PMST5550

DISCRETE SEMICONDUCTORS DATA SHEET dbook, halfpage M3D187 PMST5550; PMST5551 NPN high-voltage transistors Product data sheet Supersedes data of 1997 May 20 1999 Apr 29 NXP Semiconductors Product data sheet NPN high-voltage transistors FEATURES • Low current (max. 300 mA) • High voltage (max. 160 V). APPLICATIONS • Switching and amplification in high voltage applications such as telephony. DESCRIPTION handbook, halfpage PMST5550; PMST5551 PINNING PIN 1 2 3 base emitter collector DESCRIPTION 3 NPN high-voltage transistor in a SOT323 plastic package. PNP complement: PMST5401. 1 3 MARKING TYPE NUMBER PMST5550 PMST5551 Note 1. ∗ = - : Made in Hong Kong. ∗ = t : Made in Malaysia. Fig.1 Simplified outline (SOT323) and symbol. MARKING CODE(1) ∗1F ∗G3 2 1 Top view 2 MAM062 LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL VCBO PARAMETER collector-base voltage PMST5550 PMST5551 VCEO collector-emitter voltage PMST5550 PMST5551 VEBO IC ICM IBM Ptot Tstg Tj Tamb Note 1. Transistor mounted on an FR4 printed-circuit board. emitter-base voltage collector current (DC) peak collector current peak base current total power dissipation storage temperature junction temperature operating ambient temperature Tamb ≤ 25 °C; note 1 open collector open base − − − − − − − −65 − −65 140 160 6 300 600 100 200 +150 150 +150 V V V mA mA mA mW °C °C °C CONDITIONS open emitter − − 160 180 V V MIN. MAX. UNIT 1999 Apr 29 2 NXP Semiconductors Product data sheet NPN high-voltage transistors THERMAL CHARACTERISTICS SYMBOL Rth j-a Note 1. Transistor mounted on an FR4 printed-circuit board. CHARACTERISTICS Tamb = 25 °C unless otherwise specified. SYMBOL ICBO PARAMETER collector cut-off current PMST5550 collector cut-off current PMST5551 IEBO hFE emitter cut-off current DC current gain PMST5550 CONDITIONS IE = 0; VCB = 100 V PARAMETER thermal resistance from junction to ambient PMST5550; PMST5551 CONDITIONS note 1 VALUE 625 UNIT K/W MIN. − − − − − 60 60 20 80 80 30 − MAX. 100 100 50 50 50 − 250 − − 250 − 150 UNIT nA µA nA µA nA IE = 0; VCB = 100 V; Tamb = 100 °C IE = 0; VCB = 120 V IE = 0; VCB = 120 V; Tamb = 100 °C IC = 0; VEB = 4 V VCE = 5 V; (see Fig.2) I C = 1 mA IC = 10 mA IC = 50 mA; note 1 DC current gain PMST5551 VCE = 5 V; (see Fig.2) I C = 1 mA IC = 10 mA IC = 50 mA; note 1 VCEsat collector-emitter saturation voltage collector-emitter saturation voltage PMST5550 PMST5551 IC = 10 mA; IB = 1 mA IC = 50 mA; IB = 5 mA; note 1 mV − − IC = 10 mA; IB = 1 mA IC = 50 mA; IB = 5 mA; note 1 − − IE = ie = 0; VCB = 10 V; f = 1 MHz IC = ic = 0; VEB = 0.5 V; f = 1 MHz IC = 10 mA; VCE = 10 V; f = 100 MHz IC = 200 µA; VCE = 5 V; RS = 2 kΩ; f = 10 Hz to 15.7 kHz − − 100 − − 250 200 1 1.2 1 6 30 300 8 mV mV V V V pF pF MHz dB VBEsat base-emitter saturation voltage base-emitter saturation voltage PMST5550 PMST5551 Cc Ce fT F collector capacitance emitter capacitance transition frequency noise figure PMST5551 Note 1. Pulse test: tp ≤ 300 µs; δ ≤ 0.02. 1999 Apr 29 3 NXP Semiconductors Product data sheet NPN high-voltage transistors PMST5550; PMST5551 handbook, full pagewidth 160 MGD814 hFE 120 VCE = 5 V 80 40 0 10−1 1 10 102 IC mA 103 Fig.2 DC current gain; typical values. 1999 Apr 29 4 NXP Semiconductors Product data sheet NPN high-voltage transistors PACKAGE OUTLINE PMST5550; PMST5551 Plastic surface mounted package; 3 leads SOT323 D B E A X y HE vMA 3 Q A A1 c 1 e1 e bp 2 wM B Lp detail X 0 1 scale 2 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.8 A1 max 0.1 bp 0.4 0.3 c 0.25 0.10 D 2.2 1.8 E 1.35 1.15 e 1.3 e1 0.65 HE 2.2 2.0 Lp 0.45 0.15 Q 0.23 0.13 v 0.2 w 0.2 OUTLINE VERSION SOT323 REFERENCES IEC JEDEC EIAJ SC-70 EUROPEAN PROJECTION ISSUE DATE 97-02-28 1999 Apr 29 5 NXP Semiconductors Product data sheet NPN high-voltage transistors DATA SHEET STATUS DOCUMENT STATUS(1) Objective data sheet Preliminary data sheet Product data sheet Notes PRODUCT STATUS(2) Development Qualification Production PMST5550; PMST5551 DEFINITION This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification. 1. Please consult the most recently issued document before initiating or completing a design. 2. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. DISCLAIMERS General ⎯ Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes ⎯ NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use ⎯ NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications ⎯ Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values ⎯ Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions 1999 Apr 29 6 above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale ⎯ NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license ⎯ Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control ⎯ This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Quick reference data ⎯ The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. NXP Semiconductors Customer notification This data sheet was changed to reflect the new company name NXP Semiconductors. No changes were made to the content, except for the legal definitions and disclaimers. Contact information For additional information please visit: http://www.nxp.com For sales offices addresses send e-mail to: salesaddresses@nxp.com © NXP B.V. 2009 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 115002/00/04/pp7 Date of release: 1999 Apr 29 Document order number: 9397 750 05907