FC4TR100DER-DEL

FC4T Series Metal Foil Low Value Chip The FC4T chip features four terminals, also known as a “Kelvin” configuration. This configuration enables current to be applied through two opposite terminals and a sensing voltage to be measured across the other two terminals, eliminating the resistance and temperature coefficient of the terminals for a more accurate current measurement. Ohmite’s proprietary Metal Foil technology offers an excellent Temperature Coefficient of Resistance (TCR) even for very low resistance values ( down to 50ppm). S e r i e s S p e c i f i c at i o n s Pkg. Series Size FC4T 1206 Power Resistance Rating Range TCR (W @70°C) (Ω) (ppm/°C) 0.5W 0.005-0.100 50ppm Tolerance 0.5%, 1% c h a r a ct e r i st i cs Resistance Tolerance 0.5% and 1% standard Temperature Coefficient within ±50ppm Coating Material Epoxy resin Terminals Cu/Ni/Sn Max. Current √(Max. power÷ Resistance value) Res. of Electrodes 95% Resistance to Solder Heat ±(1.0%+0.5mΩ) Mechanical Shock ±(1.0%+0.5mΩ) Vtest=Vmax; T=60 ±2ºC; RH=95%; t= 90min ON, 30min OFF, 1000h; IEC60115-1 4.25 (60℃, 95%RH) -55ºC 30min. / R.T. 3min. / +150ºC 30min. / R.T. 3min ], 100cycles; IEC60115-1 4.19 Vtest=Vmax; T=70 ±2ºC; t=90min ON; IEC60115-1 4.25 Dip into solder at T=245 ±5ºC, t=3 ±0.5sec.; IEC60115-1 4.17 Through Reflow T=275 ±5ºC, t=20 ±1sec.; IEC60115-1 4.18 a=100G, t=11ms, 5 times shock; IEC60115-1 4.21 Substrate Bending ±(1.0%+0.5mΩ) Span between fulcrums 90mm; bend width 2mm; test board glass-epoxy; Thickness=1.6mm; IEC60115-1 4.33 dimensions (mm ±0.2) L f t b c d e W Part L FC4T 1.6 W a b c t d e f 3.2 0.55 0.65 0.3 0.6 0.75 0.30 1.30 a Tape and Reel T K P D0 Direction of feed P2 E F D1 T1 Part FC4T W P 8.00 ±0.30 4.00 ±0.10 B N 178 ±5 60 ±2 W1 9 ±1 A P A N A W W1 P2 A B D0 F E T T1 K 2.00 ±0.10 2.05 ±0.20 3.65 ±0.20 1.50 ±0.10 3.50 ±0.10 1.75 ±0.10 0.20 ±0.10 Max. 0.1 0.85 ±0.20 ORDERIN G IN F ORMA T ION RoHS Compliant FC4TR010DER Series Ohms Tolerance Tape & Reel F= 1% 5000/reel D = 0.5% Standard Part Numbers 1% FC4TR005FER FC4TR010FER FC4TR015FER FC4TR050FER FC4TR100FER 0.5% FC4TR010DER FC4TR015DER FC4TR050DER FC4TR100DER rev 11/17-1 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 13