PCF8591
8-bit A/D and D/A converter
Rev. 7 — 27 June 2013
Product data sheet
1. General description
The PCF8591 is a single-chip, single-supply low-power 8-bit CMOS data acquisition
device with four analog inputs, one analog output and a serial I2C-bus interface. Three
address pins A0, A1 and A2 are used for programming the hardware address, allowing
the use of up to eight devices connected to the I2C-bus without additional hardware.
Address, control and data to and from the device are transferred serially via the two-line
bidirectional I2C-bus.
The functions of the device include analog input multiplexing, on-chip track and hold
function, 8-bit analog-to-digital conversion and an 8-bit digital-to-analog conversion. The
maximum conversion rate is given by the maximum speed of the I2C-bus.
2. Features and benefits
Single power supply
Operating supply voltage 2.5 V to 6.0 V
Low standby current
Serial input and output via I2C-bus
I2C address selection by 3 hardware address pins
Max sampling rate given by I2C-bus speed
4 analog inputs configurable as single ended or differential inputs
Auto-incremented channel selection
Analog voltage range from VSS to VDD
On-chip track and hold circuit
8-bit successive approximation A/D conversion
Multiplying DAC with one analog output.
3. Applications
Supply monitoring
Reference setting
Analog control loops
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
4. Ordering information
Table 1.
Ordering information
Type number
Package
Name
Description
Version
PCF8591P
DIP16
plastic dual in-line package; 16 leads
(300 mil)
SOT38-4
PCF8591T
SO16
plastic small outline package; 16 leads;
body width 7.5 mm
SOT162-1
4.1 Ordering options
Table 2.
Ordering options
Product type number
Sales item (12NC)
Orderable part
number
IC
revision
Delivery form
PCF8591P
933768130112
PCF8591P,112
1
tube
PCF8591T/2
935276541512
PCF8591T/2,512
1
tube, dry pack
935276541518
PCF8591T/2,518
1
tape and reel, dry pack, 13 inch
5. Marking
Table 3.
PCF8591
Product data sheet
Marking codes
Type number
Marking code
PCF8591P
PCF8591P
PCF8591T
PCF8591T
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
© NXP B.V. 2013. All rights reserved.
2 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
6. Block diagram
SCL
SDA
A0
A1
A2
I2C BUS
INTERFACE
STATUS
REGISTER
PCF8591
DAC DATA
REGISTER
ADC DATA
REGISTER
EXT
VDD
VSS
POWER ON
RESET
CONTROL
LOGIC
OSCILLATOR
OSC
AIN0
AIN1
AIN2
AIN3
ANALOGUE
MULTIPLEXER
SAMPLE
AND
HOLD
COMPARATOR
SAMPLE
AND
HOLD
AOUT
SUCCESSIVE
APPROXIMATION
REGISTER/LOGIC
VREF
DAC
AGND
mbl821
Fig 1.
Block diagram of PCF8591
7. Pinning information
7.1 Pinning
$,1
9''
$,1
9''
$,1
$287
$,1
$287
$,1
95()
$,1
95()
$*1'
$,1
$,1
$
3&)3
$
26&
$
26&
$
6&/
$
6&/
966
6'$
966
6'$
Product data sheet
Pin configuration for PCF8591P
(DIP16)
Top view. For mechanical details, see
Figure 23 on page 22.
Fig 3.
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
(;7
DDD
Top view. For mechanical details, see
Figure 22 on page 21.
PCF8591
$*1'
$
DDD
Fig 2.
3&)7
(;7
Pin configuration for PCF8591T
(SO16)
© NXP B.V. 2013. All rights reserved.
3 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
7.2 Pin description
Table 4.
PCF8591
Product data sheet
Pin description
Symbol
Pin
Description
AIN0
1
analog inputs (A/D converter)
AIN1
2
AIN2
3
AIN3
4
A0
5
A1
6
A2
7
VSS
8
ground supply voltage
SDA
9
I2C-bus serial data input and output
SCL
10
I2C-bus serial clock input
OSC
11
oscillator input/output
EXT
12
external/internal switch for oscillator input
AGND
13
analog ground supply
VREF
14
voltage reference input
AOUT
15
analog output (D/A converter)
VDD
16
supply voltage
hardware slave address
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
© NXP B.V. 2013. All rights reserved.
4 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
8. Functional description
8.1 Addressing
Each PCF8591 device in an I2C-bus system is activated by sending a valid address to the
device. The address consists of a fixed part and a programmable part. The programmable
part must be set according to the address pins A0, A1 and A2. The address is always sent
as the first byte after the start condition in the I2C-bus protocol. The last bit of the address
byte is the read/write-bit which sets the direction of the following data transfer (see Table 5
on page 13, Figure 15 on page 13 and Figure 16 on page 13).
8.2 Control byte
The second byte sent to a PCF8591 device is stored in its control register and is required
to control the device function. The upper nibble of the control register is used for enabling
the analog output, and for programming the analog inputs as single-ended or differential
inputs. The lower nibble selects one of the analog input channels defined by the upper
nibble (see Figure 4). If the auto-increment flag is set, the channel number is incremented
automatically after each A/D conversion.
If the auto-increment mode is desired in applications where the internal oscillator is used,
the analog output enable flag must be set in the control byte (bit 6). This allows the
internal oscillator to run continuously, by this means preventing conversion errors
resulting from oscillator start-up delay. The analog output enable flag can be reset at other
times to reduce quiescent power consumption.
The selection of a non-existing input channel results in the highest available channel
number being allocated. Therefore, if the auto-increment flag is set, the next selected
channel is always channel 0. The most significant bits of both nibbles are reserved for
possible future functions and must be set to logic 0. After a Power-On Reset (POR)
condition, all bits of the control register are reset to logic 0. The D/A converter and the
oscillator are disabled for power saving. The analog output is switched to a
high-impedance state.
PCF8591
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
© NXP B.V. 2013. All rights reserved.
5 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
06%
/6%
;
;
;
;
;
;
&21752/% VAGND
[2]
VSS
-
VDD 0.8
V
250
-
+250
nA
-
100
-
k
pins VREF and AGND
Oscillator: OSC, EXT
ILI
input leakage current
-
-
250
nA
fOSC
oscillator frequency
0.75
-
1.25
MHz
[1]
The power-on reset circuit resets the I2C-bus logic when VDD is less than VPOR.
[2]
A further extension of the range is possible, if the following conditions are fulfilled: --------------------------------- 0.8 V ,
V ref + V AGND
2
V ref + V AGND
V DD – --------------------------------- 0.4 V .
2
PCF8591
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
© NXP B.V. 2013. All rights reserved.
17 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
14.2 D/A characteristics
Table 9.
D/A characteristics
VDD = 5.0 V; VSS = 0; VREF =5.0 V; VAGND = 0 V; RL = 10 k; CL = 100 pF; Tamb = 40 oC to +85 oC unless otherwise
specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
no resistive load
VSS
-
VDD
V
RL = 10 k
VSS
-
0.9 VDD
V
-
-
250
nA
-
-
50
mV
-
-
1.5
LSB
Analog output
Voa
ILO
analog output voltage
output leakage current AOUT disabled
Accuracy
Tamb = 25 oC
EO
offset error
EL
linearity error
EG
gain error
no resistive load
-
-
1
%
to 1/2 LSB full scale
ts(DAC)
DAC settling time
-
-
90
s
fc(DAC)
DAC conversion
frequency
-
-
11.1
kHz
SNRR
supply noise rejection f = 100 Hz;
ratio
VDDN = 0.1 VPP
-
40
-
dB
14.3 A/D characteristics
Table 10. A/D characteristics
VDD = 5.0 V; VSS = 0; VREF =5.0 V; VAGND = 0 V; RS = 10 k; Tamb = 40 oC to +85 oC unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Analog inputs
Via
analog input voltage
VSS
-
VDD
V
ILIA
analog input leakage
current
-
-
100
nA
Ci(a)
analog input
capacitance
-
10
-
pF
Ci(dif)
differential input capacitance
-
10
-
pF
Vi(se)
single-ended input
voltage
measuring range
VAGND
-
VREF
V
Vi(dif)
differential input
voltage
measuring range:
– V FS
-----------2
-
+V FS
-----------2
V
VFS = VREF - VAGND
EO
offset error
Tamb = 25 oC
-
-
20
mV
EL
linearity error
-
-
1.5
LSB
EG
gain error
-
-
1
%
-
-
5
%
-
60
-
dB
Accuracy
small signal;
Vi = 16 LSB
CMRR
common mode
rejection ratio
PCF8591
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
© NXP B.V. 2013. All rights reserved.
18 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
Table 10. A/D characteristics …continued
VDD = 5.0 V; VSS = 0; VREF =5.0 V; VAGND = 0 V; RS = 10 k; Tamb = 40 oC to +85 oC unless otherwise specified.
Symbol
Parameter
SNRR
Conditions
Min
Typ
Max
Unit
supply noise rejection f = 100 Hz;
ratio
VDDN = 0.1 VPP
-
40
-
dB
tconv
conversion time
-
-
90
s
fs
sampling frequency
-
-
11.1
kHz
DDD
,''
$
DDD
,''
$
&
&
&
9''9
a. internal oscillator; Tamb = +27 C
9''9
b. External oscillator
Fig 19. Operating supply current as a function of supply voltage (analog output disabled)
DDD
'$RXWSXW
LPSHGDQFH
K
K
K
K
K
KH[LQSXWFRGH
DDD
'$RXWSXW
LPSHGDQFH
$K
a. Output impedance near negative power rail;
Tamb = +27 C
%K
&K
'K
(K
)K
KH[LQSXWFRGH
))K
b. Output impedance near positive power rail; Tamb =
+27 C
Fig 20. Output impedance of analog output buffer (near power rails)
PCF8591
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
© NXP B.V. 2013. All rights reserved.
19 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
14.4 Dynamic characteristics
Table 11. Dynamic characteristics
All timing characteristics are valid within the operating supply voltage and ambient temperature
range and reference to VIL and VIH with an input voltage swing of VSS to VDD.
Symbol Parameter
I2C
Typ
Max
Unit
bus timing (see Figure 21)
fSCL
SCL clock frequency
-
-
100
kHz
tSP
pulse width of spikes that must be
suppressed by the input filter
-
-
100
ns
tBUF
bus free time between a STOP and START
condition
4.7
-
-
s
tSU;STA
set-up time for a repeated START condition
4.7
-
-
s
tHD;STA
hold time (repeated) START condition
4.0
-
-
s
tLOW
LOW period of the SCL clock
4.7
-
-
s
tHIGH
HIGH period of the SCL clock
4.0
-
-
s
tr
rise time of both SDA and SCL signals
-
-
1.0
s
tf
fall time of both SDA and SCL signals
-
-
0.3
s
tSU;DAT
data set-up time
250
-
-
s
tHD;DAT
data hold time
0
-
-
s
tVD;DAT
data valid time
-
-
3.4
s
tSU;STO
set-up time for STOP condition
4.0
-
-
s
[1]
PROTOCOL
Min
[1]
A detailed description of the I2C bus specification, with applications, is given in Ref. 11 “UM10204”.
tSU;STA
BIT 6
(A6)
BIT 7
MSB
(A7)
START
CONDITION
(S)
tLOW
tHIGH
BIT 0
LSB
(R/W)
ACKNOWLEDGE
(A)
STOP
CONDITION
(P)
1 / fSCL
SCL
tBUF
tr
tf
SDA
tHD;STA
tSU;DAT
tHD;DAT
tVD;DAT
tSU;STO
mbd820
Fig 21. I2C bus timing diagram; rise and fall times refer to VIL and VIH
PCF8591
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
© NXP B.V. 2013. All rights reserved.
20 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
15. Package outline
DIP16: plastic dual in-line package; 16 leads (300 mil)
SOT38-4
ME
seating plane
D
A2
A
A1
L
c
e
Z
w M
b1
(e 1)
b
b2
MH
9
16
pin 1 index
E
1
8
0
5
10 mm
scale
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
UNIT
A
max.
A1
min.
A2
max.
b
b1
b2
c
D (1)
E (1)
e
e1
L
ME
MH
w
Z (1)
max.
mm
4.2
0.51
3.2
1.73
1.30
0.53
0.38
1.25
0.85
0.36
0.23
19.50
18.55
6.48
6.20
2.54
7.62
3.60
3.05
8.25
7.80
10.0
8.3
0.254
0.76
inches
0.17
0.02
0.13
0.068
0.051
0.021
0.015
0.049
0.033
0.014
0.009
0.77
0.73
0.26
0.24
0.1
0.3
0.14
0.12
0.32
0.31
0.39
0.33
0.01
0.03
Note
1. Plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included.
OUTLINE
VERSION
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
95-01-14
03-02-13
SOT38-4
Fig 22. DIP16: plastic dual in-line package; 16 leads (300 mil)
PCF8591
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
© NXP B.V. 2013. All rights reserved.
21 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
SO16: plastic small outline package; 16 leads; body width 7.5 mm
SOT162-1
D
E
A
X
c
HE
y
v M A
Z
9
16
Q
A2
A
(A 3)
A1
pin 1 index
θ
Lp
L
1
8
e
detail X
w M
bp
0
5
10 mm
scale
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D (1)
E (1)
e
HE
L
Lp
Q
v
w
y
mm
2.65
0.3
0.1
2.45
2.25
0.25
0.49
0.36
0.32
0.23
10.5
10.1
7.6
7.4
1.27
10.65
10.00
1.4
1.1
0.4
1.1
1.0
0.25
0.25
0.1
0.01
0.019 0.013
0.014 0.009
0.41
0.40
0.30
0.29
0.05
0.419
0.043
0.055
0.394
0.016
inches
0.1
0.012 0.096
0.004 0.089
0.043
0.039
0.01
0.01
Z
(1)
0.9
0.4
0.035
0.004
0.016
θ
8o
o
0
Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
REFERENCES
OUTLINE
VERSION
IEC
JEDEC
SOT162-1
075E03
MS-013
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
99-12-27
03-02-19
Fig 23. SO16: plastic small outline package; 16 leads: body width 7.5 mm
PCF8591
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
© NXP B.V. 2013. All rights reserved.
22 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
16. Soldering of SMD packages
This text provides a very brief insight into a complex technology. A more in-depth account
of soldering ICs can be found in Application Note AN10365 “Surface mount reflow
soldering description”.
16.1 Introduction to soldering
Soldering is one of the most common methods through which packages are attached to
Printed Circuit Boards (PCBs), to form electrical circuits. The soldered joint provides both
the mechanical and the electrical connection. There is no single soldering method that is
ideal for all IC packages. Wave soldering is often preferred when through-hole and
Surface Mount Devices (SMDs) are mixed on one printed wiring board; however, it is not
suitable for fine pitch SMDs. Reflow soldering is ideal for the small pitches and high
densities that come with increased miniaturization.
16.2 Wave and reflow soldering
Wave soldering is a joining technology in which the joints are made by solder coming from
a standing wave of liquid solder. The wave soldering process is suitable for the following:
• Through-hole components
• Leaded or leadless SMDs, which are glued to the surface of the printed circuit board
Not all SMDs can be wave soldered. Packages with solder balls, and some leadless
packages which have solder lands underneath the body, cannot be wave soldered. Also,
leaded SMDs with leads having a pitch smaller than ~0.6 mm cannot be wave soldered,
due to an increased probability of bridging.
The reflow soldering process involves applying solder paste to a board, followed by
component placement and exposure to a temperature profile. Leaded packages,
packages with solder balls, and leadless packages are all reflow solderable.
Key characteristics in both wave and reflow soldering are:
•
•
•
•
•
•
Board specifications, including the board finish, solder masks and vias
Package footprints, including solder thieves and orientation
The moisture sensitivity level of the packages
Package placement
Inspection and repair
Lead-free soldering versus SnPb soldering
16.3 Wave soldering
Key characteristics in wave soldering are:
• Process issues, such as application of adhesive and flux, clinching of leads, board
transport, the solder wave parameters, and the time during which components are
exposed to the wave
• Solder bath specifications, including temperature and impurities
PCF8591
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
© NXP B.V. 2013. All rights reserved.
23 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
16.4 Reflow soldering
Key characteristics in reflow soldering are:
• Lead-free versus SnPb soldering; note that a lead-free reflow process usually leads to
higher minimum peak temperatures (see Figure 24) than a SnPb process, thus
reducing the process window
• Solder paste printing issues including smearing, release, and adjusting the process
window for a mix of large and small components on one board
• Reflow temperature profile; this profile includes preheat, reflow (in which the board is
heated to the peak temperature) and cooling down. It is imperative that the peak
temperature is high enough for the solder to make reliable solder joints (a solder paste
characteristic). In addition, the peak temperature must be low enough that the
packages and/or boards are not damaged. The peak temperature of the package
depends on package thickness and volume and is classified in accordance with
Table 12 and 13
Table 12.
SnPb eutectic process (from J-STD-020D)
Package thickness (mm)
Package reflow temperature (C)
Volume (mm3)
< 350
350
< 2.5
235
220
2.5
220
220
Table 13.
Lead-free process (from J-STD-020D)
Package thickness (mm)
Package reflow temperature (C)
Volume (mm3)
< 350
350 to 2000
> 2000
< 1.6
260
260
260
1.6 to 2.5
260
250
245
> 2.5
250
245
245
Moisture sensitivity precautions, as indicated on the packing, must be respected at all
times.
Studies have shown that small packages reach higher temperatures during reflow
soldering, see Figure 24.
PCF8591
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
© NXP B.V. 2013. All rights reserved.
24 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
temperature
maximum peak temperature
= MSL limit, damage level
minimum peak temperature
= minimum soldering temperature
peak
temperature
time
001aac844
MSL: Moisture Sensitivity Level
Fig 24. Temperature profiles for large and small components
For further information on temperature profiles, refer to Application Note AN10365
“Surface mount reflow soldering description”.
17. References
[1]
AN10365 — Surface mount reflow soldering description
[2]
AN10853 — ESD and EMC sensitivity of IC
[3]
IEC 60134 — Rating systems for electronic tubes and valves and analogous
semiconductor devices
[4]
IEC 61340-5 — Protection of electronic devices from electrostatic phenomena
[5]
IPC/JEDEC J-STD-020D — Moisture/Reflow Sensitivity Classification for
Nonhermetic Solid State Surface Mount Devices
[6]
JESD22-A114 — Electrostatic Discharge (ESD) Sensitivity Testing Human Body
Model (HBM)
[7]
JESD22-A115 — Electrostatic Discharge (ESD) Sensitivity Testing Machine Model
(MM)
[8]
JESD78 — IC Latch-Up Test
[9]
JESD625-A — Requirements for Handling Electrostatic-Discharge-Sensitive
(ESDS) Devices
[10] SNV-FA-01-02 — Marking Formats Integrated Circuits
[11] UM10204 — I2C-bus specification and user manual
[12] UM10569 — Store and transport requirements
PCF8591
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
© NXP B.V. 2013. All rights reserved.
25 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
18. Revision history
Table 14.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
PCF8591 v.7
20130627
Product data sheet
-
PCF8591 v.6
Modifications:
•
The format of this data sheet has been redesigned to comply with the new identity
guidelines of NXP Semiconductors.
•
Legal texts have been adapted to the new company name where appropriate.
PCF8591 v.6
20030127
Product data sheet
PCF8591 v.5
20011213
Product data sheet
-
PCF8591 v.4
PCF8591 v.4
19980702
Product data sheet
-
PCF8591 v.3
PCF8591 v.3
19970402
Product data sheet
-
PCF8591 v.2
PCF8591 v.2
19910901
Product data sheet
-
PCF8591 v.1
PCF8591 v.1
19860627
Product data sheet
-
-
PCF8591
Product data sheet
-
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
PCF8591 v.5
© NXP B.V. 2013. All rights reserved.
26 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
19. Legal information
19.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
19.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
19.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
PCF8591
Product data sheet
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
© NXP B.V. 2013. All rights reserved.
27 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
19.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
I2C-bus — logo is a trademark of NXP B.V.
20. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
PCF8591
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
© NXP B.V. 2013. All rights reserved.
28 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
21. Tables
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Table 6.
Table 7.
Table 8.
Table 9.
Table 10.
Table 11.
Table 12.
Table 13.
Table 14.
Ordering information . . . . . . . . . . . . . . . . . . . . .2
Ordering options . . . . . . . . . . . . . . . . . . . . . . . . .2
Marking codes . . . . . . . . . . . . . . . . . . . . . . . . . .2
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . .4
I2C slave address byte . . . . . . . . . . . . . . . . . . .13
R/W-bit description . . . . . . . . . . . . . . . . . . . . . .13
Limiting values . . . . . . . . . . . . . . . . . . . . . . . . .16
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . .17
D/A characteristics . . . . . . . . . . . . . . . . . . . . . .18
A/D characteristics . . . . . . . . . . . . . . . . . . . . . .18
Dynamic characteristics . . . . . . . . . . . . . . . . . .20
SnPb eutectic process (from J-STD-020D) . . .24
Lead-free process (from J-STD-020D) . . . . . .24
Revision history . . . . . . . . . . . . . . . . . . . . . . . .26
PCF8591
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
© NXP B.V. 2013. All rights reserved.
29 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
22. Figures
Fig 1.
Fig 2.
Fig 3.
Fig 4.
Fig 5.
Fig 6.
Fig 7.
Fig 8.
Fig 9.
Fig 10.
Fig 11.
Fig 12.
Fig 13.
Fig 14.
Fig 15.
Fig 16.
Fig 17.
Fig 18.
Fig 19.
Fig 20.
Fig 21.
Fig 22.
Fig 23.
Fig 24.
Block diagram of PCF8591 . . . . . . . . . . . . . . . . . .3
Pin configuration for PCF8591P (DIP16) . . . . . . . .3
Pin configuration for PCF8591T (SO16) . . . . . . . .3
Control byte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
DAC resistor divider chain . . . . . . . . . . . . . . . . . . .7
DAC data and DC conversion characteristics . . . .7
D/A conversion sequence . . . . . . . . . . . . . . . . . . .8
A/D conversion sequence . . . . . . . . . . . . . . . . . . .8
A/D conversion characteristics of single ended
inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
A/D conversion characteristics of differential
inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Bit transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Definition of START and STOP conditions. . . . . . 11
System configuration . . . . . . . . . . . . . . . . . . . . . .12
Acknowledgement on the I2C-bus . . . . . . . . . . . .12
Bus protocol for write mode, D/A conversion. . . .13
Bus protocol for read mode, A/D conversion . . . .13
Application diagram . . . . . . . . . . . . . . . . . . . . . . .14
Device protection diagram . . . . . . . . . . . . . . . . . .15
Operating supply current as a function of supply
voltage (analog output disabled) . . . . . . . . . . . . .19
Output impedance of analog output buffer
(near power rails) . . . . . . . . . . . . . . . . . . . . . . . . .19
I2C bus timing diagram; rise and fall times
refer to VIL and VIH . . . . . . . . . . . . . . . . . . . . . . . .20
DIP16: plastic dual in-line package; 16 leads
(300 mil). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
SO16: plastic small outline package; 16 leads:
body width 7.5 mm. . . . . . . . . . . . . . . . . . . . . . . .22
Temperature profiles for large and small
components . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
PCF8591
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7 — 27 June 2013
© NXP B.V. 2013. All rights reserved.
30 of 31
PCF8591
NXP Semiconductors
8-bit A/D and D/A converter
23. Contents
1
2
3
4
4.1
5
6
7
7.1
7.2
8
8.1
8.2
8.3
8.4
8.5
8.6
9
9.1
9.2
9.3
9.4
9.5
10
11
12
13
14
14.1
14.2
14.3
14.4
15
16
16.1
16.2
16.3
16.4
17
18
19
19.1
19.2
19.3
General description . . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Ordering options . . . . . . . . . . . . . . . . . . . . . . . . 2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pinning information . . . . . . . . . . . . . . . . . . . . . . 3
Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4
Functional description . . . . . . . . . . . . . . . . . . . 5
Addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Control byte . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
D/A conversion . . . . . . . . . . . . . . . . . . . . . . . . . 6
A/D conversion . . . . . . . . . . . . . . . . . . . . . . . . . 8
Reference voltage. . . . . . . . . . . . . . . . . . . . . . 10
Oscillator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Characteristics of the I2C bus. . . . . . . . . . . . . 11
Bit transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
START and STOP conditions . . . . . . . . . . . . . 11
System configuration . . . . . . . . . . . . . . . . . . . 11
Acknowledge . . . . . . . . . . . . . . . . . . . . . . . . . 12
I2C bus protocol . . . . . . . . . . . . . . . . . . . . . . . 12
Application design-in information . . . . . . . . . 14
Internal circuitry. . . . . . . . . . . . . . . . . . . . . . . . 15
Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . 16
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . 17
Static characteristics . . . . . . . . . . . . . . . . . . . . 17
D/A characteristics . . . . . . . . . . . . . . . . . . . . . 18
A/D characteristics . . . . . . . . . . . . . . . . . . . . . 18
Dynamic characteristics . . . . . . . . . . . . . . . . . 20
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 21
Soldering of SMD packages . . . . . . . . . . . . . . 23
Introduction to soldering . . . . . . . . . . . . . . . . . 23
Wave and reflow soldering . . . . . . . . . . . . . . . 23
Wave soldering . . . . . . . . . . . . . . . . . . . . . . . . 23
Reflow soldering . . . . . . . . . . . . . . . . . . . . . . . 24
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 26
Legal information. . . . . . . . . . . . . . . . . . . . . . . 27
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 27
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
19.4
20
21
22
23
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact information . . . . . . . . . . . . . . . . . . . .
Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28
28
29
30
31
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2013.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 27 June 2013
Document identifier: PCF8591