AF-C06-SD

AF Series IEC Inlet Single Phase EMI Filters The Ohmite AF series range of IEC Inlet type filters come in three designs. They are available with a fuse and switch and are designed to suppress undesirable electrical disturbances in Power Lines. They limit the amplitude of interfering voltages on AC power lines and prevent them from propagating into or out of the filtered equipment. F e at u r e s a p p l i c at i o n s • Integral IEC Connector • Excellent performance/ size ratio • Single/Double Fuse Option • Rated current up to 15 A • Snap-in or Screw Mount • High Conducted attenuation performance • Double Pole/Single Throw Switch • Medical versions available • Electrical & Electronic Equipment • Testing & Measurement Equipment • Household equipment • Rack mounting equipment • Power Systems • Frequency converters • Stepper motor drives • UPS/Inverters characteristics i n s e r t i o n l o ss -10 -30 -40 -50 -60 -80 -90 Start 30.00kHz -10 -20 Operating Frequency 50/60Hz -30 High Potential test voltage L to G 2120VDC for 1 Minute; L to L 1414VDC for 1 Minute Overload Capability 135% of Rated current for 15 min. Design corresponding to UL60939-3, CSA 22.2 No.8-13 and IEC 60939 1A 2A 3A 6A 10A 15A -70 Max. Cont. Oper. Voltage 250VAC Current ratings AF-A: 1A to 15A @40°C, AF-B: 1A to 6A @40°C; AF-C: 1A to 10A @40°C AF-A -20 Stop 30.00MHz AF-B -40 -50 -60 1A 3A 6A -70 -80 -90 Flammability corresponding to UL 94 V-0 Start 30.00kHz Stop 30.00MHz Temperature range -25°C to +85ºC Climatic Category 25/85/21 Enclosure Material AF-A and B: Aluminium; AF-C: CRCA Termination Fastons 6.3 X 0.8mm Leakage Current 0.34 mA @250VAC -10 AF-C -20 -30 -40 -50 -60 1A 3A 6A 10A -70 -80 -90 Start 30.00kHz Stop 30.00MHz (continued) 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 1 AF Series IEC Inlet Single Phase EMI Filters dimensions All dimensions in mm; Tolerances according to ISO2768-m 32 Ø3.5 CSK 26 ±.50 22 22 40.5 ±.50 40 ±.20 29 24 29 6.3 x 0.8 AF-A Snap-in option 40.5 47 ±.50 49.5 ±.50 31.2 43.2 Ø3.2 CSK 33 ±.3 40 ±.50 33 44 ±1 36 ±.20 29.5 AF-B 30.5 Snap-in option 49 ±1 61 ±1 (Double fuse) 51 ±1 63 ±1 (Single fuse) 33.5 R2.5 47.5 ±.5 61 ±.50 AF-C 28.5 ±.50 31 ±.50 43.5 ±.50 40 ±.50 58 ±0.50 Snap-in option 44 ±0.50 57 ±0.50 29.2 ±.50 6.3 x 0.8 FASTON 29.7 57.4 R2 49.5 ±.50 2 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com AF Series IEC Inlet Single Phase EMI Filters c i r c u i t d i ag r a m s AF-A L I E N E AF-B L L L L' Cy Cx R E Cy L O A D L I E N E N' N AF-C L L I E N E N F1 N F1 L1 R Cy F2 L' Cy E R F2 Cy L O A D N' ORDERIN G IN F ORM A TION Fuse D = Dual blank = single/none AF-A02-SD Series Configuration Current Mounting S = Screw mount A = Inlet filter base rating N = Snap-in mount B = Inlet filter fuse C = Inlet filter fuse and switch Part No. Rated current @40°C Weight (g) AF-A01-S AF-A02-S AF-A03-S AF-A06-S AF-A10-S AF-A15-S 1A 2A 3A 6A 10A 15A 60 60 60 60 60 60 AF-B01-S AF-B03-S AF-B06-S 1A 3A 6A 60 60 60 AF-C01-SD AF-C03-SD AF-C06-SD AF-C10-SD 1A 3A 6A 10A 120 120 120 120 rev 05/20-1 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com E L O A D N' L1 Cx L' Cy Cx 3