OL5300N-03

DATA SHEET O K I L A S E R P R O D U C T S OL5300N-03 Surface Mount Laser Diode Module (1550 nm, 0.3 mW) November 1999 s s ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Oki Semiconductor OL5300N-03 Laser Diode Module Surface Mount LD Module for Single-Mode Fiber INTRODUCTION Oki Semiconductor’s OL5300N-03 surface mount laser diode module feature a 1.5-µm, InGaAsP/InP laser diode providing 1550-nm output at 0.3 mW. These low-cost laser diodes is available in an 8-pin Mini-Dil package, has a built-in monitor photodiode, and is coupled to a single-mode fiber pigtail. FEATURES • • • • • • InGaAsP/InP laser diode Fiber output: 1550-nm output at 0.3 mW 1.5-µm technology Single-mode fiber 8-pin Mini-Dil package Includes a photodiode for power monitoring APPLICATION • • • • Optical transmission systems Digital video systems LAN systems Optical measurement / OTDRs Oki Semiconductor 1 s OL5300N-03 Laser Diode Module s ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings (ambient temperature Ta=25°C unless otherwise noted) Parameter Fiber Output Power Laser diode reverse voltage Photo diode forward current Photo diode forward voltage Operating Temperature (Ta) Storage Temperature Lead Soldering Temperature (1O sec) Symbol Pf VR(LD) IF(PD) VF(PD) Topr Tstg Tsol Ratings 2 2 10 15 -40 to +85 -40 to +85 260 Units mW V mA V °C °C °C Exceeding these maximum ratings could cause immediate damage or lead to permanent deterioration of the device. Optical and Electrical Characteristics (Ta=25°C) Parameter Fiber output power Threshold current Laser diode forward voltage Center wavelength RMS Spectral width Tracking error Rise and fall time Monitor current Im Symbol Pf Ith VOP(LD) λc σ TER Test Conditions CW Pf =0.3 mW Pf =0.3 mW, RMS Ta=40 to 65°C Pf =1 mW, RMS (σ) Im=constant@ Pf =0.3 mW (25°C) 10 to 90 % Pf =0.3 mW 100 Min. 0.3 --1430 Typ. --1550 Max. 40 1.5 1570 5 1.5 0.5 600 Units mW mA V nm nm dB ns uA Fiber Pigtail Specifications Parameter Type Mode Field Diameter Cladding Diameter Jacket Diameter Length Connector Specifications SM 10 +/-1 125 +/-2 900 1.0 (Minimum) FC Units --µm µm µm m --- Connector and Fiber Specifications Connector Fiber 1.31-µm single-mode fiber Diameter: 0.9 mm Color: Dark blue FC-PC, SC-PC, MUJ-PC etc Bending Radius: 20 mm (minimum) Heat resistant Length: Options (contact Oki Semiconductor) 2 Oki Semiconductor –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– s OL5300N-03 Laser Diode Module s PACKAGE DIMENSIONS (UNITS: MM) 1.0 2.50 1.8 7.62 8 11.20 5 (TOP VIEW) 5.60 1 0.25 1.0 2.54 Typ 4 1.75 3.0 Max All dimensions in millimeters (Typical) 0.46 Typ 0.17 Photo Diode 4 5 6 Laser Diode 7 LEAD CONNECTIONS (TOP VIEW) #8 #7 #6 #5 CASE LD PD CASE FIBER CASE CASE #1 #2 #3 #4 Pin Configuration Pin Mo. 01 02 03 04 Case Ground Case Ground Case Ground PD Cathode Description Pin No. 05 06 07 08 PD Anode LD Cathode LD Anode Case Ground Description Oki Semiconductor 3 s OL5300N-03 Laser Diode Module s ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Notes 4 Oki Semiconductor The information contained herein can change without notice owing to product and/or technical improvements. Please make sure before using the product that the information you are referring to is up-to-date. The outline of action and examples of application circuits described herein have been chosen as an explanation of the standard action and performance of the product. When you actually plan to use the product, please ensure that the outside conditions are reflected in the actual circuit and assembly designs. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited to, exposure to parameters outside the specified maximum ratings or operation outside the specified operating range. Neither indemnity against nor license of a third party's industrial and intellectual property right,etc.is granted by us in connection with the use of product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a third party's right which may result from the use thereof. When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges, including but not limited to operating voltage, power dissipation, and operating temperature. The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g.,office automation, communication equipment, measurement equipment, consumer electronics, etc.).These products are not authorized for use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or application may result in the loss or damage of property or death or injury to humans. Such applications include, but are not limited to: traffic control, automotive, safety, aerospace, nuclear power control, and medical, including life support and maintenance. Certain parts in this document may need governmental approval before they can be exported to certain countries. The purchaser assumes the responsibility of determining the legality of export of these parts and will take appropriate and necessary steps, at their own expense, for export to another country. Copyright 1999 Oki Semiconductor Oki Semiconductor reserves the right to make changes in specifications at anytime and without notice. This information furnished by Oki Semiconductor in this publication is believed to be accurate and reliable. However, no responsibility is assumed by Oki Semiconductor for its use; nor for any infringements of patents or other rights of third parties resulting from its use. No license is granted under any patents or patent rights of Oki. Oki Semiconductor Oki REGIONAL SALES OFFICES Northwest Area 785 N. Mary Avenue Sunnyvale, CA 94086 Tel: 408/720-8940 Fax: 408/720-8965 Southwest Area 2302 Martin Street Suite 250 Irvine, CA 92715 Tel: 979/752-1843 Fax: 979/752-2423 North Central Area 300 Park Blvd. Suite 365 Itasca, IL 60143 Tel: 630/250-1313 Fax: 630/250-1414 Southeast Area 1590 Adamson Parkway Suite 220 Morrow, GA 30260 Tel: 770/960-9660 Fax: 770/960-9682 Northeast Area 138 River Road Shattuck Office Center Andover, MA 01810 Tel: 978/688-8687 Fax: 978/688-8896 Oki Web Site: http://www.okisemi.com For Oki Literature: Call toll free 1-800-OKI-6388 (6 a.m. to 5 p.m. Pacific Time) Oki Stock No: 320151-001 Corporate Headquarters 785 N. Mary Avenue Sunnyvale, CA 94086-2909 Tel: 408/720-1900 Fax: 408/720-1918