TWR-LS1021A-PB

QorIQ LS1 Processor Family TWR-LS1021A: Tower System Module Rapid Prototyping Platform for IoT and Industrial Control Applications Target Applications • Secure access point Overview • Secure hot spot The QorIQ TWR-LS1021A Tower system module is the most feature-rich and high-performance Tower system offered by Freescale. It enables compatibility and interoperability with the growing list of Tower expansion modules, providing an easily accessible and interchangeable suite of capabilities and features to support rapid prototyping as well as software development programs. The TWR-LS1021A module is engineered to enable a wide range of applications, from IoT gateways to industrial controllers, secure access points and asset management systems. Customers benefit from the high level of integration, excellent balance of performance to power, and robust reliability. • Secure IoT gateways • HMI enabled Programmable Logic Controller • Secure network attached storage (NAS) • Asset management and tracking • HMI enabled controller Setting the TWR-LS1021A module apart is its outstanding level of performance delivered by the QorIQ LS1021A processor incorporating dual ARM® Cortex®-A7 cores running up to 1 • Robotics GHz and delivering more than 5,000 Coremarks of performance. The module offers higher integration levels than any prior Tower main processor board, which enables true single board designs to be supported. As a result, both design effort and complexity are reduced. In addition, the TWR-LS1021A module offers HDMI, SATA3 and USB3 connectors and a complete Linux software developers package. The TWR-LS1021A module provides a comprehensive level of security that includes support for secure boot, Trust Architecture and tamper detection, in both standby and active power modes. Together, these features safeguard the device from the point of manufacture to the point of deployment. This ensures the device is protected from malicious hacking and guarantees end products can support highly secure nodes. Ready-to-Use Design The QorIQ TWR-LS1021A module, as well as the TWR-LCD and TWR-IND-IO expansion modules can be ordered from Freescale Direct or our authorized distributors. The kit includes a fully tested TWR-LS1021A main processor module, Quick Start Guide, User Manual, power cord and connector cables. Freescale also makes available the complete board design files including schematics, bill of materials and GERBER files at no charge. Ordering Information Orderable Part Number Price ($USD Suggested Resale) TWR-LS1021A $269 Figure 1. TWR-LS1021A module (TWR-LS1021A, TWR-SER-IO and TWR-ELEV) Key Features: • QorIQ LS1021A processor, featuring dual • Muxed LCD/QE interface Flash programmer ARM Cortex-A7 cores, 32 KB I/D L1 cache 24-bit LVDS LCD interface with ECC protection, 512 KB coherent L2 1x HDMI connector • Certification: FCC Class B and CE 2x QE UART to TWR-ELEV for • Expansion Options: cache with ECC protection • 1 Gb Parallel NOR Flash • 128 Mb Quad SPI Flash UART to USB converter PROFIBUS or RS485 (external Tower Boards supported via TWR-EVEL transceiver needed) TWR-IND-IO • Audio • 1 GB DDR3L • Full-size SDHC slot—up to 32 GB • 4 Kb EEPROM -2  x CAN, RS485, RS232 (up to two boards supported) Audio OUT via HDMI or Jack plug TWR-LCD Audio IN via onboard mic TWR-LCD-RGB • USB 3.0 • 2x 10/100/1000 Ethernet (SGMII) • 1x 10/100/1000 Ethernet (RGMII) • 2x mini PCIe (x1) connectors (802.11ac/n/g, combo 802.11/Bluetooth, 802.15.4, 6Lowpan as well as 4G/LTE cards) 2x ports—USB-type A 2x ports to mini PCIe slots (LTE/4G TWR-ETHERCAT-SLV • Included in Kit: Linux and CodeWarrior ARM toolchain software included cellular radios) • 2x SPI bus and 3x I2C bus Reference design (schematics, layout and BOM available) • OpenSDA debug support Hardware Quick Start Guide and User Guide Run-control debug • 1x mSATA 3.0 slot CodeWarrior Development Suites for Networked Applications CodeWarrior Development Studio for QorIQ LS series featuring ARM v7 is a development Top of Board 10-pin JTAG Power connection SATA3 connector HDMI connector 1x USB2 mini port ® software tool created by Freescale and is based on award-winning CodeWarrior IDE On-board mic 2x Gb Ethernet ports Speaker jack technology. This software is one of the first software tools used and developed in lockstep with the Freescale QorIQ LS LS1021A processor series of communications processors. The software can be obtained by purchasing any of the CodeWarrior Development Suites for 1x Gb Ethernet port and 2x type A USB3.0 ports Bottom of Board Networked Applications. The Tower Edition suite contains the complete CodeWarrior Development Studio for QorIQ LS Series for ARMv7 ISA. It is optimized to provide an economic development platform for the Tower System Full size SD card slot modules only. It is an easy upgrade to extend the Tower Edition to the Suite Edition and works with any QorIQ LS series-based boards. For more information please visit 2x Mini PCIe Connector freescale.com/CWARM7 To learn more, visit freescale.com/TowerSystem Freescale and the Freescale logo, QorIQ and CodeWarrior are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. Layerscape and Tower are trademarks of Freescale Semiconductor, Inc. ARM, and Cortex are registered trademarks of ARM Limited (or its subsidiaries) in the EU and/or elsewhere. All other product or service names are the property of their respective owners. © 2014 Freescale Semiconductor, Inc. Document Number: TWRLS1021AFS REV 0