BAB232025R0KE

BA Series Aluminum Cased Resistor Our Aluminum housed brake resistors are designed for high power and provide great stability. These resistors are constructed using wirewound on ceramic cores and isolated using a mica sheet for high dielectric properties. The aluminum house is filled with a high thermal conductivity material to ensure quick heat dissipation during continues applications. With the ability to have a thermal cut off switch embedded inside the aluminum housing, makes the BA series ideal for any safety application. F e at u r e s • Three extrusion forms available • Heatsinkable • Rugged design • Up to 1000 watts • Thermal cut-off available • Scalable, custom lengths available • Custom leads available A p p l i c at i o n s • Dynamic Braking • Motor Starting • Power Control S ERIE S S PECI F IC A TION S Series BA1160 BA2320 BA3266 *Free air rating Wattage* 500 700 1000 Resistance range 0.5Ω - 18KΩ 1Ω - 10KΩ 1Ω - 10KΩ Tolerance ±10% ±10% ±10% Length 160mm 320mm 266mm characteristics Overload 10 times rated wattage for 5 sec. Power Rating Free air; greater with heatsink Dielectric Withstanding Voltage 2.5KV, 1 min., 50/60 Hz Insulation Resistance ≥100MΩ Working Voltage 1000V not to exceed max power rating Max. Surface Temp. 385°C Wire UL listed 1199 PTFE 12 AWG (continued) 128 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com BA Series Aluminum Cased Resistor D I M EN S ION S BA1 and BB1 L1 L ø0.24" / 6.2mm H Ø 0.166" W 2.80" 71mm 3.15 ~ 3.31" 80 ~ 84mm BB1 style 4.33" 110mm BA1 style BA2 and BB2 L L1 ø 0.23" / 5.8mm (M5 X0.8) W Ø 0.166" 3.43" 87.1mm H 5.49" 139.5mm 5.49" 139.5mm BA2 style BB2 style BA3 and BB3 L 12ga., 600v H W L1 1.34" 34mm 1.61" 40.9mm BA3 style Type L* L1 W H 10" / 254mm 3.74" / 95mm 1.18" / 30mm BA2 12.6" / 320mm 31.5" / 800mm 3.94" / 100mm 1.18" / 30mm BA1 6.3" / 160mm BB1 6.3" / 160mm 3.74 " / 95mm BB2 12.6" / 320mm 3.94" / 100mm BB3 10.5" / 266mm 5" / 127mm BA3 10.5" / 266mm 12" / 304.8mm * Custom Lengths for Different Wattages 5" / 127mm 1.18" / 30mm 1.18" / 30mm 2.13" / 54.1mm 2.13" / 54.1mm OR D ERIN G IN F OR M A TION Thermal switch C = 160° B = 250° Standard part numbers Form 1 = extrusion Non-inductive BAC1160100RKNE Series B = block aluminum Termination Length A = wire leads (mm) B = solid terminals Resistance Ø 0.196" Tolerance K = ±10% RoHS Compliant BAB1160R500KE BAB11601R00KE BAB11602R00KE BAB116010R0KE BAB116025R0KE BAB232010R0KE BAB232025R0KE BAB232050R0KE BAB32666R00KE BAB326610R0KE BAB326615R0KE BAB326622R0KE BAB326650R0KE rev 7/21-1 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 129 BB3 style