001aal255
4
Z5
5
Z6
19
6
Z7
18
7
Z8
17
8
Z9
16
9
Z10
15
10
Z11
14
11
Z12
13
001aal256
Fig 1.
Logic symbol
74F656A
Product data sheet
Fig 2.
IEC logic symbol
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 14 December 2011
© NXP B.V. 2011. All rights reserved.
2 of 14
74F656A
NXP Semiconductors
Octal buffer/driver with parity; non-inverting; 3-state
PI
D0
D1
D2
D3
D4
D5
D6
D7
OE0
OE1
OE2
Fig 3.
3
21
ΣE
22
ΣO
4
20
5
19
6
18
7
17
8
16
9
15
10
14
11
13
Q0
Q1
Q2
Q3
Q4
Q5
Q6
Q7
1
2
23
001aal253
Logic diagram
74F656A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 14 December 2011
© NXP B.V. 2011. All rights reserved.
3 of 14
74F656A
NXP Semiconductors
Octal buffer/driver with parity; non-inverting; 3-state
5. Pinning information
5.1 Pinning
74F656A
OE0
1
24 VCC
OE1
2
23 OE2
PI
3
22 ΣO
D0
4
21 ΣE
D1
5
20 Q0
D2
6
19 Q1
D3
7
18 Q2
D4
8
17 Q3
D5
9
16 Q4
D6 10
15 Q5
D7 11
14 Q6
GND 12
13 Q7
001aal254
Fig 4.
Pin configuration
5.2 Pin description
Table 2.
Pin description
Symbol
Pin
Description
Unit load
HIGH/LOW
Load value[1]
HIGH/LOW
OE0
1
output enable input (active LOW)
1.0/0.033
20 A/20 A
OE1
2
output enable input (active LOW)
1.0/0.033
20 A/20 A
PI
3
parity input
1.0/0.033
20 A/20 A
D0 to D7
4, 5, 6, 7, 8, 9, 10, 11
data input
2.0/0.066
40 A/40 A
GND
12
ground (0 V)
Q0 to Q7
20, 19, 18, 17, 16, 15, 14, 13
data output
750/106.7
15 mA/64 mA
E
21
even parity output
750/106.7
15 mA/64 mA
O
22
odd parity output
750/106.7
15 mA/64 mA
OE2
23
output enable input (active LOW)
1.0/0.033
20 A/20 A
VCC
24
supply voltage
[1]
One FAST Unit Load (UL) is defined as 20 A in HIGH state, 0.6 A in LOW state.
74F656A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 14 December 2011
© NXP B.V. 2011. All rights reserved.
4 of 14
74F656A
NXP Semiconductors
Octal buffer/driver with parity; non-inverting; 3-state
6. Functional description
6.1 Function table
Table 3.
Function selection[1]
Input
Output
OE0
OE1
OE2
Dn
L
L
L
L
L
L
L
L
H
H
H
X
X
X
Z
X
H
X
X
Z
X
X
H
X
Z
[1]
Status
Qn
transparent
disabled
H = HIGH voltage level;
L = LOW voltage level;
X = don’t care;
Z = high-impedance OFF-state.
Table 4.
Function parity outputs[1]
Inputs
State
Parity output
E
O
Even number of inputs
(0, 2, 4, 6, 8)
H
H
L
Odd number of inputs
(1, 3, 5, 7, 9)
H
L
H
Any OEn
H
Z
Z
[1]
H = HIGH voltage level;
L = LOW voltage level;
Z = high-impedance OFF-state.
74F656A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 14 December 2011
© NXP B.V. 2011. All rights reserved.
5 of 14
74F656A
NXP Semiconductors
Octal buffer/driver with parity; non-inverting; 3-state
7. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
VCC
supply voltage
Conditions
+7.0
V
0.5
+7.0
V
[1]
0.5
VCC
V
30
+5
mA
-
128
mA
commercial
0
70
C
industrial
40
+85
C
65
+150
C
input voltage
output voltage
output in HIGH-state
IIK
input clamping current
VI < 0 V
IO
output current
output in LOW-state
[2]
in free-air
storage temperature
Tstg
Unit
0.5
VO
ambient temperature
Max
[1]
VI
Tamb
Min
[1]
The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2]
The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150 C.
8. Recommended operating conditions
Table 6.
Recommended operating conditions
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VCC
supply voltage
4.5
5.0
5.5
V
VIH
HIGH-level input voltage
2.0
-
-
V
VIL
LOW-level input voltage
-
-
0.8
V
IIK
input clamping current
-
-
18
mA
IOH
HIGH-level output current
15
-
-
mA
IOL
LOW-level output current
-
-
64
mA
9. Static characteristics
Table 7.
Static characteristics
Symbol Parameter
25 C
Conditions
Min
VIK
input clamping voltage
VCC = 4.5 V; IIK = 18 mA
VOH
HIGH-level output
voltage
VCC = 4.5 V; VIL = 0.8 V; VIH = 2.0 V
Typ[1]
1.2 0.73
40 C to +85 C Unit
Max
Min
Max
-
1.2
-
V
IOH = 3 mA
VCC = 10 %
-
-
-
2.4
-
V
VCC = 5 %
-
3.3
-
2.7
-
V
-
-
-
2.0
-
V
IOH = 15 mA
VCC = 10 %
74F656A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 14 December 2011
© NXP B.V. 2011. All rights reserved.
6 of 14
74F656A
NXP Semiconductors
Octal buffer/driver with parity; non-inverting; 3-state
Table 7.
Static characteristics …continued
Symbol Parameter
25 C
Conditions
40 C to +85 C Unit
Min Typ[1] Max
VOL
LOW-level output
voltage
Min
Max
VCC = 4.5 V; VIL = 0.8 V; VIH = 2.0 V
IOL = 64 mA
VCC = 10 %
-
-
-
-
0.55
V
VCC = 5 %
-
0.42
-
-
0.55
V
VCC = 0 V; VI = 7.0 V
-
-
-
-
100
A
pin Dn
-
-
-
-
40
A
pin PI, OEn
-
-
-
-
20
A
pin Dn
-
-
-
-
80
A
pin PI, OEn
-
-
-
-
40
A
pin Dn
-
-
-
-
40
A
pin PI, OEn
-
-
-
-
20
A
-
-
-
-
50
A
-
-
-
-
50
A
-
-
-
100
225
mA
outputs HIGH-state
-
50
-
-
80
mA
outputs LOW-state
-
78
-
-
110
mA
outputs OFF-state
-
83
-
-
90
mA
II
input leakage current
IIH
HIGH-level input current VCC = 5.5 V; VI = 2.7 V; commercial
VCC = 5.5 V; VI = 2.7 V; industrial
LOW-level input current
IIL
VCC = 5.5 V; VI = 0.5 V
OFF-state output current VCC = 5.5 V
IOZ
VO = 2.7 V
VO = 0.5 V
[2]
IO
output current
VCC = 5.5 V
ICC
supply current
VCC = 5.5 V; VI = GND or VCC
[1]
All typical values are measured at VCC = 5 V.
[2]
Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
10. Dynamic characteristics
Table 8.
Dynamic characteristics
GND = 0 V; for test circuit, see Figure 7.
Symbol Parameter
tPLH
tPHL
tPZH
LOW to HIGH
propagation delay
HIGH to LOW
propagation delay
OFF-state to HIGH
propagation delay
74F656A
Product data sheet
25 C;
VCC = 5.0 V
Conditions
0 C to 70 C;
40 C to +85 C; Unit
VCC = 5.0 V 0.5 V VCC = 5.0 V 0.5 V
Min
Typ Max
Min
Max
Min
Max
Dn to Qn;
see Figure 5
2.0
4.0
6.5
2.0
7.0
2.0
8.0
ns
Dn to E, O; see
Figure 5
5.5
10.0 13.0
5.5
14.0
4.5
16.5
ns
Dn to Qn;
see Figure 5
2.5
5.5
7.0
2.5
7.5
2.5
9.0
ns
Dn to E, O; see
Figure 5
5.5
11.0 14.5
5.5
16.5
5.5
18.0
ns
OEn to Qn;
see Figure 6
3.5
7.0
3.5
11.5
3.0
13.0
ns
10.5
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 14 December 2011
© NXP B.V. 2011. All rights reserved.
7 of 14
74F656A
NXP Semiconductors
Octal buffer/driver with parity; non-inverting; 3-state
Table 8.
Dynamic characteristics …continued
GND = 0 V; for test circuit, see Figure 7.
Symbol Parameter
25 C;
VCC = 5.0 V
Conditions
0 C to 70 C;
40 C to +85 C; Unit
VCC = 5.0 V 0.5 V VCC = 5.0 V 0.5 V
Min
Typ Max
Min
Max
Min
Max
tPZL
OFF-state to LOW
propagation delay
OEn to Qn;
see Figure 6
4.0
8.0
11.0
4.5
12.0
4.0
13.5
ns
tPHZ
HIGH to OFF-state
propagation delay
OEn to Qn;
see Figure 6
1.5
4.5
8.0
1.5
9.0
1.5
10.0
ns
tPLZ
LOW to OFF-state
propagation delay
OEn to Qn;
see Figure 6
2.0
5.0
8.0
2.0
9.0
1.5
10.0
ns
11. Waveforms
VI
Dn
VM
VM
GND
tPLH
tPHL
VOH
ΣE, ΣO, Qn
VM
VM
VOL
001aal257
VM = 1.5 V
Fig 5.
Propagation delay input Dn to output Qn, E, O
VI
OEn input
VM
GND
tPZL
tPLZ
3.5 V
output
LOW-to-OFF
OFF-to-LOW
VM
VOL + 0.3 V
VOL
tPHZ
VOH
tPZH
VOH − 0.3 V
output
HIGH-to-OFF
OFF-to-HIGH
VM
GND
outputs
enabled
outputs
disabled
outputs
enabled
001aal293
VM = 1.5 V
VOL and VOH are typical voltage output levels that occur with the output load.
Fig 6.
3-state output enable and disable times
74F656A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 14 December 2011
© NXP B.V. 2011. All rights reserved.
8 of 14
74F656A
NXP Semiconductors
Octal buffer/driver with parity; non-inverting; 3-state
VI
tW
90 %
90 %
negative
pulse
VM
0V
VCC
tf
tr
tr
tf
VI
VI
DUT
RT
VM
RL
VO
G
90 %
positive
pulse
0V
VEXT
VM
10 %
CL
RL
VM
10 %
mna616
10 %
tW
001aac221
a. Input pulse definition
b. Test circuit
Test data and VEXT levels are given in Table 9.
RL = Load resistance.
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
VEXT = Test voltage for switching times.
Fig 7.
Table 9.
Test circuit for measuring switching times
Test data
Input
Load
VEXT
VI
fI
tW
tr, tf
CL
RL
tPHL, tPLH
tPZH, tPHZ
tPZL, tPLZ
3.0 V
1 MHz
500 ns
2.5 ns
50 pF
500
open
open
7.0 V
74F656A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 14 December 2011
© NXP B.V. 2011. All rights reserved.
9 of 14
74F656A
NXP Semiconductors
Octal buffer/driver with parity; non-inverting; 3-state
12. Package outline
SO24: plastic small outline package; 24 leads; body width 7.5 mm
SOT137-1
D
E
A
X
c
HE
y
v M A
Z
13
24
Q
A2
A
(A 3)
A1
pin 1 index
θ
Lp
L
1
12
e
detail X
w M
bp
0
5
10 mm
scale
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D (1)
E (1)
e
HE
L
Lp
Q
v
w
y
mm
2.65
0.3
0.1
2.45
2.25
0.25
0.49
0.36
0.32
0.23
15.6
15.2
7.6
7.4
1.27
10.65
10.00
1.4
1.1
0.4
1.1
1.0
0.25
0.25
0.1
0.01
0.019 0.013
0.014 0.009
0.61
0.60
0.30
0.29
0.05
0.419
0.043
0.055
0.394
0.016
inches
0.1
0.012 0.096
0.004 0.089
0.043
0.039
0.01
0.01
Z
(1)
0.9
0.4
0.035
0.004
0.016
θ
8o
o
0
Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
Fig 8.
REFERENCES
OUTLINE
VERSION
IEC
JEDEC
SOT137-1
075E05
MS-013
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
99-12-27
03-02-19
Package outline SOT137-1 (SO24)
74F656A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 14 December 2011
© NXP B.V. 2011. All rights reserved.
10 of 14
74F656A
NXP Semiconductors
Octal buffer/driver with parity; non-inverting; 3-state
13. Abbreviations
Table 10.
Abbreviations
Acronym
Description
DUT
Device Under Test
ESD
ElectroStatic Discharge
HBM
Human Body Model
MM
Machine Model
PCB
Printed-Circuit Board
14. Revision history
Table 11.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
74F656A v.6
20111214
Product data sheet
-
74F656A v.5
Modifications:
•
Legal pages updated.
74F656A v.5
20100325
Product data sheet
-
74F656A v.4
74F656A v.4
20100205
Product data sheet
-
74F656A v.3
74F656A v.3
20000630
Product specification
-
74F656A v.2
74F656A v.2
19910717
Product specification
-
-
74F656A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 14 December 2011
© NXP B.V. 2011. All rights reserved.
11 of 14
74F656A
NXP Semiconductors
Octal buffer/driver with parity; non-inverting; 3-state
15. Legal information
15.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
15.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
15.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
74F656A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 14 December 2011
© NXP B.V. 2011. All rights reserved.
12 of 14
74F656A
NXP Semiconductors
Octal buffer/driver with parity; non-inverting; 3-state
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
15.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
16. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
74F656A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 14 December 2011
© NXP B.V. 2011. All rights reserved.
13 of 14
74F656A
NXP Semiconductors
Octal buffer/driver with parity; non-inverting; 3-state
17. Contents
1
2
3
4
5
5.1
5.2
6
6.1
7
8
9
10
11
12
13
14
15
15.1
15.2
15.3
15.4
16
17
General description . . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Ordering information . . . . . . . . . . . . . . . . . . . . . 1
Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
Pinning information . . . . . . . . . . . . . . . . . . . . . . 4
Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4
Functional description . . . . . . . . . . . . . . . . . . . 5
Function table . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 6
Recommended operating conditions. . . . . . . . 6
Static characteristics. . . . . . . . . . . . . . . . . . . . . 6
Dynamic characteristics . . . . . . . . . . . . . . . . . . 7
Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 11
Legal information. . . . . . . . . . . . . . . . . . . . . . . 12
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 12
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Contact information. . . . . . . . . . . . . . . . . . . . . 13
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2011.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 14 December 2011
Document identifier: 74F656A