NZ2520S_08

Crystal Clock Oscillator n Model name NZ2520SD Frequency stability of ±50 x 10–6. NEW Low Phase Noise Type NZ2520S Series n Application l For wireless LAN Pb Free n Features l Low phase noise, low voltage, low consumption current, and high stability, make this product ideal for wireless LAN. l Compact and light. Dimensions and weight: 2.5 x 2.0 mm, 0.9 mm, and 0.02 g. l Automatic mounting by taping and IR reflow (lead-free) are possible. l Lead-free. Absolute maximum rating Power supply voltage (VDD) –0.6 to +6.0 V Storage temperature range –55 to +125 °C n Specifications Item Output level Frequency range *1 Model NZ2520SD C–MOS (MHz) (°C) (×10–6) 20 ≤ F < 30 –40 to +85 ±50 4.5 10 0.1 VDD/0.9 VDD 6/6 45 to 55 15 4 Available (tristate) 30 ≤ F ≤ 40 Operating temperature range *2 Frequency Stability Current During operation +3.3 V, 25 °C (mA) consumption During standby +3.3 V, 25 °C (μA) max VOL max/VOH min Tr max/Tf max Duty Cycle min. to max. Load (CL) max Oscillation start time max Standby function Phase noise +3.3 V, 25 °C (V) (ns) (%) (pF) (ms) 5.5 Fout±1 kHz : –145 (Typ) Fout±100 kHz : –158 (Typ) *1: If you require a product with a frequency not given above, please contact us. *2: If you require a product with an operating temperature range not given above, please contact us. n List of Codes for Placing an Order List of Codes for Placing an Order Power supply voltage [VDD] (V) NSA3449E +3.3±0.33 cc30_081201_NZ2520SD_50_e Crystal Clock Oscillator n Dimensions 2.50±0.10 0.3 NEW Low Phase Noise Type NZ2520S Series n Output Waveform mm 0.9VDD 0.6 Tr Tf VOH 2.00±0.10 PAD #1 #2 Connection Standby GND OUTPUT VDD 1/2VDD 0.1VDD VOL t T Duty Cycle = t/T × 100 [%] 0V 0.9 max #3 #4 0.8±0.1 #1 #2 Reference land pattern 0.7±0.1 1.00 1.25±0.1 n Standby Function #1 Input Level H (0.7 VDD ≤ VIH ≤ VDD) or OPEN is selected. Level L (VIL ≤ 0.3 VDD) is selected. #3 Output Oscillation output ON High impedance #4 1.65±0.1 #3 1.10 0.75 1.10 Mount an approx. 0.01 μF bypass capacitor between VDD and GND (close to the product) n How to Specify an Order When ordering our products, specify them with an “Ordering Code” that consists of the following: Model name – Frequency (up to 9 digits) M – Number for specifying an order Example : When ordering a product with model name: NZ2520SD, frequency: 20 MHz, frequency stability: ±50 x 10–6, and power supply voltage: 3.3 V Ordering Code: NZ2520SD – 20.000000M – NSA3449E If you have any queries concerning our standard frequencies and numbers for specifying orders, please contact our sales representatives or visit our homepage (http://www.ndk.com/). 1.00 0.45 cc31_081201_NZ2520SD_50_e