TKA-075

TK Series Three Phase Book Shelf Type EMI Filter These series range of three phase filters with book shelf design is designed for motor drive applications requiring minimum space and convenient installation with superior performance at significant interference levels. F e at u r e s S e r i e s S p e c i f i c at i o n s • 3 Phase filters for drives/invertors • Compact/Light Weight/Cost Effective • Bookshelf Design • 7A to 150A Current rating Part No. TKA-007 TKA-016 TKA-030 TKA-042 TKA-055 TKA-075 TKA-100 TKA-120 TKA-150 a p p l i c at i o n s • AC/DC Drives • Generator • Wind Turbine • Fuel Cells • Elevators Rated current Weight @40°C Termination (kg) 7A 41 0.7 16A 41 0.8 30A 41 0.8 42A 10 1.2 55A 10 2 75A 16 2 100A 25 3 120A 50 4 150A 50 4 c h a r a c t e r i st i c s Max. Cont. Oper. Voltage 440/520/600VAC Operating Frequency 50/60Hz Current ratings 7A to 150A @40°C High Potential test voltage L to G 2660Vdc for 1 Minute; L to L 1950Vdc for 1 Minute Overload Capability 135% of Rated current for 15 minutes Design corresponding to UL 60939-3, CSA 22.2 No.8-13 and IEC 60939 Flammability corresponding to UL 94 V-0 Temperature range -25°C to +85ºC Climatic Category 25/85/21 Enclosure Material Aluminium (continued) 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 1 TK Series Three Phase Book Shelf Type EMI Filter circuit diagram L I N E L1 L1' L2 L2' L3' L3 L O A D E E i n s e r t i o n l o ss -10 -10 -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 7A 16A 30A -70 -80 42A 55A 75A -70 -80 -90 -90 Start 30.00kHz Stop 30.00MHz Start 30.00kHz Stop 30.00MHz -10 -20 -30 -40 -50 -60 100A 120A 150A -70 -80 -90 Start 30.00kHz Stop 30.00MHz (continued) 2 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com TK Series Three Phase Book Shelf Type EMI Filter dimensions All dimensions in mm; Tolerances according to ISO2768-m L2 S W2 W1 L2 L3 W2 W1 S L1 T L3 L1 T H 120A & 150A H 7A to 100A N N Size L1 L2 L3 H W1 W2 S N T 7A 160 ±1 174 ±.5 190 75 ±1 47 ±.5 20 ±.2 4.5 M5 41 16A 220 ±1 235 ±.5 250 85 ±1 45 ±1 25 ±.2 5 M5 41 30A 240 ±1 255 ±.5 270 ±1 86.5 ±1 50 ±1 30 ±.2 5 M6 41 42A 280 ±1 295 ±.5 310 ±1 86.5 ±1 50 30 ±.2 5 M6 10 55A 220 ±1 235 ±.5 250 ±1 90 ±1 86 ±1 59.1 ±.2 5.4 M6 10 75A 240 ±1 255 ±.5 270 ±1 135 ±1 85 ±1 60 ±.2 5 M8 16 100A 240 ±1 255 ±.5 270 ±1 150 ±1 91 ±1 65 ±.3 6.5 M10 25 120 & 150A 261 ±1 292 ±.3 312 ±1 203 ±1 112 ±1 88 ±.3 7 M10 50 Termination type Wire Section (mm²) Wire Section (AWG) Wire Stripping Max Recommended Torque 41 10 16 25 50 4 mm² 10 mm² 16 mm² 25 mm² 50 mm² 12AWG 8 AWG 6 AWG 4 AWG 1/0 AWG max 10mm max 13.5 mm max 17 mm max 17 mm max 20 mm 0.5 Nm 4.5 in.lbs 1.2 Nm 10.8 in.lbs 2-2.2 Nm 18-19.8 in.lbs 2 Nm 18 in.lbs 6 Nm 54 in.lbs ORDERING IN F ORMA T ION TKA-007 Series Voltage Current A = 440V rating B = 520V C = 600V Standard part numbers TKA-007 TKA-016 TKA-030 TKA-042 TKA-055 TKA-075 TKA-100 TKA-120 TKA-150 rev 7/20-1 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 3