AX56GKE

The “A” Series non-inductive, ceramic composite resistors are designed for a variety of applications where high energy handling capabilities are crucial. These resistors are ideal for any application which is subject to surges, high peak power, or impulse energy. Their unique design allows uniform distribution of energy throughout their structure which results in low thermal stress. The high-temperature, solvent-resistant epoxy coating carries a UL94V0 flammability rating which is suitable for almost any environment. APPLICATIONS • Motor Drives • Power Supplies, UPS • Power Conversion • In-Rush Current Limiting PulsEater® Ceramic Composition Available in E12 Ohmic values A Series AZ SPECIFICATIONS Material Resistance Element: Bulk Ceramic Terminals: Radial; 100% Sn solder coated radial (60/40 solder available upon request) Coating: UL94V0, solvent resistant epoxy Electrical Tolerance: ±10% Standard Operating Temp. Range: -55°C to 150°C Derating: Derates linearly from 100% @ 50°C to 0% @ 150°C Temperature Rise: 100°C @ 100% rated power, 50°C ambient AW, AX, AY L DH L D 4.7mm S Offset crimp width is 2x terminal wire gauge 16.7mm S AZ series also available with crimps upon request FEATURES • High Surge Energy • Non-Inductive • Small Size 7.6mm O R D E R I N G I N F O R M AT I O N E = RoHS compliant ������� Size AW = 2.5W AX = 3.5W AY = 4.5W AZ = 5.5W Tolerance Ohm Value K = 10% Standard Example: 33G = 3.3 Ohms 330 = 33 Ohms 331 = 330 Ohms P Resistance1 avg.2 Series (ohms) (watts) AW xxx 4.7 to 15K 2.5 AX xxx 1.0 to 3.3K 3.5 AY xxx 2.2 to 6.8K 4.5 AZ xxx 1.5 to 4.7K 5.5 1E12 L max. (mm) 20 15 25 30 D H max. max. (mm) (mm) 13 19 21 26 21 26 26 S Impulse Term. wire norm. Voltage3 Energy4 gauge (mm) (volts) (joule) (AWG) 17.5 1500 400 20 12.5 1000 700 18 22.5 2000 1400 18 27 2500 2800 18 Standard Values ±10%; 2Free Air 40°C Ambient; 3In Air; 4Single Impulse MOUNTING CLIP D S TA N D A R D S P E C I F I C AT I O N S Parameter Life Test Max. ΔR Test Method +5% MIL-STD-202F, method 108A. except 50°C, 1000 hrs. @ rated power; 1.5 hrs. ON, 0.5 hrs. OFF Single Pulse Energy ±1.5% Single pulse, capacitor discharge at Rated Energy; 350VDC for AW and AX sizes; 650VDC for AY and AZ sizes. Repetitive HV Pulsing ±2.0% 10 joules @ 5.OKV, 10,000 cycles Short-time Overload ±1.5% 10x rated power. 5 seconds ON, 5 seconds OFF, 5 cycles Short-term High Temp ±1.5% 250°C for 30 seconds Long-term High Temp ±2.0% 1000 hours @ 150°C Thermal Shock Cycle ±2.0% MIL-STD-202F, method 107D. -55°C to +125°C, 5 cycles Moisture Resistance ±1.0% 90% to 95% rh @ 40°C, 1000 hrs. Dim. (mm) Part No. D H L 5911E 20 23 13 5910E 25 26 15 This saddle clip conforms to the configuration of Ohmite’s A Series resistor to provide H secure mounting. Made of a durable thermoplastic polyester, the saddle clip is L designed to secure the A Series in place while safely withstanding its operating for Series Color temperatures. Use (2) saddle AX and AY White clips per resistor for extra AZ Black stability. S TA N D A R D VA L U E S F O R A S E R I E S Ohmic value Ohmic value Series AW––– AX––– AY––– AZ––– Ohmic value Series AW––– AX––– AY––– AZ––– Series Part No. Prefix  Suffix –––330K –––390K –––470K –––560K –––680K –––820K –––101K –––121K –––151K –––181K  AW––– AX––– AY––– AZ––– Ohmic value Series Part No. Prefix  Suffix –––221K –––271K –––331K –––471K –––561K –––681K –––821K –––102K  AW––– AX––– AY––– AZ––– Part No. Prefix  Suffix 1.0 –––10GK 1.2 –––12GK 1.5 –––15GK 1.8 –––18GK 2.2 –––22GK 2.7 –––27GK 3.3 –––33GK 3.9 –––39GK 4.7 –––47GK          Part No. Prefix  Suffix 5.6 –––56GK 6.8 –––68GK 8.2 –––82GK 10 –––100K 12 –––120K 15 –––150K 18 –––180K 22 –––220K 27 –––270K               Check product availability at www.ohmite.com 33 39 47 56 68 82 100 120 150 180              220 270 330 470 560 680 820 1000               = Standard values Non-standard values subject to a minimum handling charge per item. Ohmite Mfg. Co. 1600 Golf Rd., Rolling Meadows, IL 60008 • 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 53