OV05630-V58A

OV5630/OV5633 5 megapixel product brief available in a lead-free package low power, high-performance 5 megapixel CameraChip™ image sensor with unparalleled low-light sensitivity Incorporating OmniVision’s proprietary 1.75 micron OmniPixel3-HS™ architecture, the OV5630 delivers best-in-class low-light performance, enabling a new generation of high-performance camera phones that deliver top quality digital photography and video in a small form factor. The OV5633, a modified version of the OV5630, is an ideal solution for the digital still camera and digital video (DSC/DV) hybrid camera market. The OV5630 and OV5633 both use OmniPixel3-HS technology, enabling unparalleled low-light image capture with low-light sensitivity of 960mV/(Lux-sec). The 1/3.2-inch RGB raw sensors offer differing chief ray angles (CRA) to suit the specific lens requirements for mobile phone and DSC.DV hybrid applications. The sensors also support automatic exposure control, gain control, white balance, 50/60 Hz luminance detection and black level calibration. Both sensors can output data in full 5 megapixel resolution at 15 frames per second (fps) and record 720p high definition (HD) video at 60 fps or 1080p at 30 fps. For the data transfer of image data, both sensors are outfitted with a two-lane, high-speed MIPI interface. This enables mobile phone makers to use the OV5630’s parallel interface as input for a secondary camera while alternately providing output via the MIPI interface. The OV5630/OV5633 brings you the best available performance for ultra-compact applications and a user-friendly platform that allows complete control over image quality, formatting and output data transfer. applications mobile phones PC multimedia digital still camera toys/games OV5630/OV5633 ordering information OV05630-V58A OV05633-C48A (color, 58-pin CSP2) OV05630-G04A (color, chip probing, 200μm backgrinding, reconstructed wafer) (color, 48-pin CLCC) product features OmniPixel3-HS technology optical size of 1/3.2" automatic image control functions: – automatic exposure control (AEC) – automatic band filter (ABF) – automatic 50/60 Hz luminance detection – automatic black level calibration (ABLC) product specifications support for LED and flash strobe mode support for horizontal and vertical sub-sampling digital video port (DVP) parallel output interface MIPI interface (two lanes), MIPI hub/secondary camera interface embedded one-time programmable (OTP) memory on-chip phase lock loop (PLL) embedded 1.5V regulator for core power programmable I/O drive capability support for black sun cancellation High Dynamic Range (HDR) ready for sub-sampling resolution providing a dynamic range of ~80dB active array size: 2592 x 1944 power supply: – core: 1.5VDC± 5% – analog: 2.6 ~ 3.1V (2.8V typical) – I/O: 1.7 ~ 3.1V shutter: rolling shutter max image transfer rate: – – – – – QSXGA: 15 fps 1080p: 30 fps 720p: 60 fps VGA (640x480): 60 fps 1280x960: 60 fps temperature range: – operating: -30° to 70°C – stable image: 0° to 50°C dynamic range: ~ 80 dB pixel size: 1.75 μm x 1.75 μm package/die dimensions: – CLCC: 14.22 mm x 14.22 mm – CSP2: 6385 mm x 6285 mm – COB: 6400 mm x 6300 mm programmable controls for: frame rate, AEC/AGC, mirror and flip, cropping, windowing and panning image quality controls: lens correction, defective pixel canceling support for video or snapshot operations support for internal and external frame synchronization standard serial SCCB interface output format: – 10-bit RGB RAW output – I/O tri-state configurability lens size: 1/3.2" lens chief ray angle: 25° non-linear input clock frequency: 6~27 MHz functional block diagram OV5630 / OV5633 analog array and analog process digital (DVDD) AEC/AGC frame average A/D converter BLC (ADC stage) sensor timing control digital BLC DSP interface ISP DVP para port power control note 1 digital: DIO_VDD PLL windowing note 3 sensor control note 2 register set SCCB slave MIPI PHY note 1 power control (positive and negative pump, regulator) note 2 sensor control (group hold, mask corrupted frame, etc.) note 3 windowing (crop, mirror, vflip, etc.) 5630_PB_1 OmniVision reserves the right to make changes to their products or to discontinue any product or service without further notice. OmniVision and OmniPixel are registered trademarks of OmniVision Technologies, Inc. The OmniVision logo, CameraChip and OmniPixel3-HS are trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners. 4275 Burton Drive Santa Clara, CA 95054 tel: +1 408 567 3000 fax: +1 408 567 3001 www.ovt.com Version 1.11, August 2008