PXT4403

DISCRETE SEMICONDUCTORS DATA SHEET dbook, halfpage M3D109 PXT4403 PNP switching transistor Product data sheet Supersedes data of 1999 Apr 14 2004 Nov 22 NXP Semiconductors Product data sheet PNP switching transistor FEATURES • High current (max. 600 mA) • Low voltage (max. 40 V). APPLICATIONS • Switching and linear amplification. DESCRIPTION PNP switching transistor in a SOT89 plastic package. NPN complement: PXT4401. MARKING TYPE NUMBER PXT4403 Note 1. * = p: Made in Hong Kong. * = t: Made in Malaysia. * = W: Made in China. ORDERING INFORMATION PACKAGE TYPE NUMBER NAME PXT4403 SC-62 DESCRIPTION plastic surface mounted package; collector pad for good heat transfer; 3 leads *2T MARKING CODE(1) 3 2 1 PXT4403 PINNING PIN 1 2 3 emitter collector base DESCRIPTION 2 3 1 sym079 Fig.1 Simplified outline (SOT89) and symbol. VERSION SOT89 2004 Nov 22 2 NXP Semiconductors Product data sheet PNP switching transistor LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VCBO VCEO VEBO IC ICM IBM Ptot PARAMETER collector-base voltage collector-emitter voltage emitter-base voltage collector current (DC) peak collector current peak base current total power dissipation Tamb ≤ 25 °C note 1 note 2 note 3 Tstg Tj Tamb Notes 1. Device mounted on a printed-circuit board, single-sided copper, tin-plated and standard footprint. storage temperature junction temperature ambient temperature − − − −65 − −65 CONDITIONS open emitter open base open collector − − − − − − MIN. PXT4403 MAX. −40 −40 −5 −600 −800 −200 0.5 0.8 1.1 +150 150 +150 V V V UNIT mA mA mA W W W °C °C °C 2. Device mounted on a printed-circuit board, single-sided copper, tin-plated and mounting pad for collector 1 cm2. 3. Device mounted on a printed-circuit board, single-sided copper, tin-plated and mounting pad for collector 6 cm2. 1600 Ptot (mW) 1200 (1) 006aaa238 800 (2) (3) 400 0 −75 −25 25 75 125 175 Tamb (°C) (1) FR4 PCB; 6 cm2 mounting pad for collector. (2) FR4 PCB; 1 cm2 mounting pad for collector. (3) FR4 PCB; standard footprint. Fig.2 Power derating curves. 2004 Nov 22 3 NXP Semiconductors Product data sheet PNP switching transistor THERMAL CHARACTERISTICS SYMBOL Rth(j-a) PARAMETER thermal resistance from junction to ambient CONDITIONS in free air note 1 note 2 note 3 Rth(j-s) Notes 1. Device mounted on a printed-circuit board, single-sided copper, tin-plated and standard footprint. thermal resistance from junction to soldering point 250 156 113 30 VALUE PXT4403 UNIT K/W K/W K/W K/W 2. Device mounted on a printed-circuit board, single-sided copper, tin-plated and mounting pad for collector 1 cm2. 3. Device mounted on a printed-circuit board, single-sided copper, tin-plated and mounting pad for collector 6 cm2. 103 Zth (K/W) 102 006aaa235 (1) (3) (2) (4) (5) (6) (7) 10 (8) (9) (10) 1 10−5 10−4 10−3 10−2 10−1 1 10 102 tp (s) 103 Mounted on FR4 printed-circuit board; standard footprint. (1) δ = 1. (2) δ = 0.75. (3) δ = 0.5. (4) δ = 0.33. (5) δ = 0.2. (6) δ = 0.1. (7) δ = 0.05. (8) δ = 0.02. (9) δ = 0.01. (10) δ = 0. Fig.3 Transient thermal impedance as a function of pulse time; typical values. 2004 Nov 22 4 NXP Semiconductors Product data sheet PNP switching transistor PXT4403 103 Zth (K/W) (1) 006aaa236 102 (2) (3) (4) (5) (6) 10 (7) (8) (9) (10) 1 10−5 10−4 10−3 10−2 10−1 1 10 102 tp (s) 103 Mounted on FR4 printed-circuit board; mounting pad for collector 1 cm2. (1) δ = 1. (2) δ = 0.75. (3) δ = 0.5. (4) δ = 0.33. (5) δ = 0.2. (6) δ = 0.1. (7) δ = 0.05. (8) δ = 0.02. (9) δ = 0.01. (10) δ = 0. Fig.4 Transient thermal impedance as a function of pulse time; typical values. 103 Zth (K/W) 102 (1) (3) (5) (6) (2) (4) 006aaa237 10 (7) (8) (9) (10) 1 10−5 10−4 10−3 10−2 10−1 1 10 102 tp (s) 103 Mounted on FR4 printed-circuit board; mounting pad for collector 6 cm2. (1) δ = 1. (2) δ = 0.75. (3) δ = 0.5. (4) δ = 0.33. (5) δ = 0.2. (6) δ = 0.1. (7) δ = 0.05. (8) δ = 0.02. (9) δ = 0.01. (10) δ = 0. Fig.5 Transient thermal impedance as a function of pulse time; typical values. 2004 Nov 22 5 NXP Semiconductors Product data sheet PNP switching transistor CHARACTERISTICS Tamb = 25 °C unless otherwise specified. SYMBOL ICBO IEBO hFE PARAMETER collector-base cut-off current emitter-base cut-off current DC current gain CONDITIONS IE = 0 A; VCB = −40 V IC = 0 A; VEB = −5 V IC = −0.1 mA; VCE = −1 V IC = −1 mA; VCE = −1 V IC = −10 mA; VCE = −1 V IC = −150 mA; VCE = −2 V IC = −500 mA; VCE = −2 V VCEsat VBEsat Cc Ce fT ton td tr toff ts tf collector-emitter saturation voltage base-emitter saturation voltage collector capacitance emitter capacitance transition frequency IC = −150 mA; IB = −15 mA IC = −500 mA; IB = −50 mA IC = −150 mA; IB = −15 mA IC = −500 mA; IB = −50 mA IE = ie = 0 A; VCB = −10 V; f = 1 MHz IC = ic = 0 A; VEB = −500 mV; f = 1 MHz IC = −20 mA; VCE = −10 V; f = 100 MHz ICon = −150 mA; IBon = −15 mA; IBoff = 15 mA − − 30 60 100 100 20 − − − − − − 200 − − − − − − MIN. PXT4403 MAX. −50 −50 − − − 300 − −400 −750 −950 −1.3 8.5 35 − UNIT nA nA mV mV mV V pF pF MHz Switching times (between 10% and 90% levels); (see Fig.7) turn-on time delay time rise time turn-off time storage time fall time 40 15 30 350 300 50 ns ns ns ns ns ns 2004 Nov 22 6 NXP Semiconductors Product data sheet PNP switching transistor PXT4403 ndbook, full pagewidth 300 MGD812 hFE VCE = −1 V 200 100 0 −10−1 −1 −10 −102 IC mA −103 Fig.6 DC current gain; typical values. handbook, full pagewidth VBB VCC RB (probe) oscilloscope 450 Ω Vi R1 R2 RC Vo (probe) 450 Ω DUT oscilloscope MGD624 Vi = −9.5 V; T = 500 µs; tp = 10 µs; tr = tf ≤ 3 ns. R1 = 68 Ω; R2 = 325 Ω; RB = 325 Ω; RC = 160 Ω. VBB = 3.5 V; VCC = −29.5 V. Oscilloscope input impedance Zi = 50 Ω. Fig.7 Test circuit for switching times. 2004 Nov 22 7 NXP Semiconductors Product data sheet PNP switching transistor PACKAGE OUTLINE Plastic surface-mounted package; collector pad for good heat transfer; 3 leads PXT4403 SOT89 D B A bp3 E HE Lp 1 2 bp2 wM bp1 e1 e 3 c 0 2 scale 4 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 1.6 1.4 bp1 0.48 0.35 bp2 0.53 0.40 bp3 1.8 1.4 c 0.44 0.23 D 4.6 4.4 E 2.6 2.4 e 3.0 e1 1.5 HE 4.25 3.75 Lp 1.2 0.8 w 0.13 OUTLINE VERSION SOT89 REFERENCES IEC JEDEC TO-243 JEITA SC-62 EUROPEAN PROJECTION ISSUE DATE 04-08-03 06-03-16 2004 Nov 22 8 NXP Semiconductors Product data sheet PNP switching transistor DATA SHEET STATUS DOCUMENT STATUS(1) Objective data sheet Preliminary data sheet Product data sheet Notes 1. Please consult the most recently issued document before initiating or completing a design. PRODUCT STATUS(2) Development Qualification Production DEFINITION PXT4403 This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification. 2. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. DISCLAIMERS General ⎯ Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes ⎯ NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use ⎯ NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications ⎯ Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values ⎯ Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions 2004 Nov 22 9 above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale ⎯ NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license ⎯ Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control ⎯ This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Quick reference data ⎯ The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. NXP Semiconductors Customer notification This data sheet was changed to reflect the new company name NXP Semiconductors, including new legal definitions and disclaimers. No changes were made to the technical content, except for package outline drawings which were updated to the latest version. Contact information For additional information please visit: http://www.nxp.com For sales offices addresses send e-mail to: salesaddresses@nxp.com © NXP B.V. 2009 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands R75/04/pp10 Date of release: 2004 Nov 22 Document order number: 9397 750 13899