810J1K5E

The 89 Series is a high-performance axial type resistor. These molded-construction metal-housed resistors are available in higher power ratings than standard axial resistors and are better suited to withstanding vibration, shock and harsh environmental conditions. The 89 Series Metal-Mite® resistors are aluminum housed to maintain high stability during operation and to permit secure mounting to chassis surfaces. The metal housing also provides heat-sinking capabilities. SPECIFICATIONS Material Housing: Metal, anodized aluminum. Internal Coating: Silicone. Core: Ceramic. Terminals: Solder-coated axial. Derating: Linearly from 100% @ +25°C to 0% @ +275°C. Metal-Mite® Aluminum Housed Axial Term. Wirewound, 1% Tolerance F A E H B } R N D P terminal hole dia. L M 89 Series Electrical FEATURES • High Stability: ±0.5% ΔR. • High power to size ratio. • Metal housing allows chassis mounting and provides heat sink capability. As of September 2006, the 89 Series is no longer offered as Mil. Spec. Tolerance: ±1% and ±5% (other tolerances available). Power rating: Rating is based on chassis mounting area and temperature stability. Proper heat sink as follows: 5W and 10W units, 4” x 6” x 2” x .040” Aluminum chassis; 25W units, 5” x 7” x 2” x .040” Aluminum chassis; 50W units, 12” x 12” x .059” Aluminum panel. Maximum ohmic values: See chart. Overload: 5 times rated wattage for 5 seconds. Temperature coefficient: Under 1Ω: ±90 ppm/°C 1 to 9.99Ω: ±50 ppm/°C 10Ω and over: ±20 ppm/°C. Dielectric withstanding voltage: 5W and 10W rating,1000 VAC; 25 and 50W ratings, 2250 VAC. G K mount hole dia. C Q J Series 805 810 825 850 Wattage 5 10 25 50 Ohms 0.10-25K 0.10-50K 0.005-75K 0.005-100K Voltage 210 320 520 1170 Non-Inductive versions available. Insert “N” before tolerance code. Example: 850NF560 Series (Industrial) Dim. A (in. ±0.062 / mm ±1.57) Dim. B (in. ±0.010 / mm ±0.25) Dim. C (in. ±0.031 / mm ±0.79) Dim. D (in. ±0.010 / mm ±0.25) Dim. E (in. ±0.062 / mm ±1.57) Dim. F (in. ±0.062 / mm ±1.57) Dim. G (in. ±0.062 / mm ±1.57) Dim. H (in. ±0.031 / mm ±0.79) Dim. J (in. ±0.031 / mm ±0.79) Dim. K (in. ±0.005 / mm ±0.13) Dim. L (in. ±0.031 / mm ±0.79) Dim. M (in. ±0.062 / mm ±1.57) Dim. N (in. ±0.031 / mm ±0.79) Dim. P (in. ±0.005 / mm ±0.13) Q min AWG Dim. R (in., min/mm, min) O R D E R I N G I N F O R M AT I O N Non-Inductive Winding Optional (blank = std. winding) 805NF5R0E Series 805 = 5 Watt 810 = 10 watt 825 = 25 watt 850 = 50 watt Tolerance Ohms RoHS F = 1% R005 = 0.005Ω Compliant J = 5% R10 = 0.1Ω 1R0 = 1.0Ω 250 = 250Ω 1K0 = 1,000Ω 1K5 = 1,500Ω 25K = 25,000Ω 5 watt 10 watt 805 810 Dimensions 1.125 / 28.59 1.375 / 34.93 0.490 / 12.45 0.625 / 15.88 0.078 / 1.98 0.094 / 2.39 0.444 / 11.28 0.562 / 14.28 0.600 / 15.24 0.750 / 19.05 0.266 / 6.76 0.312 / 7.93 0.334 / 8.48 0.438 / 11.13 0.245 / 6.22 0.312 / 7.93 0.646 / 16.41 0.812 / 20.63 0.093 / 2.36 0.094 / 2.39 0.320 / 8.13 0.406 / 10.31 0.133 / 3.38 0.203 / 5.16 0.065 / 1.65 0.094 / 2.39 0.050 / 1.27 0.085 / 2.16 16 12 0.085/ 2.16 0.140/ 3.56 25 watt 825 1.938 / 49.23 0.781 / 19.84 0.172 / 4.37 0.719 / 18.26 1.062 / 26.98 0.438 / 11.13 0.531 / 13.49 0.391 / 9.93 1.094 / 27.79 0.125 / 3.18 0.562 / 14.28 0.281 / 7.14 0.094 / 2.39 0.085 / 2.16 12 0.140/ 3.56 50 watt 850 2.781 / 70.64 0.844 / 21.44 0.188 / 4.78 1.562 / 39.68 1.938 / 49.23 0.438 / 11.13 0.594 / 15.09 0.422 / 10.72 1.156 / 29.36 0.125 / 3.18 0.625 / 15.88 0.312 / 7.92 0.094 / 2.39 0.085 / 2.16 12 0.140/ 3.56 S TA N D A R D PA RT N U M B E R S Wattage Ohmic value Ohmic value 805F––– 5 810F––– 10 825F––– 25 Part No. Prefix  Suffix 0.005–––R005 0.010–––R010 0.025–––R025 0.1 –––R10 0.3 –––R30 0.5 –––R50 0.7 –––R70 1.0 –––1R0 1.5 –––1R5 2.0 –––2R0 3.0 –––3R0 4.0 –––4R0 5.0 –––5R0 10.0 –––10R 15.0 –––15R   850F––– 50 Part No. Prefix  Suffix –––20R –––25R –––30R –––40R –––50R –––75R –––100 –––150 –––200 –––250 –––300 –––400 –––500 –––750 –––1K0  Wattage Ohmic value 805F––– 5 810F––– 10 825F––– 25 850F––– 50 Part No. Prefix  Suffix –––1K5 –––2K0 –––2K5 –––3K0 –––3K5 –––4K0 –––4K5 –––5K0 –––6K0 –––10K –––15K –––20K –––25K –––50K –––75K –––100K  Wattage 805F––– 5 810F––– 10                            825F––– 25 850F––– 50                                     20 25 30 40 50 75 100 150 200 250 300 400 500 750 1,000                                               1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000 6,000 10,000 15,000 20,000 25,000 50,000 75,000 100,000     = Standard values  = Non-standard values subject to minimum handling charge per item Shaded values involve very fine resistance wire and should not be used in critical applications without burn-in and/or thermal cycling.       Check product availability at www.ohmite.com Ohmite Mfg. Co. 1600 Golf Rd., Rolling Meadows, IL 60008 • 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 23