5475E

Control Knobs Instrument Knobs 5200E, 5205E 5210E, 5220E F e at u r e s • Phenolic material provides heat and impact resistance for durability • Can be customized with decorative inlays, indicator lines, or slots • Engraving, hot stamping, and pad printing available for a distinct appearance 5240E, 5250E 5300E 5302E Ohmite Dimensions (inches) Part A B C D E 25/32 15/32 21/32 13/32 5210E 19/32 11/32 15/32 33/64 35/64 31/64 27/64 5200E 5205E 1 5220E 13/4 5240E 19/32 5300E 17/32 5250E 5302E 15/16 25/32 5304E 11/32 5475E 1 5450E 11/16 27/32 115/32 25/32 5/8 29/32 11/2 3/4 3/8 1/2 45/64 19/32 7/32 5/8 17/32 17/32 13/32 5/8 11/32 11/16 1/2 7/8 15/16 17/32 7/16 5304E Set screw 5450E Shaft Finish hole* ** 7/32 M3 x 0.5 BB SDL 21/32 M4 x 0.7 BB SDL 37/64 13/16 23/64 19/32 7/16 9/32 9/32 3/16 9/32 M4 x 0.7 M4 x 0.7 M3 x 0.5 M4 x 0.7 BB SDL BB D E A L SCL 8-32 PH SCL 8-32 B L BB PH 8-32 C SDL BB 6-32 8-32 5475E PH SCL PH Material type: Thermoset Inset diam.: 1/4 in. - PH *PH=Plain Hole BB=Brass Bushing **SDL=Silver Disc Lined; L=Lined; SCL=Silver Cap Lined Pointer Knobs 5400E 5470E F e at u r e s • Phenolic material provides heat and impact resistance for durability • Terrific range of styles and sizes • Indicator line available on several of the pointer knobs for precise settings • Samples available 5500E, 5520E, 5521E Ohmite Part A 5510E, 5511E Dimensions (inches) B D E 5400E 27/32 13/32 11/32 3/16 5500E 11/8 9/16 9/32 9/32 5511E 3/4 9/16 5470E 5510E 1 3/4 5520E 11/2 5521E 11/2 5522E 11/8 5600E 17/32 5601E 17/32 5602E 17/32 5610E 13/16 1/2 9/16 3/4 7/16 13/32 7/16 Finish ** 8-32 1/4 PH - 8-32 1/4 PH 8-32 8-32 9/32 7/16 9/32 9/32 9/32 7/32 L PH L Spring 8-32 1/4 BB 8-32 1/2 1/4 PH 1/4*** 9/32 5/16 1/4 - 7/16 1/2 1/2 Shaft hole* 8-32 5/8 5/8 - Insert diam. 5/16 7/16 5/8 7/32 Set screw 5/8 3/4 5/8 9/32 5600E, 5601E, 5602E 5522E 8-32 8-32 8-32 8-32 1/4 L L 1/4 PH L 1/4 PH L PH - 1/4 1/4 PH BB *PH=Plain Hole BB=Brass Bushing **L=Lined ***1/4" flatted to 5/32" 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com D E A L PH 1/4 B 5610E L - L Material type: Thermoset Control Knobs Ski r t e d K n o b s F e at u r e s • Available in phenolic to provide appearance, strength, and heat resistance for a variety of applications • Sizes, shapes, decorative inlays, and graphics to enhance your products • Engraving, hot stamping, and pad printing available • Skirt adds level of decoration • Samples available 5700E, 5701E 5710E, 5730E, 5740E Ohmite Dimensions (inches) Part A B C D E 5700E 5701E 5710E 1/2 1/2 3/4 5713E 11/8 5719E 11/8 5730E 11/2 5740E 21/32 5800E 11/2 5/8 15/32 1/2 17/32 13/32 5/8 11/4 1/2 5/8 5/8 15/32 13/16 7/8 11/64 11/16 5/8 15/16 13/8 1/2 1/2 1/2 3/4 13/16 9/16 5713E, 5719E Set screw Shaft hole* 3/16 6-32 PH 7/32 8-32 PH 9/32 8-32 BB 3/16 6-32 9/32 5/16 9/32 - C BD L E L PH A L L 8-32 PH SDL 8-32 PH L 8-32 (2) *PH=Plain Hole BB=Brass Bushing **L=Lined SD=Silver Disc SDL=Silver Disc Lined Finish ** PH 8-32 9/32 5800E PH SDL Material type: Thermoset Inset diam.: 1/4 in. T r a n s i l l u m i n at e d / S o f t T o u c h K n o b s F e at u r e s • Soft thermoplastic elastomer • Two shot molding process enables multiple materials to be embedded into one part • Available in black TPE over white or clear indicator to provide comfort and style to your application • Call for any other color or combination • Matte finish C Ohmite Dimensions (inches) Part A B C D E Soft Touch Knobs 5940E 13/8 27/32 13/8 23/32 5930E 157/64 1 157/64 7/8 5920E 15/8 61/64 15/8 7/8 1/4 9/32 E Transilluminated Knobs 5941E 13/8 5921E 15/8 5931E 157/64 27/32 13/8 23/32 1/4 1 157/64 7/8 9/32 61/64 15/8 7/8 E A 5/16 5940E, 5920E, 5930E Ohmite Dimensions (inches) Part A B C D BD Material type: Thermoplastic overmold Inset diam.: 1/4 in. Set screw: 8-32 Shaft hole: Brass bushing Finish: Matte 1/4 5941E, 5921E, 5931E C USTOM I Z AT I ON In order to save you time and money, Ohmite offers a wide array of secondary operations and finishing services. Most of our parts can be customized to your specific need. Our secondary operations and finishing services include: • Hot Stamping • Drilling • Pad Printing • Engraving • Ultrasonic Welding • Branding • Paint Fill • Decorative Pointers • Machining • Turning • Tapping • Bagging • Buff and Polish • Sand Blasting • 3-D CAD Imaging • Assembly • Packaging • Custom Color rev 6/18-1 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com Matching • Kitting • Silk Screen • Decorative Inlays • Plating • Vacuum Metalizing • Paint Coatings