605SJR00375-T

Metal Plate Current Sense Resistors Surface Mount Metal Alloy Resistor 60S Series 602SJR, 605SJR 610SJR W W L • Current sensing • Low inductance • AC applications (please contact factory) • Feedback • Surge & pulse 100 H L2 D A 80 Percent Rated Power L APPLICATIONS • Superior thermal expansion cycling • Inductance less than 10 nanohenries • Flameproof • Solderable pads: Tin (Sn) plate • Lead flexible for thermal expansion • Low termination stress (“J” leads) • Shape provides cooler operation • Custom values available DERATING H L2 FEATURES Copper Nickel Alloy Termination Power TCR Rating Type Tolerance (ppm/C°) (watts) 602SJR ±5% ±100 0.25 @ 25°C 605SJR ±5% ±100 0.5 @ 25°C 610SJR ±5% ±350 1 @ 70°C DIMENSIONS Resistance Rated Range Ambient (Ω) Temp. (°C) 0.002-0.010 +70°C 0.002-0.005 +70°C 0.002-0.003 +85°C Operating Temp. Range (°C) -40 - +155 -40 - +155 -40 - +155 L2 H W 602SJR 0.39 ± .008 (10.0 ± 0.2) 0.018 ± .008 (2 ± 0.2) 0.024 (0.6 ± 0.1) 0.118 ± .008 (3.0 ± 0.2) 605SJR 0.39 ± .008 (10.0 ± 0.2) 0.018 ± .008 (2 ± 0.2) 0.079 (2 max.) 0.20 ± .008 (5.2 ± 0.2) L H 610SJR 0.44 ± .016 (11.2 ± 0.4) D 0.137 ± .016 (3.5 ± 0.4) A 0.00200Ω 0.00300Ω 0.00375Ω 0.00500Ω 0.00800Ω 20 50 70 100 200 155 Ambient Temperature, °C 0 250 275 PERFORMANCE CHARACTERISTICS Parameter Requirement Test Method (JIS C 5202) Resistance Within regulated tolerance 25°C T.C.R. Within specified T.C.R. Room temperature/100°C up Resistance to Solder ±2.0% Heat W 0.095 ± .010 0.189 ± .030 0 .126 ± .016 (2.35 ± 0.25) (4.8 ± .75) (3.2 ± 0.40) STOCK PART NUMBERS AVAILABLE Ohms Area of recommended operation 40 0 -40 inches (mm) L 60 350°C ± 10°C, 3 seconds Solderability 95% coverage minimum 235°C ± 5°C, 5 seconds Moisture Resistance ±3.0% 40°C, 90 - 95% RH, 1000 hours, no load Moisture Resistance ±5.0% Power rating x 1/10, 40°C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle Load Life ±5.0% Rating voltage, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle ORDERING INFORMATION Wattage: 0.25 watt 0.5 watt 1 watt Series: 602SJR 605SJR 610SJR 602SJR0100-T 605SJR00200-T 610SJR00200-T 602SJR00300-T 610SJR00300-T 605SJR00375-T 602SJR00500-T 605SJR00500-T 605SJR00800-T Type & Power Rating Tolerance Ohms Terminal Type J = 5% R00200 = 0.00200 T = tape and reel R00375 = 0.00375 (optional) 9 Ohmite Mfg. Co. 1600 Golf Rd., Suite 850, Rolling Meadows, IL 60008 • Tel. 1-866-9-OHMITE • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com Metal Plate Current Sense Resistors Surface Mount Custom Milli-Ohm Resistor 60 Series (continued) PACKAGING SPECIFICATIONS Embossed Carrier .059 (1.5 +0.1 -0 ) B E W A T1 P1 T1 P2 P0 Direction of Feed inches (mm) TAPE Type W P0 P1 P2 T1 602SJR 0.057 0.134 0.069 (1.45 ± 0.2) (3.4 ± 0.2) (1.75 ± 0.1) A B 0.079 (2.0) 0.157 (4.0 ± 0.1) 0.315 (8.0 ± 0.1) 0.079 (2.0) 0.098 (2.5 ± 0.2) 605SJR 0.057 0.224 0.069 (1.45 ± 0.2) (5.7 ± 0.2) (1.75 ± 0.1) 0.079 (2.0) 0.157 (4.0 ± 0.1) 0.315 (8.0 ± 0.1) 0.079 (2.0) 0.091 (2.3 ± 0.2) 610SJR 0.461 0.169 0.069 0.945 0.157 (11.7 ± 0.1) (4.3 ± 0.1) (1.75 ± 0.1) (24.0 ± 0.2) (4.0 ± 0.1) 0.315 (8.0 ± 0.1) 0.079 (2.0) ___ ___ øA øc E W1 Type E øB W H REEL L A W inches (mm) C E W1 602SJR 10.0 3.15 605SJR (255 +0.0 -3.0) (80 +1.0 -0) 0.511 (13.0 ±0.2) 0.079 (2.0 ±0.5) 1.0 (25.5 ± 2.0) 610SJR 0.511 (13.0 ± 0.2) 0.079 (2.0 ± 0.5) 1.0 (25.5 ± 2.0) PAD A 12.99 (330 ± 2.0) B 3.94 (100 ± 2.0) inches (mm) Type L W H A 602SJR 0.622 (16.0) 0.118 (3.0) 0.150 (3.8) 0.394 (10.0) 605SJR 0.622 (16.0) 0.118 (3.0) 0.236 (6.0) 0.394 (10.0) 610SJR 0.369 (9.36) 0.121 (3.07) 0.142 (3.60) 0.127 (3.22) 10 Ohmite Mfg. Co. 1600 Golf Rd., Suite 850, Rolling Meadows, IL 60008 • Tel. 1-866-9-OHMITE • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com