FC4L90R015FER

FC4L Series FC4L Four Terminal Current Sense Metal Foil Construction F e at u r e s • Foil Construction ensures a very stable TCR (Temperature Coefficient of Resistance) • Designed for automatic insertion • Industry standard sizes • High heat resistant use • Low heat electromotive use • Color: white (top) and green (bottom) Ohmite offers the low TCR FC4L series in 0.25 watts up to 5 watts and values down to 1 milli-ohm. Great stability is achieved by employing a Ni-Cu-Mn resistive element. The FC4L series affords the user an added advantage of a built in 4-terminal design with 2 larger electrodes for current management and 2 smaller electrodes for current measurement. S ER I E S S P E C I F I C AT I O N S Power Resistance TCR Weight Series Rating Range Tol. (ppm/°C) (g) FC4L16 0.25W 5m, 10m, 20m, ±1% ±50 0.004 50mΩ ~ 100mΩ FC4L32 1W 1mΩ ±5% ±100 0.015 2mΩ ±2% ±100 3mΩ ±1% ±100 4mΩ ~ 500mΩ ±1% ±50 FC4L64 2W 1mΩ ±5% ±100 0.038 2mΩ ±2% ±100 3mΩ ±1% ±100 4m ~ 100mΩ ±1% ±50 10m ~ 50mΩ ±0.5% ±50 Power Resistance TCR Weight Series Rating Range Tol. (ppm/°C) (g) FC4L76 3W 1m-4mΩ ±1% ±100 0.062 5m-25mΩ ±0.5%, 1% ±50 FC4L90 4W 1m-4mΩ ±1% ±100 0.082 5m-25mΩ ±0.5%, 1% ±50 FC4L110 5W 1mΩ ±5% ±100 0.110 2mΩ ±2% ±50 3mΩ ~ 100mΩ ±1% ±50 10m ~ 50mΩ ±0.5% ±50 c h a r a c t e r is t ics Test Condition Maximum ∆R Max. temperature for rated power 70°C Operating temperature range -55°C ~ +155°C (FC4L16: -40°C ~ +125°C) Rated voltage √(Rated power x Resistance value) V Overload (FC4L16 only) Rated power x 1.5 for 5s In-rush current Rated current 10 msec ON, 60 sec OFF, 10 cycles. (see table next page) Rapid change of temperature -55°C (30min.)/+155°C (30min.), 100 cycles (FC4L16: 1000 cycles) Solderability 245°C ±5°C for 3 ±0.5 sec. Endurance 70°C ±3°C, Rated voltage 1.5h ON, 0.5h OFF, 1000h (FC4L76 & 90: 100°C) Resistance to soldering heat 260°C ±5°C for 10 ±1 sec. (FC4L76 & 90: 20 ±1) ±(0.5%+0.0005Ω) ±(1.0% +0.0005Ω) ±(1.0% +0.0005Ω) (FC4L16: ±(2.0%+0.0005Ω)) Min. 90% coverage (FC4L76 & 90: 95%) ±(1.0% +0.0005Ω) (FC4L76 & 90: ±(3.0%+0.5mΩ)) ±(1.0% +0.0005Ω) (FC4L16: ±0.5%) (FC4L76 & 90: No evidence of mechanical damage) Moisture resistance 60°C ±2°C, 90~95% RH, Rated voltage 1.5h ON, 0.5h OFF, 1,000h ±(2.0% +0.0005Ω) (76 & 90: 85 ±2°C, 85±5%RH, 10% Rated power, 1,000h) (FC4L16: ±1.0%) (FC4L76 & 90: ±(3% +0.0005Ω)) 8 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com FC4L Series FC4L Four Terminal Current Sense Metal Foil Construction c h a r a c t e r is t ics In-rush current Resistance Range In-rush Max. Power Current FC4L16 0.25 watt 5m, 10mΩ 2.5W 5A FC4L64 2 watt 1mΩ~9mΩ 100W 10mΩ~100mΩ 50W 85A 35A FC4L32 1 watt 1mΩ~9mΩ 25W 45A 10mΩ~500mΩ 12.5W 24A FC4L76 3 watt 1mΩ~9mΩ 110W 10mΩ~***mΩ 55W FC4L90 4 watt 1mΩ~9mΩ 120W 10mΩ~***mΩ 60W FC4L110 5 watt 1mΩ~50mΩ 90A 40A For lead free soldering (Sn-Ag-Cu solder) Preheating: 130° ~ 180° 60s ~ 90s Heating: Over 220° 30s ~ 90s Peak: 240° ~ 260° Max. 10s Max. number of reflow: 2 80 Others 60 40 20 0 -55 95A 45A FC4L16 300 0 50 70 100 125 155 Ambient Temperature, °C Temperature °C Power Rating Recommended Reflow Temperature Profile 100 Percent Rated Power Series Derating 100W 100A In-rush current = √(in-rush power/resistance value), or max. current, whichever is smaller Peak 240 ~ 260℃ Max. 10s 250 200 Heating 150 Preheating 100 Over 220℃ 30s ~ 90s 130 ~ 180℃ 60 ~ 90 sec. 50 Time (sec.) DIMENSIONS 4 t Land Pattern 1. Alumina substrate 2. Resistive element (Ni-Cu-Mn alloy)* d 3. Electrode (Ni, Sn)* 4. Protective coating (Epoxy resin) 5. Marking (Epoxy c resin): wider mark b indicates “V” term. 3 5 Rating a 2 “V” term. L R010 1 “I” term. W c d e a b *Dependent on size and value L W (in.±.008/mm ±0.20) a (in./mm) b mm ±0.15 c mm ±0.1 FC4L16 0.25 watt 0.063 / 1.60 0.031 / 0.8 0.010 / 0.26 0.30 ±.2 0.3 ±.2 FC4L64 2 watt 0.251 / 6.40 0.126 / 3.2 0.020 / 0.5 0.7 0.5 FC4L90 4 watt 0.35 / 9.00 ±0.3mm 0.18 / 4.5 ±0.3mm FC4L32 1 watt FC4L76 3 watt FC4L110 5 watt 0.126 / 3.20 0.30 / 7.60 ±0.3mm 0.433 / 11.0 0.063 / 1.6 0.014 / 0.35 0.35 0.2 d mm ±0.15 2.6 0.5 +.2/-.05 7.25 ±0.3mm 0.60 ±.20 0.75 ±0.2mm 0.60 ±0.2mm 6.15 ±0.3mm 0.197 / 5.0 0.028 / 0.7 1.4 1.1 8.5 0.75 ±0.2mm 0.5 +.2/-.05 5.2 0.02 / 0.55 ±0.2mm 0.90 ±0.2mm (mm) 1.0 ±.2 0.5 +.2/-.05 0.15 / 3.8 ±0.3mm 0.03 / 0.65 ±0.2mm t mm a b FC4L16 0.25 1.2 0.40 0.30 1.2 FC4L64 2.0 4.4 0.7 5.4 FC4L32 0.60 ±.20 FC4L76 FC4L90 0.5 +.2/-.05 0.4 2.7 c 0.35 d 0.3 0.5 e 2.7 2.4 4.80 0.95 0.45 6.60 2.8 5.60 1.10 0.55 7.80 FC4L110 3.2 5.6 1.6 1.1 8.7 P a c k a g in g S p e cific a t ions Reel A H N A H E N FC4L16 0.512 (13 ±0.2) 0.079 (2.0 ±0.5) 2.362 (60 +1/-0) W1 0.354 (9.0 ±0.3) E W2 W1 FC4L32 & 64 FC4L76 & 90 FC4L110 7.087 (180 +0/-3) 7.087 (180 +0/-3) 7.087 (180 +1.0/-3.0) 7.087 (180 ±2.0) 0.512 (13 ±0.2) 0.079 (2.0 ±0.5) 2.362 (60 +1/-0) 0.512 (13 ±0.2) 0.079 (2.0 ±0.5) 2.362 (60 +1/-0) 0.512 (13.0 ±0.3) 0.827 (21 ±0.8) W2 0.512 (13.0 ±0.3) 0.669 (17.0 ±1.4) 0.669 (17.0 ±.3) 0.512 (13 ±0.2) 0.079 (2.0 ±0.5) 0.827 (21 ±0.8) 1.000 (25.4 ±1.0) 1.157 (29.4 ±1.0) (continued) 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 9 FC4L Series T FC4L Four Terminal Current Sense E Metal Foil Construction F P0 D0 Direction of feed P2 B W P a c k a g in g S p e cific a t ions T2 (continued) D1 Tape inches (mm) T E A P1 P0 D0 P2 Direction of feed F B T2 D1 W A P1 FC4L16 FC4L32 FC4L64 FC4L76 FC4L90 FC4L110 A 0.037 (0.95±0.05) 0.075 (1.90 ±0.1) 0.135 (3.43 ±0.2) 0.163 (4.15 ±0.20) 0.191 (4.85 ±0.20) 0.213 (5.40 ±0.10) B W F E P0 P1 P2 D0 D1 T T2 0.073 (1.85±0.05) 0.315 (8.00±0.10) 0.138 (3.50±0.05) 0.069 (1.75±0.10) 0.157 (4.00±0.10) 0.157 (4.00±0.10) 0.079 (2.00±0.05) 0.138 (3.50 ±0.1) 0.315 (8.00 ±0.2) 0.138 (3.50 ±0.05) 0.069 (1.75 ±0.1) 0.157 (4.0 ±0.1) 0.157 (4.0 ±0.1) 0.079 (2.0 ±0.05) 0.261 (6.63 ±0.2) 0.472 (12.0 ±0.3) 0.069 (1.75 ±0.1) 0.217 (5.5 ±0.05) 0.157 (4.0 ±0.1) 0.157 (4.0 ±0.1) 0.079 (2.0 ±0.05) 0.313 (7.95 ±0.20) 0.368 (9.35 ±0.20) 0.453 (11.50 ±0.10) 0.630 (16.00 ±0.30) 0.630 (16.00 ±0.30) 0.945 (24.00 ±0.30) 0.295 (7.50 ±0.10) 0.069 (1.75 ±0.10) 0.157 (4.00 ±0.10) 0.315 (8.00 ±0.10) 0.079 (2.00 ±0.10) 0.295 (7.50 ±0.10) 0.069 (1.75 ±0.10) 0.157 (4.00 ±0.10) 0.315 (8.00 ±0.10) 0.079 (2.00 ±0.10) 0.069 (1.75 ±0.10) 0.453 (11.50 ±0.10) 0.157 (4.00 ±0.10) 0.315 (8.00 ±0.10) 0.079 (2.00 ±0.10) 0.059 (1.50+0.10/-0) 0.059 (1.50 +0.1/-0) 0.059 (1.5 +0.1/-0) 0.059 (1.50 ±0.10) 0.059 (1.50 ±0.10) 0.059 (1.50 ±0.10) 0.008 (0.20±0.05) 0.012 (0.30 ±0.10) 0.012 (0.30 ±0.10) 0.012 (0.30 ±0.05) 0.024 (0.60±0.05) 0.022 (0.55±0.05) 0.039 (1.00 +0.2/-0) 0.059 (1.5 +0.2/-0) 0.008 (0.20 ±0.05) 0.039 (1.00 ±0.2) 0.008 (0.20 ±0.05) 0.059 (1.5) max. 0.063 (1.60) max. 0.063 (1.60) max. 0.059 (1.50 ±0.10) 0.047 (1.2 ±0.15) O R D ER I N G I N F O R M AT I O N Ohms R005=0.005Ω R050=0.050Ω RoHS Compliant FC4L110R005FER Series TCR* (ppm) W = 25 V = 50 L = per chart above Package Size 110=11050=5W 64=6432=2W 32=3216=1W 16=1608=0.25W Tolerance Taping Code 1,000 pc/reel J = 5% FC4L16: 5,000 pc/reel G = 2% F = 1% D = 0.5% *FC4L32 and FC4L64 values over 0.100Ω only Standard Part Numbers for FC4L series 0.25 watt 1 watt 2 watt 3 watt 4 watt FC4L76R001GER FC4L90R001GER FC4L32R001JER FC4L64R001JER FC4L76R002FER FC4L90R002FER FC4L32R002GER FC4L64R002GER FC4L32R003FER FC4L64R003FER FC4L76R003FER FC4L90R003FER FC4L16R005FER FC4L32R005FER FC4L64R005FER FC4L76R005FER FC4L90R005FER FC4L64R010DER FC4L16R010FER FC4L32R010FER FC4L64R010FER FC4L76R010FER FC4L90R010FER FC4L64R015DER FC4L16R015FER FC4L32R015FER FC4L64R015FER FC4L76R015FER FC4L90R015FER FC4L64R020DER FC4L16R020FER FC4L32R020FER FC4L64R020FER FC4L76R020FER FC4L90R020FER FC4L64R025DER FC4L16R025FER FC4L32R025FER FC4L64R025FER FC4L76R025FER FC4L90R025FER FC4L64R030DER FC4L16R030FER FC4L32R030FER FC4L64R030FER FC4L64R050DER FC4L16R050FER FC4L32R050FER FC4L64R050FER FC4L16R100FER FC4L32R100FER FC4L64R100FER rev 8/19-1 10 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 5 watt FC4L110R001JER FC4L110R002GER FC4L110R003FER FC4L110R005FER FC4L110R010DER FC4L110R010FER FC4L110R015DER FC4L110R015FER FC4L110R020DER FC4L110R020FER FC4L110R025DER FC4L110R025FER FC4L110R030DER FC4L110R030FER FC4L110R050DER FC4L110R050FER FC4L110R100FER