ACS5S22RJ-T

ACS Silicon Coated Axial Resistors The design of the ACS resistor provides a good balance of power density, stability and resistance to environment for a broad range of industrial power applications, such as drives and controls. • Good ratio between power capability and physical size • Wound to maximise high pulse capability • Low inductive versions available • Available on tape and reel 1W to 5W or bulk • RoHS Compliant Characteristics Tolerance (Code): Standard J (±5%) and K (±10%); other tolerances available on request Temperature coefficient: 10R ± 20ppm/°C Insulation resistance: 1, 000M ohms minimum dry, 100M ohms minimum after moisture test Dielectric withstand voltage: 500V AC MIL types: Available upon request. Electrical Specifications Wattage 100 Resistance range for 5% tolerance Max working voltage (V) Inductive Non Inductive (N) ACS 1 1 50 R01 - 8K R01 - 3K ACS 2 2 100 R01 - 10K R01 - 4K ACS 3 3 200 R02 - 18K R02 - 9K ACS 5S 5 157 R05 - 22K R05 - 10K ACS 5L 5 400 R05 - 35K R05 - 17K ACS 7 7 450 R06 - 50K R06 - 25K ACS 10S 10 700 R1 - 70K R1 - 35K ACS 10L 10 800 R5 - 100K R3 - 50K 80 Rated load % Type Derating Curve ACS 1 ACS 10L 60 40 ACS 5S 20 0 0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 Temperature ˚C Typical Inductance Ordering Procedure Standard Resistor To specify standard: Series, Wattage Rating, Winding Type, Resistance and Tolerance Code, e.g.: ACS3 18K F ACS3N 18K F (non-inductive) Type 50 ohms ACS 1 - ACS2 0.2µH 0.37µH ACS 3 - ACS5L 0.3µH 0.6µH ACS 7 - ACS 10L 0.65µH 1.2µH As specified by MIL-R-39007. Max series inductance at 0.5MHz. Tolerance (Code) ±1% (F), ±5% (J), ±10% (K) ARCOL UK Limited, The information contained herein does not form part of Threemilestone Ind. Estate, a contract and is subject to change without notice. Arcol Truro, Cornwall, TR4 9LG, UK. operate a policy of continual product development, therefore, T  +44 (0) 1872 277431  specifications may change. F  +44 (0) 1872 222002  E sales@arcolresistors.com www.arcolresistors.com It is the responsibility of the customer to ensure that the component selected from our range is suitable for the intended application. If in doubt please ask Arcol. Page 1 of 2 7 / 12.30 ACS Silicon Coated Axial Resistors Dimensions (mm) C B C D E Type B ± 1.5 C ± 1.0 D ± 0.02 E ± 0.8 ACS 1 12 37.0 0.8 4 ACS 2 13.8 35.0 0.8 4.7 ACS 3 15.7 35.0 0.8 5.9 ACS 5S 13 35.0 0.8 3.5 ACS 5L 22.5 44.0 1.0 8.52 ACS 7 24.5 44.0 1.0 8.52 ACS 10S 43.7 35 1.0 8.52 ACS 10L 46.2 33.0 1.0 10.5 ARCOL UK Limited, The information contained herein does not form part of Threemilestone Ind. Estate, a contract and is subject to change without notice. Arcol Truro, Cornwall, TR4 9LG, UK. operate a policy of continual product development, therefore, T  +44 (0) 1872 277431  specifications may change. F  +44 (0) 1872 222002  E sales@arcolresistors.com www.arcolresistors.com It is the responsibility of the customer to ensure that the component selected from our range is suitable for the intended application. If in doubt please ask Arcol. Page 2 of 2 7 / 12.30