SSL5015TE
Compact non-dimmable LED driver IC
Rev. 2 — 26 February 2014
Product data sheet
1. General description
The SSL5015TE is a high-voltage Integrated Circuit (IC) controller with an integrated
MOSFET for driving LED lamps in general mains non-dimmable lighting applications. The
IC is dedicated to 100 V (AC) or 120 V (AC) input applications.
The main benefits of these products are:
•
•
•
•
Small Printed-Circuit Board (PCB) footprint, and compact solution
High efficiency (up to 93 %)
High input power factor (> 0.95); low Total Harmonic Distortion (THD; < 20 %)
Intermediate power factor (PF > 0.7); low ripple (< 5 %); minimum external
component count
• Enhanced power capability
• Low electronic Bill Of Material (BOM)
The SSL5015TE operates in Boundary Conduction Mode (BCM) with peak current
modulation, providing an input power factor correction. The IC is typically configured to a
buck converter. It can start up directly from the HV pin using an internal high-voltage
current source. When the converter is switching, VCC is supplied through the DVDT pin by
a capacitor coupled to the DRAIN pin or by an auxiliary supply. This feature simplifies the
VCC supply. It allows a low-cost off-the-shelf inductor to be used, providing flexibility in
application design. The IC supply current is 1.3 mA.
The SSL5015TE comes in a compact HSO8 package incorporating an exposed pad to
enhance the thermal capability for high-power applications, like 18 W T-LEDs or higher
power lamps.
2. Features and benefits
Driving LED strings from a rectified mains supply
Highly integrated switch mode LED driver with integrated 300 V (DC) power switches
Efficient BCM operation with:
No reverse recovery losses in freewheel diode
Zero Current Switching (ZCS) for turn-on of switch
Zero voltage or valley switching for turn-on of switch
Minimal required inductance value and size
Direct PWM current regulation possible
Fast transient response through peak current mode control:
SSL5015TE
NXP Semiconductors
Compact non-dimmable LED driver IC
No overshoots or undershoots in the LED current
Internal protections:
UnderVoltage LockOut (UVLO)
Leading-Edge Blanking (LEB)
OverCurrent Protection (OCP)
Internal OverTemperature Protection (OTP)
Brownout protection
Output Short Protection (OSP)
Low BOM LED driver solution (see Figure 3):
No Schottky diode required due to ZCS
Easy external temperature protection with a single NTC resistor
Option for soft-start function
Compatible with wall switches with built-in standby indicator lights1
IC lifetime meets and exceeds the required LED lamp lifetime
3. Applications
The SSL5015TE is intended for low-cost mains non-dimmable LED lighting applications,
including 18 W T-LEDs or higher power lamps, with a high power factor. The IC operates
from 100 V (AC) or 120 V (AC) mains voltages. The output current can be modulated
using a PWM signal.
4. Quick reference data
Table 1.
Symbol
Parameter
Conditions
[1]
Min
Typ
Max
Unit
VCC
supply voltage
operating range
8
-
15
V
RDSon
drain-source on-state
resistance
Tj = 25 C
2.05
2.3
2.55
Tj = 125 C
3.05
3.45 3.85
fconv
conversion frequency
-
100
-
kHz
IDRAIN
current on pin DRAIN
2
-
+2
A
VDRAIN
voltage on pin DRAIN
0.4
-
300
V
[1]
1.
Quick reference data
An internal clamp sets the supply voltage. The current into the VCC pin must not exceed the maximum IDD
value (see Table 5).
The Hotaru switch is a known wall switch with built-in light
SSL5015TE
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 26 February 2014
© NXP B.V. 2014. All rights reserved.
2 of 20
SSL5015TE
NXP Semiconductors
Compact non-dimmable LED driver IC
5. Ordering information
Table 2.
Ordering information
Type number
SSL5015TE
Table 3.
Package
Name
Description
Version
HSO8
plastic small package outline body; 8 leads; body
width 3.9 mm
SOT786-3
Ordering options
Type
Input voltage
Internal MOSFET
characteristics
Package
SSL5015TE
100 V; 120 V
300 V (DC); 2
HSO8
6. Block diagram
+9
9&&
-)(7
6833/ 0 C
RDSon
drain-source on-state resistance
Tj = 25 C
Tj = 125 C
dV/dt)f(DRAIN)
CDRAIN = 150 pF, RSOURCE = 2.2
fall rate of change of voltage on
pin DRAIN
[2]
NTC function
Vth(high)NTC
high threshold voltage on pin
NTC
0.47
Vth(low)NTC
low threshold voltage on pin NTC
0.325 0.35
0.375 V
Vact(tmr)NTC
timer activation voltage on pin
NTC
0.26
0.29
0.325 V
Vdeact(tmr)NTC
timer deactivation voltage on pin
NTC
0.17
0.2
0.23
V
tto(deact)NTC
deactivation time-out time on pin
NTC
33
46
59
s
Ioffset(NTC)
offset current on pin NTC
-
47
-
A
tdet(sc)
short-circuit detection time
16
20
24
ms
toff(high)
high off-time
30
36
42
s
OSP
Temperature protections
Tth(act)otp
overtemperature protection
activation threshold temperature
160
170
180
C
Tth(rel)otp
overtemperature protection
release threshold temperature
90
100
110
C
[1]
An internal clamp sets the supply voltage. The current into the VCC pin must not exceed the maximum IDD value (see Table 5).
[2]
This parameter is not tested during production, by design it is guaranteed.
SSL5015TE
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 26 February 2014
© NXP B.V. 2014. All rights reserved.
13 of 20
SSL5015TE
NXP Semiconductors
Compact non-dimmable LED driver IC
12. SSL5015TE buck configuration
/
)
9PDLQV
/('
59
&;
&
'
&
&
5
%5
75
9PDLQV
/('
&
'
&
5
8
+9
5
6285&(
6285&(
5
5
5
9&&
,&
'5$,1
*1'
'
&
'
'9'7
5
17&
&
&
57
W
5
'
'
4
5
&
5
DDD
Fig 7.
High power factor buck driver using SSL5015TE (PF > 0.95)
Further application information can be found in the application note (Ref. 1).
SSL5015TE
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 26 February 2014
© NXP B.V. 2014. All rights reserved.
14 of 20
SSL5015TE
NXP Semiconductors
Compact non-dimmable LED driver IC
13. Package outline
+62SODVWLFWKHUPDOHQKDQFHGVPDOORXWOLQHSDFNDJH
OHDGVERG\ZLGWKPPH[SRVHGGLHSDG
627
'
$
(
;
F
\
H[SRVHGGLHSDG
+(
Y
$
'K
=
4
$
$
$
(K
$
SLQLQGH[
/S
H
ES
Z
PP
VFDOH
'LPHQVLRQVPPDUHWKHRULJLQDOGLPHQVLRQV
8QLW
PP
$
$
$
$
ES
/
GHWDLO;
F
'
'K
(
(K
PD[
QRP
PLQ
H
+(
/
/S
4
Y
Z
1RWH
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
2XWOLQH
YHUVLRQ
5HIHUHQFHV
,(&
-('(&
-(,7$
\
=
ș
VRWBSR
(XURSHDQ
SURMHFWLRQ
,VVXHGDWH
627
Fig 8.
ș
Package outline SOT786-3 (HSO8)
SSL5015TE
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 26 February 2014
© NXP B.V. 2014. All rights reserved.
15 of 20
SSL5015TE
NXP Semiconductors
Compact non-dimmable LED driver IC
14. Abbreviations
Table 8.
Abbreviations
Acronym
Description
BCM
Boundary Conduction Mode
BOM
Bill Of Materials
LED
Light Emitting Diode
LEB
Leading-Edge Blanking
MOSFET
Metal-Oxide Semiconductor Field-Effect Transistor
OCP
OverCurrent Protection
OSP
Output Short Protection
OTP
OverTemperature Protection
PCB
Printed-Circuit Board
PWM
Pulse-Width Modulation
UVLO
UnderVoltage LockOut
ZCS
Zero Current Switching
15. References
[1]
SSL5015TE
Product data sheet
AN11041 — SSL21081, SSL21083, and SSL2109 non-dimmable buck converter in
low ripple configurations
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 26 February 2014
© NXP B.V. 2014. All rights reserved.
16 of 20
SSL5015TE
NXP Semiconductors
Compact non-dimmable LED driver IC
16. Revision history
Table 9.
Revision history
Document ID
Release date
Data sheet status
Change notice Supersedes
SSL5015TE v.2
20140226
Product data sheet
-
Modifications:
SSL5015TE v.1
SSL5015TE
Product data sheet
•
SSL5015TE v.1
The data sheet status has changed from Preliminary to Product.
20140129
Preliminary data sheet
-
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 26 February 2014
-
© NXP B.V. 2014. All rights reserved.
17 of 20
SSL5015TE
NXP Semiconductors
Compact non-dimmable LED driver IC
17. Legal information
17.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
17.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
17.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
SSL5015TE
Product data sheet
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 26 February 2014
© NXP B.V. 2014. All rights reserved.
18 of 20
SSL5015TE
NXP Semiconductors
Compact non-dimmable LED driver IC
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
17.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
GreenChip — is a trademark of NXP N.V.
18. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
SSL5015TE
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 26 February 2014
© NXP B.V. 2014. All rights reserved.
19 of 20
SSL5015TE
NXP Semiconductors
Compact non-dimmable LED driver IC
19. Contents
1
2
3
4
5
6
7
7.1
7.2
8
8.1
8.2
8.3
8.3.1
8.3.2
8.3.3
8.3.4
8.3.5
8.3.6
8.4
8.5
8.6
8.7
8.8
9
10
11
12
13
14
15
16
17
17.1
17.2
17.3
17.4
18
19
General description . . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Quick reference data . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 3
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pinning information . . . . . . . . . . . . . . . . . . . . . . 4
Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4
Functional description . . . . . . . . . . . . . . . . . . . 5
Converter operation . . . . . . . . . . . . . . . . . . . . . 5
Valley detection. . . . . . . . . . . . . . . . . . . . . . . . . 5
Protective features . . . . . . . . . . . . . . . . . . . . . . 6
UnderVoltage LockOut (UVLO) . . . . . . . . . . . . 6
Leading-Edge Blanking (LEB) . . . . . . . . . . . . . 7
OverCurrent Protection (OCP) . . . . . . . . . . . . . 7
OverTemperature Protection (OTP) . . . . . . . . . 7
Brownout protection . . . . . . . . . . . . . . . . . . . . . 7
Output Short Protection (OSP) . . . . . . . . . . . . . 7
VCC supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
DVDT pin supply (dV/dt) . . . . . . . . . . . . . . . . . . 8
VCC regulator . . . . . . . . . . . . . . . . . . . . . . . . . . 8
NTC function and PWM current regulation . . . . 9
Heat sink. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . 11
Thermal characteristics . . . . . . . . . . . . . . . . . 11
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . 12
SSL5015TE buck configuration . . . . . . . . . . . 14
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 15
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 16
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 17
Legal information. . . . . . . . . . . . . . . . . . . . . . . 18
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 18
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Contact information. . . . . . . . . . . . . . . . . . . . . 19
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2014.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 26 February 2014
Document identifier: SSL5015TE