PCK2002PL

INTEGRATED CIRCUITS PCK2002PL 533 MHz PCI-X clock buffer Product data Supersedes data of 2002 Mar 15 2002 Oct 10 Philips Semiconductors Philips Semiconductors Product data 533 MHz PCI-X clock buffer PCK2002PL FEATURES • General purpose and PCI-X 1:4 clock buffer • 8-pin TSSOP 3.1 × 4.4 mm package • Same form, fit, and function as CDCV304 • See PCK2001P for 3.1 × 3.1 mm TSSOP-8 package • See PCK2001 or PCK2002 for 48-pin 1:18 buffer part • See PCK2001M ro PCK2002M for 28-pin 1:10 buffer part • See PCK2001R for 16-pin 1:6 buffer part • Operating frequency: 0 – 533 MHz • Part-to-part skew < 500 ps • Low output skew: VDD or VO < 0 Note 2 VO ≥ 0 to VDD CONDITION MIN –0.5 — –0.5 — –0.5 — –65 — MAX +4.3 –50 VDD + 0.5 ±50 VDD + 0.5 ±50 +150 850 UNIT V mA V mA V mA °C mW NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL VDD CL VI VO Tamb PARAMETER DC 3.3V supply voltage Capacitive load DC input voltage range DC output voltage range Operating ambient temperature range in free air CONDITIONS LIMITS MIN 3.0 20 0 0 –40 MAX 3.6 30 VDD VDD +85 UNIT V pF V V °C 2002 Oct 10 3 Philips Semiconductors Product data 533 MHz PCI-X clock buffer PCK2002PL DC CHARACTERISTICS LIMITS SYMBOL PARAMETER VDD VIH VIL VOH HIGH level input voltage LOW level input voltage (V) — — IOH = –1 mA IOH = –24 mA IOH = –12 mA IOL= 1 mA IOL= 24 mA IOL= 12 mA VOUT = 1 V VOUT = 1.65 V VOUT = 2.0 V VOUT = 1.65 V VI = VDD or GND VI = VDD or GND TEST CONDITIONS CONDITIONS OTHER — — — — — — — — — — — — — IO = 0 Tamb = –40 to +85 °C MIN 2.0 VSS – 0.3 VDD – 0.2 2.0 2.4 — — — –50 — 60 — — — MAX VDD + 0.3 0.8 — — — 0.2 0.8 0.55 — –150 — 150 ±5 100 V V V V V V V V mA mA mA mA µA µA UNIT 3.0 to 3.6 3.0 to 3.6 3.0 to 3.6 Output HIGH voltage 3.0 3.0 3.0 to 3.6 VOL Output LOW voltage 3.0 3.0 3.0 IO OH Output HIGH current Output HIGH current 3.3 3.0 IO OL ±II ICC Output LOW current Output LOW current Input leakage current Quiescent supply current 3.3 3.6 3.6 2002 Oct 10 4 Philips Semiconductors Product data 533 MHz PCI-X clock buffer PCK2002PL AC CHARACTERISTICS SYMBOL TH TL TH TL TR TF TPLH TPHL TSKW TDDSKW PARAMETER CLK HIGH time CLK LOW time CLK HIGH time CLK LOW time Output rise slew rate Output fall slew rate Buffer LH propagation delay Buffer HL propagation delay Bus CLK skew Device to device skew TEST CONDITIONS NOTES 66 MHz MHz 140 MHz MHz 2 3 2 3 4 4 5 5 1 1 MIN 6.0 6.0 2.9 3.0 2.15 2.5 1.8 1.8 — — LIMITS Tamb = –40 to +85 °C TYP6 — — — — 3.3 3.3 2.9 2.8 — — MAX — — — — 4.1 4.4 3.4 3.4 200 500 ns ns ns ns V/ns V/ns ns ns ps ps UNIT NOTES: 1. CLK skew is only valid for equal loading of all outputs. 2. TH is measured at 0.5 VDD as shown in Figure 2. 3. TL is measured at 0.35 VDD as shown in Figure 2. 4. TR and TF are measured as a transition through the threshold region 0.2 VDD to 0.6 VDD and 0.6 VDD to 0.2 VDD. 5. Input edge rate for these tests must be faster than 1 V/ns. 6. All typical values are at VCC = 3.3 V and Tamb = 25 °C. AC WAVEFORMS VM = 50% VDD CL = 10 pF VOL and VOH are the typical output voltage drop that occur with the output load. VDD BUF_IN INPUT VM VM TEST CIRCUIT VDD VDD VI PULSE GENERATOR D.U.T. RT 0.6 VDD VO 140 Ω tPLH 0.6 VDD VM BUF_OUT 0.2 VDD TR tPHL CL 140 Ω VM 0.2 VDD SW00813 TF Figure 3. Load circuitry for switching times SW00811 Figure 1. Load circuitry for switching times. tp th 0.5 VDD 0.4 VDD 0.35 VDD tl SW00812 Figure 2. Buffer Output clock 2002 Oct 10 5 Philips Semiconductors Product data 533 MHz PCI-X clock buffer PCK2002PL TSSOP8: plastic thin shrink small outline; 8 leads; body width 4.4 mm SOT530-1 2002 Oct 10 6 Philips Semiconductors Product data 533 MHz PCI-X clock buffer PCK2002PL REVISION HISTORY Rev Date _3 2002 Oct 10 Description Product data (9397 750 10537); third version supersedes Product data second version, 2002 Mar 15. Engineering Change Notice: 853-2243 29056 (2002 Oct 09). Modifications: Update and change to Operating Frequency values. Product data, second version Engineering Change Notice: 853-2256 27859 (date: 2002 Mar 15). _2 2002 Mar 15 2002 Oct 10 7 Philips Semiconductors Product data 533 MHz PCI-X clock buffer PCK2002PL Data sheet status Level I Data sheet status [1] Objective data Product status [2] [3] Development Definitions This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). II Preliminary data Qualification III Product data Production [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes in the products—including circuits, standard cells, and/or software—described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 © Koninklijke Philips Electronics N.V. 2002 All rights reserved. Printed in U.S.A. Date of release: 10-02 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. Document order number: 9397 750 10537 Philips Semiconductors 2002 Oct 10 8