TAP600J10RE

TAP600 Series 600 Watt Heat Sinkable Planar Ohmite’s TAP600 delivers 600 watts of reliable power to a variety of power conditioning, power transmission, and power control applications. These resistors can be designed for liquid or air cooled heat sink systems. Applications include variable speed drives, power supplies, robotics, motor control, and other control devices. F e at u r e s • Dielectric Strength up to 12KV • Special Design for Low Inductance and Capacitance Values • Contacts allow for easy load connection with M5 screws (not included) available with M4 as special request. Thread depth 7mm • Encapsulated with a special resin filled epoxy casing with a large creepage distance to mass, large air distance between terminals, and a high insulation resistance (CTI 600). • Materials meet the requirements of UL94-V0 characteristics Resistance Values 0.25Ω to 100KΩ Resistance Tolerance ±10% Std., 5% available on request. Test Method Short Time 1000 W/10 Sec. @ Overload 70°C Temperature Coefficient ±150ppm/°C (others upon request) Maximum Working Voltage 5,000V DC, higher voltage on request, not exceeding max. power Power Rating 600W at 70°C heat sink temperature or 85°C bottom case temperature. This value is only valid by using a thermal conduction to the heat sink Rth -cs