FCSL90R010DER

FCSL Series Metal Foil Current Sense Ohmite continues to add to its complement of Current Sense offerings with the FCSL Series. FCSL incorporates proven metal foil technology to produce the ultimate in a current sense resistor. FCSL features the effective combination of very low and stable TCRs (Temperature Coefficient of Resistance) available in a wide selection of very low ohmic values. Power ratings up to 10 Watts makes FCSL the ideal choice for your current sensing applications. F e at u r e s • Foil Construction ensures a very stable TCR (Temperature Coefficient of Resistance) • Designed for automatic insertion • Industry standard sizes • High heat resistant use • Low heat electromotive use • Color: white (top) and green (bottom) S e r i e s s p e c i f i c at i o n s Power Resistance TCR Weight Series Rating Range (mΩ) Tol. (ppm/°C) (g) FCSL20 1.0W 2m ±5% ±100 0.025 3m ~ 4m ±2% ±100 5m ~ 9m ±1% ±100 10m ~ 50mΩ ±1% ±50 FCSL32 1.5W 1m ~ 2m ±5% ±100 0.030 3m ~ 4m ±2% ±100 5m ~ 9m ±1% ±100 10m ~ 50mΩ ±1% ±50 FCSL64 2.0W 1m ±5% ±150 0.036 2m ±2% ±100 3m ~ 100m ±1% ±50 5m ~ 50mΩ ±0.5% ±50 FCSL76 3.0W 1m ±5% ±150 0.050 2m ±2% ±100 3m ~ 100m ±1% ±50 5m ~ 50mΩ ±0.5% ±50 FCSL90 4.0W 1m ±5% ±150 0.071 2m ±2% ±100 3m ~ 100m ±1% ±50 5m ~ 50mΩ ±0.5% ±50 FCSL110 5.0W 1m ±5% ±150 0.096 2m ±2% ±100 3m ~ 100m ±1% ±50 5 m ~ 50mΩ ±0.5% ±50 FCSL150 10.0W 1m ±5% ±100 0.316 2m ±2% ±100 3m ~ 100m ±1% ±100 (>9m:±50) *In-rush Current Rated Series Wattage FCSL20 1W FCSL32 1.5W FCSL64 2W FCSL76 3W FCSL90 4W FCSL110 5W FCSL150 10W 6 1mΩ~10mΩ 12mΩ~100mΩ In-rush Max. In-rush Max. Power Current Power Current 20W 45A 14W 20A 56W 64A 36W 35A 225W 125A 150W 70A 325W 150A 210W 80A 440W 180A 300W 100A 600W 240A 440W 120A 700W 270A 470W 140A C h a r a c t e r i s t i cs Test Condition Overload (10W) Rated power x1.5, 5s Maximum ∆R ±(1.0%+0.0005Ω) Max. temperature 70°C for rated power (10W: 100°C) Operating -55°C ~ +155°C temp. range Rated voltage √(Rated power x Resistance value) V In-rush current* Rated current 10 msec ON, 60 sec OFF, 10 cycles* (see table below) ±(1.0% +0.0005Ω) Rapid change of -55°C (30min.)/+155°C temperature (30min.), 100 cy. -55℃ (30min), Room temp (3min), +155℃ (30min), Room temp (3min), 100 cy., FCSL20 & 32 only -40℃ (30min), Room temp (3min), +125℃ (30min), Room temp (3min), 1000 cy., FCSL150 only ±(1.0% +0.0005Ω) Solderability 245°C ±5°C for 3 ±0.5 sec. ±(1.0% +0.0005Ω) ±0.6% Min. 90% coverage (FCSL20-32: 95%) Endurance at 70°C ±3°C, Rated voltage 70°C 1.5h ON, 0.5h OFF, 1000h ±(1.0% +0.0005Ω) (FCSL20-32: ±(2.0% +0.0005Ω)) Resistance to 260°C ±5°C for 10 ±1 sec. soldering heat ±(0.5% +0.0005Ω) (FCSL20-32: No evid. of mech. damage) Moisture 60°C ±2°C, 90~95% RH, resistance Rated voltage 1.5h ON, 0.5h OFF, 1000h ±(2.0% +0.0005Ω) ±(1.0%+0.0005Ω) Terminal strength 10W: Bending width: 2mm for 10s±1s, Glass epoxy substrate 1.6mm thick In-rush current = √(in-rush power/resistance value), or max. current, whichever is smaller 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com FCSL Series Metal Foil Current Sense C h a r a c t e r i s t i cs Recommended Reflow Temperature Profile Derating For lead free soldering (Sn-Ag-Cu solder) FCSL20-32 FCSL64-110 Preheating: 150° ~ 200° 60s ~ 180s 130° ~ 180° 60s ~ 90s Heating: Over 217° 60s ~ 150s Over 220° 30s ~ 90s Peak: 260° Max. 30s 240° ~ 260° Max. 10s Max. number of reflow: 2 80 60 40 20 0 -55 0 50 70 100 Ambient Temperature, °C 300 155 Peak 250 300 260℃ Max. 30s Temperature °C (10W) Temperature °C Percent Rated Power 100 FCSL20-32 200 Reflow 150 Preheating 100 Over 217℃ 60s ~ 150s 150 ~ 200℃ 60 ~ 180 sec. 50 Peak 240 ~ 260℃ Max. 10s 250 FCSL64-150 200 Heating 150 100 130 ~ 180℃ 60 ~ 90 sec. 50 Time (sec.) Over 220℃ 30s ~ 90s Preheating Time (sec.) Dimensions (in.±.008/mm ±0.20) L W 5 FCSL20 2 FCSL32 4 R010 1 Series Power Rating L W a FCSL76 3 0.049/1.25 0.079/2.0 2.0W 0.122/3.1 0.248/6.3 3.0W FCSL90 FCSL110 FCSL150 t 1.0W 1.5W FCSL64 4.0W 5.0W 10W 0.063/1.6 0.15/3.8 0.177/4.5 0.197/5.0 0.295/7.5 *5mΩ and higher: 0.010"/0.25mm FCSL110 has wraparound terminals 1mΩ 0.126/3.2 0.3/7.6 0.35/8.9 0.43/11.0 0.591/15.0 a 2mΩ and higher t 0.011/0.28 0.024/0.60 0.020/0.50 0.020/0.50 0.016/0.40 0.014/0.35* 0.047/1.20 0.053/1.35 0.063/1.60 0.063/1.60 0.043/1.10 0.024/0.60 0.028/0.70 0.031/0.80 0.024/0.60 0.020/0.50 0.020/0.50 0.020/0.50 Land Pattern 1. Alumina substrate 4. Protective coating (Epoxy resin) 2. Resistive element (Ni-Cu-Mn alloy) 5. Marking (Epoxy resin) 3. Electrode (Ni, Sn) c a b (mm) FCSL20 FCSL32 FCSL64 FCSL76 FCSL90 FCSL110 FCSL150 Value range 2mΩ~50mΩ 1mΩ~4mΩ 5mΩ~50mΩ 1mΩ 2mΩ~100mΩ 1mΩ 2mΩ~100mΩ 1mΩ 2mΩ~100mΩ 1mΩ 2mΩ~100mΩ 1mΩ 2mΩ~100mΩ a 0.50 0.50 0.60 0.9 2.2 1.1 2.6 1.3 3.1 1.5 3.6 2.0 5.0 b 2.80 3.20 3.20 4.2 4.2 4.6 4.6 5.1 5.1 5.6 5.6 8.4 8.4 c 2.30 3.68 3.68 6.6 6.6 7.8 7.8 9.2 9.2 11.2 11.2 15.2 15.2 Pa c k a g i n g S p e c i f i c at i o n s Reel (in./mm) H N A E W2 W1 FCSL20/32 A 7.087 H 0.512 E 0.079 N 0.236 W1 0.354 W2 0.449 (180 +0/-3) (13 ±0.2) (2.0 ±0.5) (60 +1/-0) (9.0 ±0.3) (11.4 ±1.0) FCSL64 FCSL76/90 FCSL110 FCSL150 7.087 0.512 0.079 0.236 0.518 0.669 7.087 0.512 0.079 0.236 0.669 0.764 7.087 0.512 0.079 0.827 1.000 1.157 12.992 (330±2.0) 0.512 (13±0.2) 0.079 (2.0 ±0.5) 3.937 (100±1.0) 1.000 (25.4 ±1.0) 1.157 (29.4 ±1.0) (180 +0/-3) (13 ±0.2) (2.0 ±0.5) (60 +1/-0) (13.0 ±0.3) (17.0 ±1.4) (180 +0/-3) (13 ±0.2) (2.0 ±0.5) (60 +1/-0) (17.0 ±0.3) (19.4 ±1.0) (180 ±2.0) (13 ±0.2) (2.0 ±0.5) (21 ±0.8) (25.4 ±1.0) (29.4 ±1.0) (continued) 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 7 FCSL Series Metal Foil Current Sense P a c k a g i n g S p e c i f i c a t i o n s ( c o n t. ) Tape (in./mm) T ØD0 T E Paper tape T2 0.066 0.094 0.315 0.069 0.138 0.157 0.157 0.079 0.059 (1.68 (2.38 (8.00 (1.75 (3.50 (4.00 (4.00 (2.00 (1.50 ±0.20) ±0.20) ±0.30) ±0.10) ±0.10) ±0.10) ±0.10) ±0.10) ±0.10) 0.039 (1.00 max.) 0.055 (1.40 max.) B 0.081 0.144 0.315 0.069 0.138 0.157 0.157 0.079 0.059 P1 P2 P0 FCSL64 0.135 0.261 0.472 0.069 0.217 0.157 0.157 0.079 0.059 0.059 0.008 0.059 (3.43 ±0.2)A (6.63 ±0.2)B (12.0 ±0.3)W (1.75 ±0.1)F (5.5 ±0.05)E (4.0 ±0.1) P0 (4.0 ±0.1) P1 (2.0 ±0.05)P2 D0 (1.5 +0.1/-0) D1 (1.5 +0.2/-0) (0.2 ±0.05)T (1.5 max.)T2 FCSL76 0.163 0.313 0.630 0.295 0.069 0.157 0.315 0.079 0.059 0.059 0.012 0.047 FCSL90 (4.15 ±0.10) (7.95 ±0.10) (16.00 ±0.30) (7.50 ±0.10) (1.75 ±0.10) (4.00 ±0.10) (8.00 ±0.10) (2.00 ±0.10) (1.50 ±0.10) (1.50 ±0.10) (0.30 ±0.05) (1.2 ±0.15) 0.191 0.368 0.630 0.295 0.069 0.157 0.315 0.079 0.059 0.059 0.012 0.047 FCSL110 (4.85 ±0.10) (9.35 ±0.10) (16.00 ±0.30) (7.50 ±0.10) (1.7 ±0.10) (4.00 ±0.10) (8.00 ±0.10) (2.00 ±0.10) (1.50 ±0.10) (1.50 ±0.10) (0.30 ±0.05) (1.2 ±0.15) 0.213 0.453 0.945 0.453 0.069 0.157 0.315 0.079 0.059 0.059 0.012 0.047 FCSL150 (5.40 ±0.10) (11.50 ±0.10) (24.00 ±0.30) (11.50 ±0.10) (1.75 ±0.10) (4.00 ±0.10) (8.00 ±0.10) (2.00 ±0.10) (1.50 ±0.10) (1.50 ±0.10) (0.30 ±0.05) (1.2 ±0.15) 0.327 0.614 0.945 0.069 0.453 0.157 0.472 0.079 0.059 0.059 0.012 0.091 OR D ERING IN F ORMATION RoHS Compliant Series Package Size Ohms 20=2012=1W R005 = 0.005Ω 32=3216=1.5W R050 = 0.050Ω 64=6432=2W 76=7638=3W 90=9045=4W 110=11050=5W 150=15075=10W Tolerance Taping Code J = 5% 1,000 pc/reel G = 2% (10W: 500pc/reel) F = 1% D = 0.5% Standard Part Numbers 4 Watts Ohms 1.0 Watt 1.5 Watts 2 Watts 3 Watts 0.0010 FCSL64R001JE FCSL76R001JE FCSL90R001JE FCSL110R001JE FCSL150R001JE 0.0020 10 Watt FCSL64R002GE FCSL76R002GE FCSL90R002GE FCSL110R002GE FCSL150R002GE FCSL32R003GE 0.0050 FCSL20R005FE FCSL32R005FE FCSL64R005FE FCSL64R005DE FCSL76R005FE FCSL76R005DE FCSL90R005FE FCSL110R005FE FCSL150R005FE FCSL90R005DE FCSL110R005DE 0.0100 FCSL20R010FE FCSL32R010FE FCSL64R010FE FCSL64R010DE FCSL76R010FE FCSL76R010DE FCSL90R010FE FCSL110R010FE FCSL150R010FE FCSL90R010DE FCSL110R010DE 0.0150 FCSL20R015FE FCSL32R015FE FCSL64R015FE FCSL64R015DE FCSL76R015FE FCSL76R015DE FCSL90R015FE FCSL110R015FE FCSL150R015FE FCSL90R015DE FCSL110R015DE 0.0200 FCSL20R020FE FCSL32R020FE FCSL64R020FE FCSL64R020DE FCSL76R020FE FCSL76R020DE FCSL90R020FE FCSL110R020FE FCSL150R020FE FCSL90R020DE FCSL110R020DE 0.0250 FCSL20R025FE FCSL32R025FE FCSL64R025FE FCSL64R025DE FCSL76R025FE FCSL76R025DE FCSL90R025FE FCSL110R025FE FCSL150R025FE FCSL90R025DE FCSL110R025DE 0.0300 FCSL20R030FE FCSL32R030FE FCSL64R030FE FCSL64R030DE FCSL76R030FE FCSL76R030DE FCSL90R030FE FCSL110R030FE FCSL150R030FE FCSL90R030DE FCSL110R030DE 0.0500 FCSL20R050FE FCSL32R050FE FCSL64R050FE FCSL64R050DE FCSL76R050FE FCSL76R050DE FCSL90R050FE FCSL110R050FE FCSL150R050FE FCSL90R050DE FCSL110R050DE FCSL64R100FE FCSL76R100FE FCSL90R100FE FCSL110R100FE FCSL150R100FE rev 8/18-5 8 5 Watts 0.0030 FCSL20R003GE 0.1000 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com W ØD1. direction of unreeling ±0.20) ±0.20) ±0.30) ±0.10) ±0.10) ±0.10) ±0.10) ±0.10) ±0.10) 0.039 (1.00 max.) 0.055 (1.40 max.) (2.05 (3.65 (8.00 (1.75 (3.50 (4.00 (4.00 (2.00 (1.50 A Resistor T2 FCSL20 FCSL32 A B W E F P0 P1 P2 D0 D1 T T2 F Embossed plastic tape (8.30 ±0.1) (15.60 ±0.1) (24.00 ±0.2) (1.75 ±0.1) (11.50 ±0.1) (4.00 ±0.1) (12.00 ±0.1) (2.00 ±0.1) (1.50 +0.05/-0) (1.50 +0.05/-0) (0.30 ±0.05) (2.3 ±0.1)