RFEP24-300

Module subsystem for solid-state energy RFEM24-250 2.45 GHz RF Energy Module The RFEM24-250 is a fully integrated 2.45 GHz, 250 W RF generator module that includes full measurement capabilities. Its microcontroller includes an RF source that drives a 3-stage RF amplifier lineup. Its comprehensive command set controls parameters such as frequency, phase and power. The extensive measurement system provides calibrated data from multiple internal sensors and supports closed loop operations. FEATURES TYPICAL PERFORMANCE  RF module subsystem with integrated RF source Frequency 2400-2500 MHz  50 ohm output port RF power output 250 W @ 30 V  I C communications interface Efficiency 57%  Comprehensive sensing includes: Output amplifier power 24-32 V, 15 A Max  forward and reflected RF power VSWR Unlimited  current and voltage RF power measurement ± 5%  temperature Control power 5 V, 0.5 A Max 2  Integrated hardware-based fault protection  Up to 4 modules can be combined and synchronized CHOOSING A SOLUTION HARDWARE OVERVIEW Which Solution Works Best for Me? MRF24300N  RFEL24-500 Coupler  RFEM24-250  RFEP24-300 Circulator Current Sensor 300 W Termination MHT1008N RFEM24-250 RF energy module includes:  I2C controlled module  Interface documentation for module runtime software Kinetis Debug Interface MMA25312B Kinetis® KW40 User needs to supply: Size: 5.5” x 3.2” x 1” (14 cm x 8 cm x 2.5 cm)  Cooling system (heatsink, fans), 30-32 V, 500 W power supply unit, USB to I2C interface  Software for interacting with the module RF COOKING EXAMPLE IMPLEMENATION BLOCK DIAGRAM BLOCK DIAGRAM RF-enabled Processor Intermodule Bus Communications Host Control Bus I2 C RFEL24-500 RF energy lab box is a complete turnkey solution including two modules and hardware peripherals as well as a PC-based GUI and API (object code only). System Manager RF Power Amplifiers Synthesizer Control Clock Sense V A VSWR System Health Monitoring Subsystem Clk In System Clock Selection Logic NXP Technology RFEP24-300 RF energy pallet is a reference design that includes pre-driver, driver and final-stage amplifiers. Note: Schematics and layout of the hardware are not included (module is not a reference design) www.nxp.com/RFenergy NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their respective owners. © 2018 NXP B.V. RFEM24-250FS Rev. 1 6/2018 Communication Interface Coupler