AZ102KE

A Series PulsEater® Ceramic Composition Available in E12 Ohmic values The “A” Series non-inductive, ceramic composite resistors are designed for a variety of applications where high energy handling capabilities are crucial. These resistors are ideal for any application which is subject to surges, high peak power, or impulse energy. Their unique design allows uniform distribution of energy throughout their structure which results in low thermal stress. The high-temperature, solvent-resistant epoxy coating carries a UL94V0 flammability rating which is suitable for almost any environment. *AZ style is provided with dual terminal wires F E AT U R E S A P P L I C AT I O N S • High Surge Energy • Non-Inductive • Small Size • Motor Drives • Power Supplies, UPS • Power Conversion • In-Rush Current Limiting S E R I E S S P E C I F I C AT I O N S P Impulse Resistance1 avg.2 Voltage3 Energy4 Series (ohms) (watts) (volts) (joule) AV 3.3 to 10K 2.0 1000 250 AW 4.7 to 15K 2.5 1500 400 AX 1.0 to 3.3K 3.5 1000 700 AY 2.2 to 6.8K 4.5 2000 1400 AZ 1.5 to 4.7K 5.5 2500 2800 1E12 Standard Values ±10%; 2Free Air 40°C Ambient; 3In Air; 4Single Impulse CHARACTERISTICS Tolerance ±10% Standard Operating Temp. -55°C to 150°C Range Derating 120 100 % Rated Power Resistance Element Bulk Ceramic Terminals Radial; 100% Sn solder coated radial (60/40 solder available upon request) Coating UL94V0, solvent resistant epoxy Derating Derates linearly from 100% @ 50°C to 0% @ 150°C Temperature Rise 100°C @ 100% rated power, 50°C ambient D H L Part No. 5911E 5910E Dim. (mm) D H L for Series Color 20 23 13 AX and AY White 25 26 15 AZ Black This saddle clip conforms to the configuration of Ohmite’s A Series resistor to provide secure mounting. Made of a durable thermoplastic polyester, the saddle clip is designed to secure the A Series in place while safely withstanding its operating temperatures. Use (2) saddle clips per resistor for extra stability. 60 40 20 0 0 20 40 60 80 100 120 140 160 Ambient Temp (°C) Surface Temperature Rise vs. Applied Power 120 Temperature Rise (°C) Mounting clip 80 100 80 60 40 20 0 0 20 40 60 80 % Rated Power 100 120 (continued) 52 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com A Series PulsEater® Ceramic Composition Available in E12 Ohmic values DIMENSIONS AV - AY AZ L P L D H S Term. wire avg.2 max. max. max. norm. gauge Weight Series (watts) (mm) (mm) (mm) (mm) (AWG) (g) L D H AW 2.5 20 13 22 17.5 20 5.4 AX 3.5 15 21 28 12.5 18 10 16.7mm 4.7mm ±0.7mm S AV 2.0 15 13 22 12.5 20 3.9 D S Offset crimp width is 2x terminal wire gauge 7.6mm AY 4.5 25 21 28 22.5 18 19 AZ 5.5 30 26 27 18 33 AZ series also available with crimps upon request O R D E R I N G I N F O R M AT I O N RoHS compliant A W 5 6 G K E 5.6 –––56GK 6.8 –––68GK b 8.2 –––82GK b 10 –––100K b b b b b 12 –––120K 15 –––150K b b b 18 –––180K 22 –––220K b b b b b 27 –––270K b Check product availability at www.ohmite.com 33 –––330K b b b 39 –––390K b b b 47 –––470K b b b 56 –––560K b b 68 –––680K b b 82 –––820K b 100 –––101K b b b b 120 –––121K 150 –––151K b b b 180 –––181K b = Standard values b b b b AY––– AZ––– AX––– Series AV––– Part No. Prefix G Suffix AW––– AY––– AZ––– AX––– Series AV––– Part No. Prefix G Suffix AW––– AY––– AZ––– AX––– AV––– AW––– Ohmic value AY––– AZ––– AX––– AV––– Series G 1.0 –––10GK b 1.2 –––12GK 1.5 –––15GK b 1.8 –––18GK 2.2 –––22GK b b 2.7 –––27GK 3.3 –––33GK b b b b 3.9 –––39GK b b 4.7 –––47GK b b b Part No. Prefix G Suffix G AW––– Series G Part No. Prefix G Suffix G Ohmic value Standard Values Ohmic value Tolerance Ohm Value K = 10% std. Example: 33G = 3.3 Ohms M = 20% 330 = 33 Ohms 331 = 330 Ohms Ohmic value Size 220 –––221K b b b 270 –––271K 330 –––331K b b b 470 –––471K b b b 560 –––561K 680 –––681K b b 820 –––821K b b 1000 –––102K b b b b b Non-standard values subject to a minimum handling charge per item. rev 5/22-1 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 53