MSM64152A

E2E0028-38-95 ¡ Semiconductor MSM64152A/64152AL ¡ Semiconductor This version: Sep. 1998 MSM64152A/64152AL Previous version: Mar. 1996 4-Bit Microcontroller with Built-in LCD Driver and Melody Circuit GENERAL DESCRIPTION The MSM64152A (1.5 V)/64152AL (3.0 V) is a high-performance 4-bit microcontroller that incorporates Oki-original CPU core nX-4/20. The MSM64152A/64152AL has an LCD driver for up to 104 segments, an event counter, and a melody circuit. It is best suited for applications such as clocks and LCD games. FEATURES • Operating range Operating voltage Operating temperature Operating frequency : 1.5 V/3.0 V : –40 to +70 °C : 32.768 kHz crystal oscillation Approx. 32 kHz RC oscillation Supply current (Typ.) : 0.9 mA (3.0 V at HALT mode) • Minimum instruction execution time : 91 ms • General memory space : 1504 bytes • Local memory space : 128 nibbles • LCD driver : 30 Common driver ¥ 4 Segment driver ¥ 26 1/4 duty, 1/3 bias; 104 segments (26 ¥ 4) 1/3 duty, 1/3 bias; 78 segments (26 ¥ 3) • I/O port Input-output port : 1 port ¥ 4 bits (open-drain output/CMOS output selectable; pull-down resistor input/high-impedance input selectable) Input port : 1 port ¥ 4 bits (pull-down resistor input/high-impedance input selectable) Output port : 1 port ¥ 4 bits (CMOS output) • Event counter : 1 channel • Melody output :1 • Interrupts : 7 sources External 2, time base 4, melody 1 • Package: 60-pin plastic QFP (QFP60-P-1519-1.00-K) : (Product name : MSM64152A-¥¥¥GS-K, MSM64152AL-¥¥¥GS-K) Chip : MSM64152A-¥¥¥, MSM64152AL-¥¥¥ ¥¥¥ indicates a code number. • OTP version (for program evaluation) : MSM64P155/64P155L (The package, power polarity, and operating voltage of the MSM64P155/64P155L are different from the MSM64152A/64152AL. For details, refer to the "MSM64P155 User's Manual".) 1/25 ¡ Semiconductor MSM64152A/64152AL BLOCK DIAGRAM C2 C1 VSS3 VSS2 VSS1 COM4 COM3 COM2 COM1 COM DRV BIAS SEG0 LCD DRV SEG25 BSR TR2 TR0 (4) PCM PCL TR1 PCH A8 to A11 A7 to A0 RAM 128N (8) C ALU PORT ADDRESS ROM 1504B HALT MIEF B A (4) (4) H L X Y LCD CNT DB7 to DB0 OSC0 OSC1 TIMING CONTROLLER SP ROMR OSC INTC DSPR IR DECODER IR RESET TST1 TST2 TST3 VSSL RST TBC (8) MD0 MD0 MD0 TST PORT ADDRESS DB7 to DB0 VR BUP CAPR PORT2 PORT4 PORT6 P2.0 P2.1 P2.2 P2.3 is the CPU core (nX-4/20). P4.0 P4.1 P4.2 P4.3 P6.0 P6.1 P6.2 P6.3 VDD 2/25 ¡ Semiconductor MSM64152A/64152AL PIN CONFIGURATION (TOP VIEW) 56 RESET 55 TST1 48 OSC1 47 OSC0 46 VSSL 45 VSS1 44 VSS2 43 VSS3 42 C1 41 C2 40 COM1 39 COM2 38 COM3 37 COM4 36 SEG0 35 SEG1 34 SEG2 33 SEG3 32 SEG4 31 (NC) 54 TST2 53 TST3 60 P4.0 59 P4.1 58 P4.2 57 P4.3 52 P2.0 51 P2.1 P6.3 P6.2 P6.1 P6.0 MD0 MD0 VDD SEG25 SEG24 1 2 3 4 5 6 7 8 9 SEG23 10 SEG22 11 SEG21 12 SEG20 13 SEG19 14 SEG18 15 (NC) 16 SEG17 17 SEG16 18 SEG15 19 SEG14 20 SEG13 21 SEG12 22 (NC) 23 SEG11 24 SEG10 25 SEG9 26 SEG8 27 SEG7 28 SEG6 29 50 P2.2 49 P2.3 60-Pin Plastic QFP Note: Pins marked as (NC) are no-connection pins which are left open. SEG5 30 3/25 ¡ Semiconductor MSM64152A/64152AL PAD CONFIGURATION Pad Layout 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 44 45 46 47 48 49 50 51 52 53 54 55 56 57 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 28 27 26 25 24 23 22 21 20 19 18 17 16 Y X Chip Size Chip Thickness Coordinate Origin Pad Hole Size Pad Size Minimum Pad Pitch : : : : : : 3.90 mm ¥ 3.48 mm 350 mm (typ.) Chip center 110 mm ¥ 110 mm 120 mm ¥ 120 mm 180 mm Note: The chip substrate voltage is VDD. 4/25 ¡ Semiconductor Pad Coordinates Pad No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Pad Name P6.3 P6.2 P6.1 P6.0 MD0 MD0 VDD SEG25 SEG24 SEG23 SEG22 SEG21 SEG20 SEG19 SEG18 SEG17 SEG16 SEG15 SEG14 SEG13 SEG12 SEG11 SEG10 SEG9 SEG8 SEG7 SEG6 SEG5 SEG4 SEG3 SEG2 SEG1 SEG0 COM4 COM3 COM2 COM1 C2 C1 VSS3 X (µm) –1529 –1307 –1085 –863 –640 –418 –196 26 242 459 675 892 1108 1324 1541 1749 1749 1749 1749 1749 1749 1749 1749 1749 1749 1749 1749 1749 1541 1324 1108 892 675 459 242 26 –196 –418 –640 –863 Y (µm) –1589 –1589 –1589 –1589 –1589 –1589 –1589 –1589 –1589 –1589 –1589 –1589 –1589 –1589 –1589 –1357 –1140 –923 –706 –490 –273 38 254 471 687 904 1120 1336 1589 1589 1589 1589 1589 1589 1589 1589 1589 1589 1589 1589 Pad No. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 MSM64152A/64152AL Pad Name VSS2 VSS1 VSSL OSC0 OSC1 P2.3 P2.2 P2.1 P2.0 TST3 TST2 TST1 RESET P4.3 P4.2 P4.1 P4.0 X (µm) –1085 –1307 –1529 –1749 –1749 –1749 –1749 –1749 –1749 –1749 –1749 –1749 –1749 –1749 –1749 –1749 –1749 Y (µm) 1589 1589 1589 1340 1132 924 715 507 299 91 –117 –326 –534 –743 –952 –1160 –1369 5/25 ¡ Semiconductor MSM64152A/64152AL PIN DESCRIPTIONS Basic Functions Function Power Supply Pin 7 45 44 43 42 41 46 Oscillation 47 48 Test 55 54 53 RESET 56 Pad 7 42 41 40 39 38 43 44 45 52 51 50 53 Symbol VDD VSS1 VSS2 VSS3 C1 C2 VSSL OSCO OSC1 TST1 TST2 TST3 RESET Type — — — — — — — I O I I I I System reset input pin : Setting this pin to "H" level puts this device into a reset state. Then, setting this pin to "L" level starts executing an instruction from address 000H. This pin is internally connected to VSS1 or VSS2 through a pull-down resistor. Description Digital supply voltage(0 V) Digital negative power supply (1.5 V spec.) Bias output for LCD driver (3.0 V spec.) Digital negative power supply (3.0 V spec.) Bias output for LCD driver (1.5 V spec.) Bias output for LCD driver (–4.5 V) For connection to capacitors that generate bias for the LCD driver Negative power supply voltage pin for internal logic (An internally generated constant voltage is present at this pin.) Clock oscillation pins: Either a crystal (32.768 kHz) and a capacitor (10 to 30 pF) are connected to these pins or a resistor (1 MW) is. Input pins for test 6/25 ¡ Semiconductor Basic Functions (continued) Function Ports Pin 52 51 50 49 Pad 49 48 47 46 Symbol P2.0 P2.1 P2.2 P2.3 Type I MSM64152A/64152AL Description 4-bit input port (port 2) : Select between pull-down resistor input and high impedance input for each bit with the port 2 control register (P2CON). When configured for secondary functions, an external interrupt and capture circuit trigger input are allocated. If P2.0 to P2.3 are set to "H" level, the IC enters system reset mode. 4-bit output port (port 4) : 4-bit CMOS output port. 60 59 58 57 4 3 2 1 Melody Drivers LCD Drivers 5 6 40 39 38 37 57 56 55 54 4 3 2 1 5 6 37 36 35 34 P4.0 P4.1 P4.2 P4.3 P6.0 P6.1 P6.2 P6.3 MD0 MD0 COM1 COM2 COM3 COM4 O I/O 4-bit input-output port (port 6) : Select between input and output, between pull-down resistor input and high impedance input, and between open-drain output and CMOS output with the port 6 control register (P6CON). When configured for a secondary function, an external interrupt is allocated. Output pin of melody driver 0 Inverted output pin of MD0 output LCD common signal output pins O O O O O O 7/25 ¡ Semiconductor Basic Functions (continued) Function LCD Drivers Pin 36 35 34 33 32 30 29 28 27 26 25 24 22 21 20 19 18 17 15 14 13 12 11 10 9 8 Pad 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 Symbol SEG0 SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24 SEG25 Type O O O O O O O O O O O O O O O O O O O O O O O O O O MSM64152A/64152AL Description LCD segment signal output pins 8/25 ¡ Semiconductor Secondary Functions Function External Interrupts Pin 52 51 50 49 Pad 49 48 47 46 Symbol P2.0 P2.1 P2.2 P2.3 Type I MSM64152A/64152AL Description P2.0 to P2.3 secondary functions : These are level-triggered external interrupt input pins. Select interrupt enable/disable for each bit with the P2 interrupt enable register (P2IE). If P2.0 to P2.3 pins are set to "H" level for a minimum of 2 seconds, the device enters system reset mode. P2.0, P2.1 secondary functions : trigger input pins for capture circuit. P6.0 to P6.3 secondary functions : These are level-triggered external interrupt input pins. 4 3 2 1 4 3 2 1 P6.0 P6.1 P6.2 P6.3 I 9/25 ¡ Semiconductor Handling When Specific Pins Are Not Used Symbol TST1 to TST3 Open P2.0 to P2.3 "L" level or open P4.0 to P4.3 Open P6.0 to P6.3 In input mode : "L" level or open (Initial setting: input mode) In output mode : Open Recommended Pin Connection MSM64152A/64152AL Open MD0, MD0 COM1 to COM4 Open SEG0 to SEG25 Open 10/25 ¡ Semiconductor MSM64152A/64152AL ABSOLUTE MAXIMUM RATINGS 1.5 V Spec. (MSM64152A) (VDD = 0 V) Parameter Power Supply Voltage 1 Power Supply Voltage 2 Power Supply Voltage 3 Power Supply Voltage 4 Input Voltage 1 Input Voltage 2 Output Voltage 1 Output Voltage 2 Output Voltage 3 Output Voltage 4 Storage Temperature Symbol VSS1 VSS2 VSS3 VSSL VIN1 VIN2 VOUT1 VOUT2 VOUT3 VOUT4 TSTG Condition Ta = 25°C Ta = 25°C Ta = 25°C Ta = 25°C VSS1 input, Ta = 25°C VSSL input,Ta = 25°C VSS1 output,Ta = 25°C VSS2 output,Ta = 25°C VSS3 output,Ta = 25°C VSSL output,Ta = 25°C — Rating –2.0 to +0.3 –4.0 to +0.3 –5.5 to +0.3 –2.0 to +0.3 VSS1 – 0.3 to +0.3 VSSL – 0.3 to +0.3 VSS1 – 0.3 to +0.3 VSS2 – 0.3 to +0.3 VSS3 – 0.3 to +0.3 VSSL – 0.3 to +0.3 –55 to +150 Unit V V V V V V V V V V °C RECOMMENDED OPERATING CONDITIONS 1.5 V Spec. (MSM64152A) (VDD = 0 V) Parameter Operating Temperature Operating Voltage Crystal Oscillation Frequency External RC Oscillator Resistance Symbol Top VSS1 fXT ROS Condition — BUPF = "0" BUPF = "1" — — Range –40 to +70 –1.7 to –1.25 –1.7 to –1.15 30 to 35 1M ±10% Unit °C V kHz W 11/25 ¡ Semiconductor MSM64152A/64152AL ELECTRICAL CHARACTERISTICS 1.5 V Spec. (MSM64152A) DC Characteristics (VDD = 0 V, VSS1 = –1.5 V, Ta = –40 to +70°C unless otherwise specified.) Parameter Symbol Condition Ca, Cb, C12 = 0.1 mF +100% –20% Ta = –40 to +60°C BUPF = "0" Ca, Cb, C12 = 0.1 mF +100% –20% Ta = –40 to +70°C BUPF = "0" Ca, Cb, C12 = 0.1 mF +100% –20% Ta = –40 to +60°C BUPF = "1" Ca, Cb, C12 = 0.2 mF +100% –20% Ta = –40 to +70°C BUPF = "1" Ca, Cb, C12 = 0.1 mF +100% –20% Ta = –40 to +60°C BUPF = "0" Ca, Cb, C12 = 0.1 mF +100% –20% Ta = –40 to +70°C BUPF = "0" Ca, Cb, C12 = 0.1 mF +100% Ta = –40 to +60°C –20% BUPF = "1" Ca, Cb, C12 = 0.2 mF +100% Ta = –40 to +70°C –20% BUPF = "1" BUPF = "0" BUPF = "1" Oscillation start time: within 5 seconds after reset — — — ROS = 1 MW Min. Typ. Max. Unit Measuring Circuit –3.2 –3.0 –2.8 –3.2 –3.0 –2.7 V –3.2 –3.0 –2.5 VSS2 Voltage VSS2 –3.2 –3.0 –2.3 1 1' –4.7 –4.5 –4.2 –4.7 –4.5 –4.0 V –4.7 –4.5 –3.9 VSS3 Voltage VSS3 –4.7 –4.5 –3.7 –1.5 –1.3 –0.6 –1.9 –1.3 –0.6 — — 10 10 15 — — — 15 40 –1.45 –1.15 30 20 75 VSSL Voltage Crystal Oscillation Start Voltage Crystal Oscillation Hold Voltage External Crystal Oscillator Capacitance Internal Crystal Oscillator Capacitance RC Oscillation Frequency VSSL VSTA VHOLD CG CD fCR V V V 1 pF pF kHz 1' 12/25 ¡ Semiconductor DC Characteristics (continued) • 32.768 kHz crystal oscillation MSM64152A/64152AL (VDD = 0 V, VSS1 = –1.5 V, Ta = –40 to +70°C unless otherwise specified.) Parameter Supply Current 1 Supply Current 1 Supply Current 2 Supply Current 2 Symbol IDD1 IDD1 IDD2 IDD2 Condition CPU is in HALT state BUPF = "0" CPU is in HALT state BUPF = "1" BUPF = "0" BUPF = "1" Min. Typ. Max. Unit 2.0 2.0 3.0 3.0 6.0 6.0 10 10 6.0 40 10 50 15 50 25 60 mA mA mA mA mA mA mA mA 1 Measuring Circuit Ta = –40 to +40°C — Ta = +40 to +70°C — Ta = –40 to +40°C — Ta = +40 to +70°C — Ta = +40 to +70°C — Ta = +40 to +70°C — CPU is in operation state Ta = –40 to +40°C — CPU is in operation state Ta = –40 to +40°C — • RC oscillation (VDD = 0 V, VSS1 = –1.5 V, ROS = 1 MW, Ta = –40 to +70°C unless otherwise specified.) Parameter Supply Current 1 Supply Current 1 Supply Current 2 Supply Current 2 Symbol IDD1 IDD1 IDD2 IDD2 Condition CPU is in HALT state BUPF = "0" CPU is in HALT state BUPF = "1" BUPF = "0" BUPF = "1" Min. Typ. Max. Unit 3.0 3.0 6.0 6.0 7.0 7.0 15 15 10 45 15 50 20 50 30 70 mA mA mA mA mA mA mA mA 1' Measuring Circuit Ta = –40 to +40°C — Ta = +40 to +70°C — Ta = –40 to +40°C — Ta = +40 to +70°C — Ta = +40 to +70°C — Ta = +40 to +70°C — CPU is in operation state Ta = –40 to +40°C — CPU is in operation state Ta = –40 to +40°C — 13/25 ¡ Semiconductor DC Characteristics (continued) MSM64152A/64152AL (VDD = 0 V, VSS1 = VSSL = –1.5 V, VSS2 = –3.0 V, VSS3 = –4.5 V, Ta = –40 to +70°C unless otherwise specified.) Parameter (Pin Name) Output Current 1 (P4.0 to P4.3) (MD0, MD0) Output Current 2 (SEG0 to SEG25) (COM1 to COM4) Symbol IOH1 IOL1 IOH2 IOMH2 IOMH2S IOML2 IOML2S IOL2 Output Current 3 (P6.0 to P6.3) Output Leakage Current (P6.0 to P6.3) Input Current 1 (P2.0 to P2.3) (P6.0 to P6.3) Input Current 2 (TST1, TST2, TST3) Condition VOH1 = –0.5 V VOL1 = VSS1 + 0.5 V VOH2 = –0.2 V VOMH2 = VSS1 + 0.2 V VOMH2S = VSS1 – 0.2 V VOML2 = VSS2 + 0.2 V VOML2S = VSS2 – 0.2 V VOL2 = VSS3 + 0.2 V VOH3 = –0.5 V VOL3 = VSS1 + 0.5 V VOH = VDD VOL = VSS1 VIH1 = VDD VIH1 = VDD VIL1 = VSS1 VIH2 = VDD VIL2 = VSS1 VIH3 = VDD VIL3 = VSS1 — (When pulled down) (In a high-impedance state) (VDD level) (VSS1 level) (VSS1 level) (VSS2 level) (VSS2 level) (VSS3 level) Min. Typ. Max. Unit –2.0 –0.6 –0.1 0.1 — 4.0 — 4.0 — 4.0 0.1 — –0.3 1.0 0 –1.0 0.3 –1.0 15 –1.0 –0.3 0.6 — — — — — — 0.7 — — 20 — — 0.75 — 40 — — 2.0 –4.0 — –4.0 — –4.0 — 2.0 0.3 — 100 1.0 0 1.5 0 100 0 0 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA V Measuring Circuit 2 IOH3 IOL3 IOOH IOOL IIH1 IIH1Z IIL1 IIH2 IIL2 IIH3 IIL3 VIH1 –5.0 –2.1 –0.3 3 Input Current 3 (RESET) Input Voltage 1 (P2.0 to P2.3) (P6.0 to P6.3) (TST1, TST2, TST3) (RESET) 4 VIL1 — –1.5 — –1.2 V 14/25 ¡ Semiconductor Measuring circuit 1 MSM64152A/64152AL OSC1 Crystal 32.768 kHz OSC0 VDD CG MSM64152A C1 C12 C2 VSSL VDD VSS1 VSS2 VSS3 CL Ca V A V Cb V Ca, Cb, C12 CL CG : 0.1 to 0.2 mF : 0.1 mF : 15 pF Measuring circuit 1' OSC1 ROS OSC0 MSM64152A C1 C12 C2 VSSL VDD VSS1 VSS2 VSS3 CL Ca V A V Cb V Ca, Cb, C12 CL ROS : 0.1 to 0.2 mF : 0.1 mF : 1 MW 15/25 ¡ Semiconductor Measuring circuit 2 MSM64152A/64152AL (*2) VIH (*1) VIL A MSM64152A VDD VSS1 VSS2 VSS3 VSSL Measuring circuit 3 (*3) A MSM64152A VDD VSS1 VSS2 VSS3 VSSL OUTPUT INPUT OUTPUT INPUT 16/25 ¡ Semiconductor Measuring circuit 4 MSM64152A/64152AL VIH (*3) VIL MSM64152A VDD VSS1 VSS2 VSS3 VSSL *1 Input logic circuit to determine the specified measuring conditions. *2 Measured at the specified output pins. *3 Measured at the specified input pins. OUTPUT INPUT Waveform Monitoring 17/25 ¡ Semiconductor MSM64152A/64152AL ABSOLUTE MAXIMUM RATINGS 3.0 V Spec. (MSM64152AL) (VDD = 0 V) Parameter Power Supply Voltage 1 Power Supply Voltage 2 Power Supply Voltage 3 Power Supply Voltage 4 Input Voltage 1 Input Voltage 2 Output Voltage 1 Output Voltage 2 Output Voltage 3 Storage Temperature Symbol VSS1 VSS2 VSS3 VSSL VIN1 VIN2 VOUT1 VOUT2 VOUT3 TSTG Condition Ta = 25°C Ta = 25°C Ta = 25°C Ta = 25°C VSS2 input, Ta = 25°C VSSL input,Ta = 25°C VSS2 output,Ta = 25°C VSS3 output,Ta = 25°C VSSL output,Ta = 25°C — Rating –2.0 to +0.3 –4.0 to +0.3 –5.5 to +0.3 –4.0 to +0.3 VSS2 – 0.3 to +0.3 VSSL – 0.3 to +0.3 VSS2 – 0.3 to +0.3 VSS3 – 0.3 to +0.3 VSSL – 0.3 to +0.3 –55 to +150 Unit V V V V V V V V V °C RECOMMENDED OPERATING CONDITIONS 3.0 V Spec. (MSM64152AL) (VDD = 0 V) Parameter Operating Temperature Operating Voltage Crystal Oscillation Frequency External RC Oscillator Resistance Symbol Top VSS2 fXT ROS Condition — BUPF = "0" BUPF = "1" — — Range –40 to +70 –3.5 to –2.5 –3.5 to –2.0 30 to 66 1 M ±10% Unit °C V kHz W 18/25 ¡ Semiconductor MSM64152A/64152AL ELECTRICAL CHARACTERISTICS 3.0 V Spec. (MSM64152AL) DC Characteristics (VDD = 0 V, VSS2 = –3.0 V, Ta = –40 to +70°C unless otherwise specified.) Parameter VSS1 Voltage VSS3 Voltage VSSL Voltage Crystal Oscillation Start Voltage Crystal Oscillation Hold Voltage External Crystal Oscillator Capacitance Internal Crystal Oscillator Capacitance RC Oscillation Frequency Symbol VSS1 VSS3 VSSL VSTA VHOLD CG CD fCR ROS = 1 MW Condition Ca, Cb, C12 = 0.1 mF +100% –20% Ca, Cb, C12 = 0.1 mF +100% –20% BUPF = "0" BUPF = "1" Oscillation start time: within 5 seconds after reset — — — Min. Typ. Max. Unit –1.7 –1.5 –1.3 –4.7 –4.5 –4.2 –1.5 –1.3 –0.6 –1.9 –1.3 –0.6 — — 10 10 15 — — — 15 40 –2.5 –2.0 30 20 75 V V V V V 1 pF pF kHz 1' 1 1' Measuring Circuit 19/25 ¡ Semiconductor DC Characteristics (continued) • 32.768 kHz crystal oscillation MSM64152A/64152AL (VDD = 0 V, VSS2 = –3.0 V, Ta = –40 to +70°C unless otherwise specified.) Parameter Supply Current 1 Supply Current 1 Supply Current 2 Supply Current 2 Symbol IDD1 IDD1 IDD2 IDD2 Condition CPU is in HALT state BUPF = "0" CPU is in HALT state BUPF = "1" BUPF = "0" BUPF = "1" Min. Typ. Max. Unit 0.9 0.9 1.5 1.5 3.0 3.0 5.0 5.0 4.5 30 6.0 40 10 40 15 50 mA mA mA mA mA mA mA mA 1 Measuring Circuit Ta = –40 to +40°C — Ta = +40 to +70°C — Ta = –40 to +40°C — Ta = +40 to +70°C — Ta = +40 to +70°C — Ta = +40 to +70°C — CPU is in operation state Ta = –40 to +40°C — CPU is in operation state Ta = –40 to +40°C — • RC oscillation (VDD = 0 V, VSS2 = –3.0 V, ROS = 1 MW, Ta = –40 to +70°C unless otherwise specified.) Parameter Supply Current 1 Supply Current 1 Supply Current 2 Supply Current 2 Symbol IDD1 IDD1 IDD2 IDD2 Condition CPU is in HALT state BUPF = "0" CPU is in HALT state BUPF = "1" BUPF = "0" BUPF = "1" Min. Typ. Max. Unit 1.5 1.5 3.0 3.0 4.0 4.0 8.0 8.0 6.0 40 10 50 12 50 25 60 mA mA mA mA mA mA mA mA 1' Measuring Circuit Ta = –40 to +40°C — Ta = +40 to +70°C — Ta = –40 to +40°C — Ta = +40 to +70°C — Ta = +40 to +70°C — Ta = +40 to +70°C — CPU is in operation state Ta = –40 to +40°C — CPU is in operation state Ta = –40 to +40°C — 20/25 ¡ Semiconductor DC Characteristics (continued) MSM64152A/64152AL (VDD = 0 V, VSS1 = VSSL = –1.5 V, VSS2 = –3.0 V, VSS3 = –4.5 V, Ta = –40 to +70°C unless otherwise specified.) Parameter (Pin Name) Output Current 1 (P4.0 to P4.3) (MD0, MD0) Output Current 2 (SEG0 to SEG25) (COM1 to COM4) Symbol IOH1 IOL1 IOH2 IOMH2 IOMH2S IOML2 IOML2S IOL2 Output Current 3 (P6.0 to P6.3) Output Leakage Current (P6.0 to P6.3) Input Current 1 (P2.0 to P2.3) (P6.0 to P6.3) Input Current 2 (TST1, TST2, TST3) Condition VOH1 = –0.5 V VOL1 = VSS2 + 0.5 V VOH2 = –0.2 V VOMH2 = VSS1 + 0.2 V VOMH2S = VSS1 – 0.2 V VOML2 = VSS2 + 0.2 V VOML2S = VSS2 – 0.2 V VOL2 = VSS3 + 0.2 V VOH3 = –0.5 V VOL3 = VSS2 + 0.5 V VOH = VDD VOL = VSS2 VIH1 = VDD VIH1 = VDD VIL1 = VSS2 VIH2 = VDD VIL2 = VSS2 VIH3 = VDD VIL3 = VSS2 — (When pulled down) (In a high-impedance state) (VDD level) (VSS1 level) (VSS1 level) (VSS2 level) (VSS2 level) (VSS3 level) Min. Typ. Max. Unit –6.0 –1.8 –0.7 0.7 — 4.0 — 4.0 — 4.0 –18 0.7 — –0.3 50 0 –1.0 0.75 –1.0 40 –1.0 –0.6 1.8 — — — — — — 1.6 — — 100 — — 1.5 — 80 — — 6.0 –4.0 — –4.0 — –4.0 — 6.0 0.3 — 300 1.0 0 3.0 0 200 0 0 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA V Measuring Circuit 2 IOH3 IOL3 IOOH IOOL IIH1 IIH1Z IIL1 IIH2 IIL2 IIH3 IIL3 VIH1 –6.0 –2.0 3 Input Current 3 (RESET) Input Voltage 3 (P2.0 to P2.3) (P6.0 to P6.3) (TST1, TST2, TST3) (RESET) 4 VIL1 — –3.0 — –2.4 V 21/25 ¡ Semiconductor Measuring circuit 1 MSM64152A/64152AL OSC1 Crystal 32.768 kHz OSC0 VDD CG MSM64152AL C1 C12 C2 VSSL VDD VSS2 VSS1 VSS3 CL Ca V A V Cb V Ca, Cb, C12, CL CG : 0.1 mF : 15 pF Measuring circuit 1' OSC1 ROS OSC0 MSM64152AL C1 C12 C2 VSSL VDD VSS2 VSS1 VSS3 CL Ca V A V Cb V Ca, Cb, C12, CL ROS : 0.1 mF : 1 MW 22/25 ¡ Semiconductor Measuring circuit 2 MSM64152A/64152AL (*2) VIH (*1) VIL A MSM64152AL VDD VSS1 VSS2 VSS3 VSSL Measuring circuit 3 (*3) A OUTPUT INPUT MSM64152AL VDD VSS1 VSS2 VSS3 VSSL OUTPUT INPUT 23/25 ¡ Semiconductor Measuring circuit 4 MSM64152A/64152AL VIH (*3) VIL MSM64152AL VDD VSS1 VSS2 VSS3 VSSL *1 Input logic circuit to determine the specified measuring conditions. *2 Measured at the specified output pins. *3 Measured at the specified input pins. OUTPUT INPUT Waveform Monitoring 24/25 ¡ Semiconductor MSM64152A/64152AL PACKAGE DIMENSIONS (Unit : mm) QFP60-P-1519-1.00-K Mirror finish Package material Lead frame material Pin treatment Solder plate thickness Package weight (g) Epoxy resin 42 alloy Solder plating 5 mm or more 1.50 TYP. Notes for Mounting the Surface Mount Type Package The SOP, QFP, TSOP, SOJ, QFJ (PLCC), SHP and BGA are surface mount type packages, which are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Oki’s responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times). 25/25