FC4L16R050FER.

FCSL Series Metal Foil Current Sense Ohmite continues to add to its complement of Current Sense offerings with the FCSL Series. FCSL incorporates proven metal foil technology to produce the ultimate in a current sense resistor. FCSL features the effective combination of very low and stable TCRs (Temperature Coefficient of Resistance) available in a wide selection of very low ohmic values. Power ratings up to 5 Watts makes FCSL the ideal choice for your current sensing applications. F e at u r e s • Foil Construction ensures a very stable TCR (Temperature Coefficient of Resistance) • Designed for automatic insertion • Industry standard sizes • High heat resistant use • Low heat electromotive use • Color: white (top) and green (bottom) S e r i e s s p e c i f i c at i o n s TCR (ppm/°C) ±50 ±150 ±100 ±50 ±150 ±100 ±50 ±150 ±100 ±50 ±150 ±100 ±50 Weight (g) 0.004 0.036 Derating 100 Percent Rated Power Resistance Series Power Rating Range Tolerance FCSL05 0.2W 10mΩ, 20mΩ ±1% FCSL64 2.0W 1mΩ ±5% 2mΩ ±2% 3mΩ ~ 100mΩ ±1% FCSL76 3.0W 1mΩ ±5% 2mΩ ±2% 3mΩ ~ 100mΩ ±1% FCSL90 4.0W 1mΩ ±5% 2mΩ ±2% 3mΩ ~ 100mΩ ±1% FCSL110 5.0W 1mΩ ±5% 2mΩ ±2% 3mΩ ~ 100mΩ ±1% 0.050 80 60 40 20 0 -55 0.071 0 50 70 100 Ambient Temperature, °C 155 0.096 C h a r a c t e r i s t i cs Test Condition Maximum ∆R Max. temperature 70°C for rated power Operating -55°C ~ +155°C temperature range Rated voltage √(Rated power x Resistance value) V In-rush current* Rated current 10 msec ON, 60 sec OFF, 10 cycles* (see table at right) ±(1.0% +0.0005Ω) Rapid change of -55°C (30min.)/+155°C (30min.), 100 cy. temperature 1000 cycles, FCSL08 only ±(1.0% +0.0005Ω) ±(2.0%+0.0005Ω) Solderability 245°C ±5°C for 3 ±0.5 sec. *In-rush Current 1mΩ~10mΩ Rated In-rush Max. Series Wattage Power Current FCSL05 0.2W 1W 7A FCSL64 2W 225W 125A FCSL76 3W 325W 150A FCSL90 4W 440W 180A FCSL110 5W 600W 240A In-rush current = √(in-rush power/resistance value), or max. current, whichever is smaller Min. 90% coverage Endurance at 70°C 70°C ±3°C, Rated voltage 1.5h ON, 0.5h ±(1.0% +0.0005Ω) OFF, 1000h Resistance to 260°C ±5°C for 10 ±1 sec. soldering heat Moisture resistance 60°C ±2°C, 90~95% RH, Rated voltage 1.5h ON, 0.5h OFF, 1000h 6 12mΩ~100mΩ In-rush Max. Power Current 1W 7A 150W 70A 210W 80A 300W 100A 440W 120A ±(0.5% +0.0005Ω) ±(2.0% +0.0005Ω) 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com FCSL Series Metal Foil Current Sense Dimensions (in.±.008/mm ±0.20) Series L W 5 4 R010 1 2 3 Power Rating L W t FCSL05 0.2W 0.039/1.0 0.020/0.5 0.018/0.45 0.012/0.30 t 1. Alumina substrate 2. Resistive element (Ni-Cu-Mn alloy) 3. Electrode (Ni, Sn) 4. Protective coating (Epoxy resin) 5. Marking (Epoxy resin) Land Pattern FCSL64 2.0W 0.122/3.1 0.248/6.3 0.047/1.2 0.020/0.5 0.020/0.5 c FCSL76 3.0W 0.15/3.8 0.3/7.6 0.053/1.35 0.024/0.6 0.024/0.6 FCSL90 4.0W 0.177/4.5 0.35/8.9 0.063/1.6 0.028/0.7 0.028/0.7 0.5mm +0.2/-0.05 FCSL110 5.0W 0.197/5.0 0.43/11.0 0.071/1.8 0.031/0.8 0.031/0.8 FCSL05, FCSL08, FCSL110 have wrap-around terminals (mm) FCSL05 FCSL64 FCSL76 FCSL90 FCSL110 a b Value range 10Ω, 20Ω 1mΩ 2mΩ~100mΩ 1mΩ 2mΩ~100mΩ 1mΩ 2mΩ~100mΩ 1mΩ 2mΩ~100mΩ a 0.1 0.9 2.2 1.1 2.6 1.3 3.1 1.5 3.6 b c 1.6 0.6 4.2 6.6 4.2 6.6 4.6 7.8 4.6 7.8 5.1 9.2 5.1 9.2 5.6 11.2 5.6 11.2 Pa c k a g i n g S p e c i f i c at i o n s Tape (in./mm) T P0 D0 P2 Direction of feed E F B T2 FCSL05 A 0.026 B 0.045 W 0.315 E 0.069 F 0.138 P0 0.157 P1 0.079 P2 D0 0.059 D1 T 0.020 T2 (0.65 ±0.03) (1.15 ±0.03) (8.0 ±0.2) (1.75 ±0.1) (3.5 ±0.05) (4.0 ±0.1) (2.0 ±0.05) 0.135 0.261 0.472 0.069 T 0.217 0.157 0.157 0.079 (1.5 +0.1/-0) 0.059 0.059 (0.5 ±0.1) 0.008 T2 0.059 (3.43 ±0.2) (6.63 ±0.2) (12.0 ±0.3) (1.75 E±0.1)D 0 (5.5 ±0.05) (4.0 ±0.1) (4.0 ±0.1) F (2.0 ±0.05) (1.5 +0.1/-0) (1.5 +0.2/-0) (0.2 ±0.05) D1 (1.5 max.) A0 B0 W F E P0 P1 P2 D0 D1 T T2 Reel (in./mm) H N A E W2 W1 A P1 FCSL76 D1 FCSL64 FCSL90 0.163 (4.15 ±0.10) 0.191 0.313 (7.95 ±0.10) 0.368 P 0 0.630 (16.00 ±0.30) 0.630 Direction 0.295 (7.50P±0.10) 0.295 of feed 2 0.069 (1.75 ±0.10) 0.069 0.157 (4.00 ±0.10) 0.157 0.315 (8.00 ±0.10) 0.315 W 0.079 (2.00 ±0.10) 0.079 B 0.059 (1.50 ±0.10) 0.059 0.059 (1.50 ±0.10) 0.059 0.012 (0.30 ±0.05) 0.012 A 0.047 0.047 P1 (1.2 ±0.15) FCSL05 A 7.008 H 0.531 E 0.098 N 0.236 W1 0.331 W2 0.518 W FCSL64 (178±2) (13.5±0.1) (2.5±1) (60 +1/-0) (8.4+2/-0) (13.0 ±1.4) 7.087 0.512 0.079 0.236 0.518 0.669 (180 +0/-3) (13 ±0.2) (2.0 ±0.5) (60 +1/-0) (13.0 ±0.3) (17.0 ±1.4) FCSL110 (4.85 ±0.10) (9.35 ±0.10) (16.00 ±0.30) (7.50 ±0.10) (1.75 ±0.10) (4.00 ±0.10) (8.00 ±0.10) (2.00 ±0.10) (1.50 ±0.10) (1.50 ±0.10) (0.30 ±0.05) (1.2 ±0.15) 0.213 0.453 0.945 0.453 0.069 0.157 0.315 0.079 0.059 0.059 0.012 0.047 FCSL76/90 7.087 0.512 0.079 0.236 0.669 0.764 (180 +0/-3) (13 ±0.2) (2.0 ±0.5) (60 +1/-0) (17.0 ±0.3) (19.4 ±1.0) (5.40 ±0.10) (11.50 ±0.10) (24.00 ±0.30) (11.50 ±0.10) (1.75 ±0.10) (4.00 ±0.10) (8.00 ±0.10) (2.00 ±0.10) (1.50 ±0.10) (1.50 ±0.10) (0.30 ±0.05) (1.2 ±0.15) FCSL110 12.992 0.512 0.079 3.937 1.000 1.157 (330 ±2.0) (13 ±0.2) (2.0 ±0.5) (100 ±1.0) (25.4 ±1.0) (29.4 ±1.0) OR D ERING IN F ORMATION RoHS Compliant Series Package Size Ohms 64=6432=2W R005 = 0.005 76=7638=3W R050 = 0.050 90=9045=4W 110=11050=5W Tolerance Taping Code J = 5% R = 1,000 pc/reel G = 2% F = 1% Standard Part Numbers Ohms 0.0010 0.0020 0.0050 0.0100 0.0250 0.0500 2 Watts FCSL64R001JE FCSL64R002GE FCSL64R005FE FCSL64R010FE FCSL64R025FE FCSL64R050FE 3 Watts FCSL76R001JE FCSL76R002GE FCSL76R005FE FCSL76R010FE FCSL76R025FE FCSL76R050FE 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 4 Watts FCSL90R001JE FCSL90R002GE FCSL90R005FE FCSL90R010FE FCSL90R025FE FCSL90R050FE 7 5 Watts Tolerance TCR FCSL110R001JER ±5% ±150ppm/°C FCSL110R002GER ±2% ±100ppm/°C FCSL110R005FER ±1% ±50ppm/°C FCSL110R010FER ±1% ±50ppm/°C FCSL110R025FER ±1% ±50ppm/°C FCSL110R050FER ±1% ±50ppm/°C