TGHLV1R00JE

TGH Series 120 and 200 Watt SOT227Package Thick Film Power Due to their non-inductive design, these resistors are ideally suited for high-frequency and pulse-load applications.  Available in 120- or 200-watt sizes, this resistor is designed for direct mounting onto a heatsink.  Popular applications include variable speed drives, power supplies, control devices, telecom, robotics, motor controls, and other switching designs. characteristics Contacts Nickel-plated copper Derating Substrate Al203 (96%) Percent Rated Power Molding Compound High-performance epoxy, compliant to UL94-V0 Terminal Nuts American standard 303 stainless steel Resistance Range 0.1Ω to 1MΩ Tolerance ±5%; other tolerances available on request Voltage Proof Dielectric Strength up to 4,000V DC against ground 96 160 60 72 120 40 48 80 20 24 40 0 0 25 50 85 100 125 150 175 Bottom of base plate Temperature, °C 0 Best results can be reached by using a thermal transfer compound with a heat conductivity of better than 1W/mK Max. Working Voltage 500V (1000V, not to exceed rated wattage using √P*R.) Partial Discharge up to 2,000Vrms/80 pC 80 0 Temperature coefficient: ±250ppm (at +105°C ref. to +25°C) Power Rating at 85°C 120W (see derating) Type: H L 120 200 100 Rated Power, W Heat Sink Nickel-plated copper Configurations (per package) Heat Resistance to Cooling Plate Rth