PZU3.9B1A,115

PZUxBA series Single Zener diodes Rev. 2 — 12 October 2023 Product data sheet 1. General description General-purpose Zener diodes in a SOD323 (SC-76) very small Surface-Mounted Device (SMD) plastic package. 2. Features and benefits • • • • • • • Non-repetitive peak reverse power dissipation: PZSM ≤ 40 W Total power dissipation: Ptot ≤ 320 mW Tolerance series: • B: approximately ±5 % • B1, B2, B3: approximately ±2 % Wide working voltage range: nominal 2.4 V to 36 V (E24 range) Low reverse current IR range Small plastic package suitable for surface-mounted design PZU5.1BA - 10BA: Very low dynamic impedances at low currents, very low leakage current, hard breakdown knee 3. Applications • General regulation functions 4. Quick reference data Table 1. Quick reference data Symbol Parameter Conditions VF forward voltage IF = 100 mA PZSM non-repetitive peak reverse power dissipation Ptot total power dissipation [1] [2] [3] Tamb ≤ 25 °C Min Typ Max Unit [1] - - 1.1 V [2] - - 40 W [3] - - 320 mW Pulse test: tp ≤ 300 μs; δ ≤ 0.02 tp = 100 µs; square wave; Tj = 25 °C prior to surge. Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. . PZUxBA series Nexperia Single Zener diodes 5. Pinning information Table 2. Pinning Pin Description 1 cathode 2 anode Simplified outline [1] 1 Symbol 2 A K 006aaa152 [1] The marking bar indicates the cathode 6. Ordering information Table 3. Ordering information Type number Package PZU2.4BA to PZU36BA [1] [1] Name Description Version SC-76 plastic, surface-mounted package; 2 leads; 1.3 mm pitch; 1.7 mm x 1.25 mm x 0.95 mm body SOD323 The series consists of 97 types with nominal working voltages from 2.4 V to 36 V. 7. Marking Table 4. Marking codes Type number Marking code [1] B B1 B2 B3 PZU2.4*A X8 - - - PZU2.7*A X9 XA XB PZU3.0*A XT XU PZU3.3*A XW PZU3.6*A XZ PZU3.9*A Product data sheet Marking code B B1 B2 B3 PZU10*A VA VB VC VD - PZU11*A VE VF VG VH XV - PZU12*A VK VL VM VN XX XY - PZU13*A VP VR VS VT MC MD - PZU14*A - - VU - ME MF MG - PZU15*A VV VW VX VY PZU4.3*A MM MN MP MR PZU16*A VZ X1 X2 X3 PZU4.7*A MS MT MU MV PZU18*A X4 X5 X6 X7 PZU5.1*A MW MX MY MZ PZU20*A XC XD XE XF PZU5.6*A LF LG LH LK PZU22*A XG XH XK XL PZU6.2*A LL LM LN LP PZU24*A XM XN XP XR PZU6.8*A LR LS LT LU PZU27*A XS - - - PZU7.5*A LV LW LX LY PZU30*A MH - - - PZU8.2*A LZ CR CS CT PZU33*A MK - - - PZU9.1*A CU CV CW CX PZU36*A ML - - - [1] PZUXBA_SER Type number * = B: tolerance series B, approximately ±5 % * = B1, B2, B3: tolerance series B1, B2, B3: approximately ±2 % All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 October 2023 © Nexperia B.V. 2023. All rights reserved 2 / 12 PZUxBA series Nexperia Single Zener diodes 8. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter IF forward current IZSM non-repetitive peak reverse current [1] - see: Table 8 PZSM non-repetitive peak reverse power dissipation [1] - 40 W Ptot total power dissipation [2] - 320 mW [3] - 490 mW Tj junction temperature - 150 °C Tamb ambient temperature -55 +150 °C Tstg storage temperature -65 +150 °C [1] [2] [3] Conditions Tamb ≤ 25 °C Min Max Unit - 200 mA tp = 100 μs; square wave; Tj = 25 °C prior to surge Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. 2 Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm . 9. Thermal characteristics Table 6. Thermal characteristics Symbol Parameter Conditions Rth(j-a) in free air Rth(j-sp) [1] [2] [3] thermal resistance from junction to ambient Min thermal resistance from junction to solder point Typ Max Unit [1] - - 390 K/W [2] - - 255 K/W [3] - - 55 K/W Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. 2 Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1cm . Soldering point of cathode tab. 10. Characteristics Table 7. Characteristics Symbol Parameter VF [1] PZUXBA_SER Product data sheet forward voltage Conditions Min Typ Max Unit IF = 10 mA Tamb = 25 °C [1] - - 0.9 V IF = 100 mA Tamb = 25 °C [1] - - 1.1 V Pulse test: tp ≤ 300 μs; δ ≤ 0.02 All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 October 2023 © Nexperia B.V. 2023. All rights reserved 3 / 12 PZUxBA series Nexperia Single Zener diodes Table 8. Characteristics per type Tj = 25 °C unless otherwise specified PZU Sel xBA Working voltage VZ (V) Maximum differential resistance rdif (Ω) IZ = 5 mA IZ = 0.5 mA IZ = 5 mA Reverse current IR (μA) Temperature coefficient SZ (mV/K) Diode Non-repetitive capacitance peak Cd (pF) reverse current IZSM (A) IZ = 5 mA f = 1 MHz; VR = 0 V tp = 100 μs; square wave; Tj = 25 °C ; prior to surge Min Max Max Max Max VR (V) Typ Max Max 2.4 B 2.3 2.6 1000 100 50 1 -1.6 450 8 2.7 B 2.5 2.9 1000 100 20 1 -2.0 440 8 B1 2.5 2.75 B2 2.65 2.9 B 2.80 3.20 1000 95 10 1 -2.1 425 8 B1 2.80 3.05 B2 2.95 3.20 B 3.10 3.50 1000 95 5 1 -2.4 410 8 B1 3.10 3.35 B2 3.25 3.50 B 3.40 3.80 1000 90 5 1 -2.4 390 8 B1 3.40 3.65 B2 3.55 3.80 B 3.70 4.10 1000 90 3 1 -2.5 370 8 B1 3.70 3.97 B2 3.87 4.10 B 4.01 4.48 1000 90 3 1 -2.5 350 8 B1 4.01 4.21 B2 4.15 4.34 B3 4.28 4.48 B 4.42 4.90 800 80 2 1 -1.4 325 8 B1 4.42 4.61 B2 4.55 4.75 B3 4.69 4.90 B 4.84 5.37 250 60 2 1.5 0.3 300 5.5 B1 4.84 5.04 B2 4.98 5.20 B3 5.14 5.37 3.0 3.3 3.6 3.9 4.3 4.7 5.1 PZUXBA_SER Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 October 2023 © Nexperia B.V. 2023. All rights reserved 4 / 12 PZUxBA series Nexperia Single Zener diodes Temperature coefficient SZ (mV/K) Diode Non-repetitive capacitance peak Cd (pF) reverse current IZSM (A) IZ = 5 mA f = 1 MHz; VR = 0 V tp = 100 μs; square wave; Tj = 25 °C ; prior to surge VR (V) Typ Max Max 1000 2.5 1.9 275 5.5 30 500 3 2.7 250 5.5 60 20 500 3.5 3.4 215 5.5 60 10 500 4 4.0 170 3.5 60 10 500 5 4.6 150 3.5 60 10 500 6 5.5 120 3.5 9.15 9.55 B 9.45 10.55 60 10 100 7 6.4 110 3.5 B1 9.45 9.87 B2 9.77 10.21 B3 10.11 10.55 B 10.44 11.56 60 10 100 8 7.4 108 3 B1 10.44 10.88 B2 10.76 11.22 B3 11.10 11.56 B 11.42 12.60 80 10 100 9 8.4 105 3 B1 11.42 11.90 B2 11.74 12.24 B3 12.08 12.60 PZU Sel xBA 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 Working voltage VZ (V) Maximum differential resistance rdif (Ω) IZ = 5 mA IZ = 0.5 mA IZ = 5 mA Min Max Max Max Max B 5.31 5.92 100 40 B1 5.31 5.55 B2 5.49 5.73 B3 5.67 5.92 B 5.86 6.53 80 B1 5.86 6.12 B2 6.06 6.33 B3 6.26 6.53 B 6.47 7.14 B1 6.47 6.73 B2 6.65 6.93 B3 6.86 7.14 B 7.06 7.84 B1 7.06 7.36 B2 7.28 7.60 B3 7.52 7.84 B 7.76 8.64 B1 7.76 8.10 B2 8.02 8.36 B3 8.28 8.64 B 8.56 9.55 B1 8.56 8.93 B2 8.85 9.23 B3 PZUXBA_SER Product data sheet Reverse current IR (μA) All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 October 2023 © Nexperia B.V. 2023. All rights reserved 5 / 12 PZUxBA series Nexperia Single Zener diodes PZU Sel xBA Working voltage VZ (V) Maximum differential resistance rdif (Ω) IZ = 5 mA IZ = 0.5 mA IZ = 5 mA Min Max Max Reverse current IR (μA) Temperature coefficient SZ (mV/K) Diode Non-repetitive capacitance peak Cd (pF) reverse current IZSM (A) IZ = 5 mA f = 1 MHz; VR = 0 V tp = 100 μs; square wave; Tj = 25 °C ; prior to surge Max Max VR (V) Typ Max Max 10 100 10 9.4 103 2.5 B 12.47 13.96 80 B1 12.47 13.03 B2 12.91 13.49 B3 13.37 13.96 14 B2 13.70 14.30 80 10 100 11 10.4 101 2 15 B 13.84 15.52 80 15 50 11 11.4 99 2 B1 13.84 14.46 B2 14.34 14.98 B3 14.85 15.52 B 15.37 17.09 80 20 50 12 12.4 97 1.5 B1 15.37 16.01 B2 15.85 16.51 B3 16.35 17.09 B 16.94 19.03 80 20 50 13 14.4 93 1.5 B1 16.94 17.70 B2 17.56 18.35 B3 18.21 19.03 B 18.86 21.08 100 20 50 15 16.4 88 1.5 B1 18.86 19.70 B2 19.52 20.39 B3 20.21 21.08 B 20.88 23.17 100 25 50 17 18.4 84 1.3 B1 20.88 21.77 B2 21.54 22.47 B3 22.23 23.17 B 22.93 25.57 120 30 50 19 20.4 80 1.3 B1 22.93 23.96 B2 23.72 24.78 B3 24.54 25.57 27 B 25.1 28.9 150 40 50 21 23.4 73 1 30 B 28 32 200 40 50 23 26.6 66 1 33 B 31 35 250 40 50 25 29.7 60 0.9 36 B 34 38 300 60 50 27 33.0 59 0.8 13 16 18 20 22 24 PZUXBA_SER Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 October 2023 © Nexperia B.V. 2023. All rights reserved 6 / 12 PZUxBA series Nexperia Single Zener diodes 006aab215 103 mbg781 300 PZSM (W) IF (mA) 102 200 10 100 1 10- 4 10- 3 10- 2 tp (s) 0 0.6 Tj = 25 °C (prior to surge) Fig. 1. Non-repetitive peak reverse power dissipation as a function of pulse duration; maximum values SZ (mV/K) Fig. 2. -1 mgl274 10 12 11 10 9.1 8.2 7.5 6.8 5 3.9 3.6 -2 3.3 1 Forward current as a function of forward voltage; typical values SZ (mV/K) 4.3 VF (V) Tj = 25 °C mgl273 0 0.8 6.2 5.6 5.1 0 4.7 3.0 2.4 2.7 -3 0 20 40 IZ (mA) -5 60 Tj = 25 °C to 150 °C VZ = 2.4 V to 4.3 V Fig. 3. Product data sheet 4 8 12 16 IZ (mA) 20 Tj = 25 °C to 150 °C VZ = 4.7 V to 12 V Temperature coefficient as a function of working current; typical values PZUXBA_SER 0 Fig. 4. Temperature coefficient as a function of working current; typical values All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 October 2023 © Nexperia B.V. 2023. All rights reserved 7 / 12 PZUxBA series Nexperia Single Zener diodes 006aab246 102 IZ (mA) VZ(nom) (V) = 4.7 IZ (mA) VZ(nom) (V) = 2.4 10 006aab247 102 2.7 3.0 3.6 3.3 3.9 4.3 10 5.6 6.8 6.2 1 1 10- 1 10- 1 10- 2 10- 2 10- 3 0 1 2 3 4 VZ (V) 10- 3 5 Tj = 25 °C VZ = 2.4 V to 4.3 V Fig. 5. 5.1 0 2 4 6 9.1 8.2 7.5 8 11 10 10 12 12 14 VZ (V) Tj = 25 °C VZ = 4.7 V to 12 V Working current as a function of working voltage; typical values Fig. 6. Working current as a function of working voltage; typical values 006aab248 102 IZ (mA) VZ(nom) (V) = 13 10 1 14 15 16 18 20 22 24 27 30 33 36 10- 1 10- 2 10- 3 10 20 30 VZ (V) 40 Tj = 25 °C VZ = 13 V to 36 V Fig. 7. Working current as a function of working voltage; typical values PZUXBA_SER Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 October 2023 © Nexperia B.V. 2023. All rights reserved 8 / 12 PZUxBA series Nexperia Single Zener diodes 11. Package outline 1.35 1.15 1.1 0.8 0.45 0.15 1 2.7 2.3 1.8 1.6 2 0.40 0.25 0.25 0.10 Dimensions in mm Fig. 8. 03-12-17 Package outline SOD323 (SC-76) 12. Soldering 3.05 2.1 solder lands solder resist 1.65 0.95 0.5 (2×) 0.6 (2×) solder paste occupied area 2.2 Dimensions in mm 0.5 (2×) 0.6 (2×) Fig. 9. sod323_fr Reflow soldering footprint SOD323 (SC-76) 5 2.9 1.5 (2×) solder lands solder resist occupied area 2.75 1.2 (2×) Dimensions in mm preferred transport direction during soldering sod323_fw Fig. 10. Wave soldering footprint SOD323 (SC-76) PZUXBA_SER Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 October 2023 © Nexperia B.V. 2023. All rights reserved 9 / 12 PZUxBA series Nexperia Single Zener diodes 13. Revision history Table 9. Revision history Document ID Release date Data sheet status Supersedes PZUXBA_SER v. 2 20231012 Product data sheet PZUXBA_SER v. 1 Modifications: • • • • • PZUXBA_SER v. 1 PZUXBA_SER Product data sheet The format of this data sheet has been redesigned to comply with the identity guidelines of Nexperia. Legal texts have been adapted to the new company name where appropriate. Section "Packing information" removed. Obsolete products, which end with /DG, removed. Product(s) changed to non-automotive qualification. Please refer to nexperia.com for automotive (-Q) product alternative(s). 20220810 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 October 2023 - © Nexperia B.V. 2023. All rights reserved 10 / 12 PZUxBA series Nexperia Single Zener diodes 14. Legal information injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Data sheet status Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Document status [1][2] Product status [3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] [2] [3] Please consult the most recently issued document before initiating or completing a design. The term 'short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the internet at https://www.nexperia.com. Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet. Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. Right to make changes — Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — Nexperia products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an Nexperia product can reasonably be expected to result in personal PZUXBA_SER Product data sheet Applications — Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of Nexperia products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products — Unless this data sheet expressly states that this specific Nexperia product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. Nexperia accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without Nexperia’s warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond Nexperia’s specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies Nexperia for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond Nexperia’s standard warranty and Nexperia’s product specifications. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 October 2023 © Nexperia B.V. 2023. All rights reserved 11 / 12 PZUxBA series Nexperia Single Zener diodes Contents 1. General description...................................................... 1 2. Features and benefits.................................................. 1 3. Applications.................................................................. 1 4. Quick reference data....................................................1 5. Pinning information......................................................2 6. Ordering information....................................................2 7. Marking.......................................................................... 2 8. Limiting values............................................................. 3 9. Thermal characteristics............................................... 3 10. Characteristics............................................................ 3 11. Package outline.......................................................... 9 12. Soldering..................................................................... 9 13. Revision history........................................................10 14. Legal information......................................................11 © Nexperia B.V. 2023. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 12 October 2023 PZUXBA_SER Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 12 October 2023 © Nexperia B.V. 2023. All rights reserved 12 / 12