AP-01

AP Series Single Phase EMI Filter Cost saving plastic housing designed for standard applications. Protection against interference voltage from the mains interferences generated in the equipment are strongly attenuated. F e at u r e s app l i c a t i o n s • PCB Mountable Filters • Rated currents up to 6 A • Medical versions available • High conducted attenuation performance • Plastic housing for standard applications • Protection against interference voltage • Cost Effective • SMPS • Monitor • PLC • Weighing scales • Electronic instrument • PC periphery • Microwave Equipment • Office Automation Equipment i n s e r t i o n l o ss -10 -20 -30 -40 -50 -60 -80 -90 characteristics Start 30.00kHz Maximum Continuous 250VAC Operating Voltage -10 Operating Frequency 50/60Hz -20 Current ratings 1A to 6A @40°C Overload Capability 135% of Rated current for 15 minutes Design corresponding to UL 60939-3, CSA 22.2 No.8-13 and IEC 60939 Flammability corresponding to UL 94 V-0 -40 -50 -60 3A 6A -70 -80 -90 Temperature range -25°C to +85ºC Start 30.00kHz 25/85/21 Weight 30 gram All dimensions in mm; Tolerances according to ISO2768-m Leakage Current 0.34 mA @250VAC/50Hz (mA) 2.5 c i r c u i t d i ag r a m L I E N E N 15 10 L Cx Stop 30.00MHz dimensions Termination 0.8mm Lead L Stop 30.00MHz -30 High Potential test voltage L to G 2120Vdc for 1 Minute, L to L 1414Vdc for 1 Minute Climatic Category 1A 2A -70 0.8 20 L' Cy Cy E L O A D 25 ±.2 25 ±.2 25 ±.2 10 ORDERIN G IN F ORM A TION N' AP-03 Series rev 05/20-1 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 1 Current rating 1, 2, 3 & 6 amp