TGA-003

TG Series Three Phase General Type EMI Filter with Neutral The Ohmite TG series of general purpose three phase filters is designed for use in a wide range of applications. All TG series filters contain a neutral connection point. The TG series reduces electromagnetic interference and helps in maintaining compliance with EMI emission standards. S e r i e s S p e c i f i c at i o n s F e at u r e s • General Purpose • Compact • Superior Performance • Chassis mounting 3 Phase Filter 4 Wire a p p l i c at i o n s • CNC Machines • Electronic Equipment • Convertors • Rectifier • UPS/Inverters Rated Leakage current current (mA) Termination Part No. @40°C @250VAC/50Hz Tab Screw TGA-001 1A 3 6.3 x 0.8 TGA-003 3A 3 6.3 x 0.8 TGA-006 6A 3 6.3 x 0.8 TGA-010 10A 3 6.3 x 0.8 TGA-015 15A 3 M5 TGA-016 16A 3 M5 TGA-020 20A 3 M5 TGA-025 25A 3 M5 TGA-030 30A 3 M5 TGA-040 40A 3 M5 TGA-050 50A 3 M6 TGA-060 60A 3 M6 TGA-075 75A* 3 M8 TGA-080 80A* 3 M8 TGA-100 100A* 3 M10 TGA-125 125A* 13.8 M10 TGA-150 150A* 13.8 M10 *Not covered under CSA Weight (kg) 0.26 0.26 0.26 0.26 0.7 0.7 0.7 0.7 0.7 0.7 1.2 1.2 9 9 9 9 9 c h a r a c t e r i st i c s Maximum Cont. Oper. Voltage 440 or 520VAC Operating Frequency 50/60Hz Current ratings 1A to 150A @40°C High Potential test voltage L to G 2660Vdc for 1 min.; L to L 1950Vdc for 1 min. Overload Capability 135% of Rated current for 15 min Design corresponding to UL60939-3, CSA 22.2 No.8-13 and IEC 60939 Flammability corresponding to UL 94 V-0 Temperature range -25°C to +85ºC Climatic Category 25/85/21 Recommended Torque (Nm) M5: 2-3; M6: 3.5-4; M8: 10-14; M10: 15-17 (continued) 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 1 TG Series Three Phase General Type EMI Filter with Neutral circuit diagram L I N E L1 L1' L2 L2' L3 L3' N N' E E L O A D i n s e r t i o n l o ss -10 -10 -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 1A 3A 6A 10A -70 -80 15/16A 20A 25A 30A -70 -80 -90 -90 Start 30.00kHz Stop 30.00MHz Start 30.00kHz -10 -10 -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 40A 50A 60A 75A -70 -80 Stop 30.00MHz 80A 100A 125A 150A -70 -80 -90 -90 Start 30.00kHz Stop 30.00MHz Start 30.00kHz Stop 30.00MHz (continued) 2 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com TG Series Three Phase General Type EMI Filter with Neutral dimensions All dimensions in mm; Tolerances according to ISO2768-m 75 ±.2 Ø5 50 ±.5 8 51 ±1 4 39 ±1 62 6.3x0.8 1A to 10A 115 ±.25 130 100 ±.5 85 ±.5 80 9.35 120 ±.5 78.5 86 ±.5 107 96.5 ±.3 40 ±1 50A to 60A 46.5 7 15A to 40A 328 ±.3 100 ±.5 10 160 ±.5 75A to 150A 120 ±.3 300 ±.5 92 ±.5 350 ORDERIN G IN F ORMA T ION TGA-002 Series Voltage Current A = 440V rating B = 520V Standard part numbers TGA-001 TGA-040 TGA-003 TGA-050 TGA-006 TGA-060 TGA-010 TGA-075 TGA-015 TGA-080 TGA-016 TGA-100 TGA-020 TGA-125 TGA-025 TGA-150 TGA-030 rev 05/20-1 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 3