TAP800L5R0E

Ohmite’s TAP800 Series dissipates 800 watts of power when used with a liquid or air cooled heat sink system. The TAP800 rounds out 600 watt (TAP600) and 1000 watt (TAP1000) product offerings. Applications include variable speed drives, power supplies, robotics, motor control, control devices, and other power designs. FEATURES • Electric support is high alumina content ceramic metallized on the bottom for ideal heat transfer and optimum discharge. • Encapsulated with a special resin filled epoxy casing with a large creepage distance to mass, large air distance between terminals, and a high insulation resistance (CTI 600). • Resistive element is specially designed for low inductance and capacitance. The element provides stable performance in addition to high wattage and pulse loading capability. • Contacts allow for easy load connecting with M4 or M5 screws (not included). • Materials meet the requirements of UL94-V0 SPECIFICATIONS Electrical Resistance Values: 1Ω to 10KΩ • Resistance Tolerance: ±5% to ±10% • Temperature Coefficient: ±150ppm/°C (others upon request) • Maximum Working Voltage: 5,000V DC, higher voltage on request, not exceeding max. power • Short Time Overload: 1,200W at 70°C for 10sec., ΔR=0.4% max. • Power Rating: 800W at 85°C Bottom case temperature. • Peak Current: up to 1500 amp. depending on pulse length and frequency Please ask for details • Electric Strength Voltage: 6kVrms, 50Hz,upto 12kVrms on special request. • Single Shot Voltage: up to 12kV Normwave (1.5/50 µsec) • Partial Discharge:4KVrms,