L25J50RE-MT1

270 Series Vitreous Enamel Power F E AT U R E S Select 270 Type fixed resistors for applications requiring wattage ratings from 12 to 1000 watts. The 270 Type resistors are equipped with lug terminals suitable for soldering or sturdy bolt connection. When secure mounting is required, the hollow core of these resistors permit fastening with spring-type brackets, thru bolts or thru bolts with slotted-steel brackets. Suitable for rugged applications, the 270 Type resistors feature all-welded construction and durable lead free vitreous enamel coating. Mounting brackets not included with resistors. • Terminals suitable for soldering or bolt connection • High wattage applications • Rugged lead free vitreous enamel coating • Flame resistant coating • All-welded construction • RoHS compliant available • “Fast on” option – see terminal 538, https://www.ohmite.com/assets/docs/terminals.pdf S E R I E S S P E C I F I C AT I O N S Series L12 L25 L50 L100 L175 L225 L500 L1000 Wattage 12 25 50 100 175 225 500 1000 Ohms 0.1-51K 0.15-100K 0.38-260K 0.23-101K 0.13-101K 0.16-129K 0.38-218K 0.69-392K Core Code D K K M P P S S Max. Voltage* 565 625 1625 2845 3595 4595 4970 8900 Std. Terminal 57 40 40 40 46 46 45 45 Non-Inductive versions available; Other sizes available; Also available in low cost Centohm or Silicone coating; Consult Ohmite. * Maximum Voltage is based on Ohm’s Law [V=√P*R] as limited by the resistance value of specified product or the voltage limit stated, whichever is lower. CHARACTERISTICS Coating Lead free vitreous enamel. Large models (500 watts and up) are supplied in Silicone Ceramic. Also available in low-cost Centohm coating; Consult factory. Core Tubular ceramic. Terminals Solder coated radial lug. RoHS solder composition is 96% Sn, 3.5% Ag, 0.5% Cu Derating Linearly from 100% @ +25°C to 0% @ +350°C. Tolerance ±5% 1Ω and over (J); ±10% under 1Ω (K) Power rating Based on 25°C free air rating. Overload 10 times rated wattage for 5 seconds. Temperature coefficient 1 to 20Ω: ±400 ppm/°C; Above 20Ω: ±260 ppm/°C Dielectric withstanding voltage 1000 VAC: 12 to 100 watt rating. 3000 VAC: 175 to 225 watt rating (Measured from terminal to mounting bracket) Max. amps use the formula √P/R Power limitations for When resistance exceeds the resistance values listed, derate the Power Rating by 25% to high resistance values improve reliability. No power derating necessary for ratings higher than 100W. Power Resistance rating value 12W 3,900Ω 25W 12,000Ω 50W 35,000Ω 100W 75,000Ω Mounting Hardware see https://www.ohmite.com/assets/docs/hardware_resistor.pdf (continued) 112 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 270 Series Vitreous Enamel Power DIMENSIONS in./mm Series Wattage L12 12 L25 C D L50 50 D C 0.313 / 7.94 0.188 / 4.76 2.0 / 50.8 4.0 / 101.6 0.562 / 14.3 Core Code* Std. Term.** 0.313 / 7.94 0.562 / 14.3 0.313 / 7.94 D 40 40 K 100 6.5 / 165.1 0.750 / 19.1 0.50 / 12.7 M L225 225 10.5 / 266.7 1.125 / 28.6 0.75 / 19.1 P 1000 20.0 / 508.0 L500 L1000 175 500 8.5 / 215.9 12.0 / 304.8 1.125 / 28.6 0.75 / 19.1 2.50 / 63.5 1.75 / 44.5 2.50 / 63.5 1.75 / 44.5 * https://www.ohmite.com/assets/docs/200-210-270-custom.pdf 57 K L100 L175 L 25 L 1.75 / 44.4 40 P 46 46 S 45 S 45 ** https://www.ohmite.com/assets/docs/terminals.pdf O R D E R I N G I N F O R M AT I O N Standard Made-to-order Non-inductive F = Fast on Blank = Standard N = Non-inductive (optional) L Series Coating Blank = Vitreous C = Centohm S = Silicone Non-inductive Blank = Standard N = Non-inductive RoHS Compliant Core Diameter See “Core and Terminal Selection” RoHS Compliant 25J100E Wattage Coating 270 = Vitreous 470 = Silicone Ceramic Terminal Type See “Resistor Terminals for Tubular Cores” Wattage Tolerance Ohms J = 5% 1R0 = 1Ω K = 10% 250 = 250Ω 1K0 = 1,000Ω 25K = 25,000Ω 25K5 = 25,500Ω Ohms R500 = 0.500Ω 1R00 = 1Ω 250R = 250Ω 1K00 = 1,000Ω 25K0 = 25,000Ω 25K5 = 25,500Ω Tolerance J = 5% K = 10% See website for custom core and terminal info: http://www.ohmite.com/assets/docs/terminals.pdf Red outlined values supplied in Silicone-Ceramic coatings instead of vitreous enamel. 113 L1000J–––1000 L500J––– 500 L225J––– 225 L175J––– 175 L100J––– 100 L50J––– 50 Part No. Prefix  Suffix 2,500 –––2K5E     3,000 –––3K0E      3,500 –––3K5E  4,000 –––4K0E   5,000 –––5K0E      6,000 –––6K0E  7,500 –––7K5E     10,000 –––10KE      12,000 –––12KE  15,000 –––15KE     20,000 –––20KE     25,000 –––25KE    30,000 –––30KE   35,000 –––35KE  40,000 –––40KE   50,000 –––50KE     60,000 –––60KE  75,000 –––75KE    100,000 –––100KE      150,000 –––150KE  200,000 –––200KE  250,000 –––250KE  rev 4/22-1 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com L25J––– 25 Ohmic value L225J––– 225 L100J––– 100 L500J––– 500 Wattage   = Standard values; check availability using the worldwide inventory search at www.ohmite.com Part No. Prefix  Suffix 1 –––1R0E      2 –––2R0E      3 –––3R0E      4 –––4R0E      5 –––5R0E      10 –––10RE      15 –––15RE  25 –––25RE      50 –––50RE      75 –––75RE      100 –––100E      125 –––125E   150 –––150E      200 –––200E   250 –––250E      500 –––500E      750 –––750E     800 –––800E   1,000 –––1K0E      1,500 –––1K5E     2,000 –––2K0E       L12J180E L12J270E L12J330E L12J390E L12J470E L12J560E L12J1K0E L12J1K2E L12J1K5E L12J2K2E L12J2K7E L12J4K7E L12J10KE L12J18KE L12J22KE L12J51KE L175J––– 175 12 Watt                 L50J––– 50 Wattage L25J––– 25 12 Watt 0.51  L12JKR51E 1  L12J1R0E 3.3  L12J3R3E 4.7  L12J4R7E 10  L12J10RE 12  L12J12RE 15  L12J15RE 22  L12J22RE 27  L12J27RE 33  L12J33RE 47  L12J47RE 68  L12J68RE 82  L12J82RE 100  L12J100E 150  L12J150E Ohmic value 180 270 330 390 470 560 1000 1200 1500 2200 2700 4700 10000 18000 22000 51000 Ohmic value Ohmic value L1000J–––1000 Standard part numbers for 270 series