FSP01CE

FSP Series Force Sensing Potentiometer S E R I E S S P E C I F I C AT I O N S Series Active area Sensor overall width Sensor overall length FSP01CE 13.00 x 100.00mm 20.00 x 109.00mm 184.00mm FSP02CE 13.00 x 50.00mm 20.00 x 59.00mm 134.00mm FSP03CE ø16.00mm in / ø36.00mm out ø46.00mm 95.80mm Tail length Tail width 75.00mm 10.00mm 75.00mm 10.00mm 49.80mm 11.00mm c h aracteristics Thickness 0.375mm (inc. 0.05mm adhesive) Mode Thru Trace width 0.25mm Trace pitch 0.50mm Spacer height 0.125mm Characteristic Description Actuation force Force to reach 10MΩ, Average of 100 samples Force range linear region of log/log, Higher forces can be achieved with custom sensor and actuation methods Long term drift 1kg for 48hrs, Per log time Single part repeatability 100 actuations of 1kg, 1 standard deviation/mean Part to part repeatability 100 sensors same batch, 1 std. deviation/mean Value < 20g Up to 1kg < 2% 5% ±10% Low temp. storage –20°C for 250hrs, Avg. change in resistance of 5 sensors 2% High temp. storage +85°C for 250hrs, Avg. change in resistance of 5 sensors 9% High humidity storage +85°C/85%RH for 250hrs, Avg. change in resistance of 5 sensors Lifecycle durability (10M) 1kg force at 3Hz, Avg. change in resistance of 4 sensors Hysteresis 100 actuations of 1kg, Avg. change in resistance of 100 samples Operational temp. range 100 cycles at 0.5kg, Linear resistance Resistance between pins 1 & 2, Average of 100 parts same batch 10% 4% 5% –20 to +60°C FSP01CE: 1.25k, ±15% FSP02CE: 0.76k, ±15% FSP03CE: ±15% Note: All values typical, and quoted at 10N applied force unless otherwise stated. Force dependant on actuation interface, mechanics, touch location, and measurement electronics. 10 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com FSP Series Force Sensing Potentiometer d i m ensions Interconnect C Nicomatic 14106-12 and OF03 FSP01CE 20.00 x 109.00 13.00 x 100.00 Active area 2.00 x 98.00 Dead front window 10.00 6.00 109.00 Interconnect C Nicomatic 14106-12 and OF03 FSP02CE 20.00 x 59.00 13.00 x 50.00 Active area 2.00 x 48.00 Dead front window 75.00 10.00 6.00 59.00 75.00 FSP03CE Interconnect C Nicomatic 14106-12 and OF04 11.00 ø46.00 ø12.00 Active area ø36.00 Dead front window ø42.50 6.00 1.25 8.00 10.00 O r d erin g infor m ation Terminal type A = Bare tail B = Solder tab C = Connector housing (female) D, E… = Assigned sequentially for custom designs FSP03CXE RoHS Compliant Series FSP Format Modifier Force sensing 01 = Short strip for custom potentiometer 02 = Long strip designs (optional) 03 = Round wheel 04, 05... = Assigned sequentially for custom designs rev 5/18-2 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 11