3S4YR-SGR0J

® Insert Magnetic/IC Card Reader 3S4YR-SGR Compact Insert Reader with Magnetic and IC Card Interface Ideally suited for applications using hybrid magnetic stripe and IC cards ■ Landing-style IC contact supports both ISO and CP8 chip contact locations ■ Red and green LEDs for operation status indication ■ Solenoid-controlled IC card release mechanism ■ Configurations available to read on card push or pull ■ TTL-compatible interface ■ Ordering Information Magnetic Tracks Supported (R, R/W) 1 2 3 Center JIS II IC Contact Interface Mag Read Direction Solenoid Cover Cable Color Part Number — — — — — ISO 7816 TTL — Yes No No Black 3S4YR-SGR0J R R R — — ISO 7816 TTL Push Yes No No Black 3S4YR-SGR1J R R R — — ISO 7816, CP8 TTL Push Yes No No Black 3S4YR-SGR1X R R R — — — TTL Push/pull No No No Black 3S4YR-SGR1N — R — — — ISO 7816 TTL Push Yes No No Black 3S4YR-SGR4J — R — — — — TTL Push/pull No No No Black 3S4YR-SGR4N R R — — — ISO 7816 TTL Push Yes No No Black 3S4YR-SGR6J R R — — — — TTL Push/pull No No No Black 3S4YR-SGR6N — R R — — ISO 7816 TTL Push Yes No No Black 3S4YR-SGR7J — R R — — — TTL Push/pull No No No Black 3S4YR-SGR7N Note: Consult the IC Card Basics section of this catalog for IC contact descriptions. 3S4YR-SGR 3S4YR-SGR ■ TYPICAL APPLICATIONS • Remote Terminals for Computers • Credit Card Readers • ID Card Checkers • Electronic Locks • Automatic Gate Machines • POS Terminals • ATMs • Gas Pump Control • Vending Machines • Pre-Paid Systems • Kiosks Specifications Part number 3S4YR-SGR (except 0J) Recommended card type Magnetic card IC card ISO 7816/1-2 Service life Mag head 300,000 passes (preliminary) IC contact 3S4YR-SGR0J ISO 7810 - 7813 500,000 passes (preliminary) Operating power supply 5 VDC ± 5% Card feed speed 100 to 800 mm/sec. Current consumption 2.5 A max. (during solenoid release), 100 mA typ. Mounting location Indoors — away from wind, rain, sunlight, and dust Ambient temperature 0° to 45°C (32° to 113°F) Ambient humidity Operation 30% to 85% RH without condensation and frost formation Vibration 10-150 Hz, single vibration width of 0.15 mm or on acceleration of 2 G (19.6 m/s2), whichever is smaller Shock 20 G (196 m/s2) in X, Y, and Z directions, respectively Dimensions 126L x 76W x 30H mm (4.96L x 2.99W x 1.18H in) Weight Approx. 100 g (3.5 oz) 126L x 76W x 25H mm (4.96L x 2.99W x 0.98H in) Engineering Data ■ I/O INFORMATION 5V Output signal levels VOL = 0.4 V at 5 mA VOH = 2.8 at 0.1 mA GND 2 3S4YR-SGR 3S4YR-SGR ■ I/O INFORMATION 3S4YR-SGR 7626-5002SC (3M:26 pin), MIL-C-83503A conformed. Pin # Signal Input/Output Description Pin # Signal Input/Output Description 1 RDT1 Output 2 RCL1 Output Read data, track 1 14 IVCC ◆ IC contact C1 Read clock, track 1 15 IVPP ◆ 3 RDT2 IC contact C6 Output Read data, track 2 16 IRST ◆ 4 IC contact C2 RCL2 Output Read clock, track 2 17 IDATA ◆ IC contact C7 5 RDT3 Output Read data, track 3 18 ICLK ◆ IC contact C3 6 RCL3 Output Read clock, track 3 19 IRFV2 ◆ IC contact C8 7 P1 Output Card detection 20 IRFV1 ◆ IC contact C4 8 P2 Output Card insertion completed 21 5VS — Power for solenoid 9 SLN Input Solenoid ON 22 5VS — Power for solenoid 10 LED 1 Input LED1 (Red) ON 23 5V — Power for logic 11 LED 2 Input LED 2 (Green) ON 24 0V — Ground 12 CLS Output Magnetic card loading 25 0V — Ground 13 IGND ◆ IC contact C5 26 0V — Ground ◆ = Direct IC Contact Dimensions Unit: mm (inch) ■ 3S4YR-SGR (Except 0J) Inserted card position Ejected card position 4 (0.16) 7.5 max. (0.30) 40 (1.57) 16.5 (0.65) 3 (0.12) Magnetic stripe (back) IC Card 68 (2.68) 54.3 (2.14) 60 (2.36) 2.7 (0.11) 76 (2.99) IC Contact (Front) Insert Magnetic head and chip contacts are located on the opposite side of the card. 4-ø3.5 Connector IC contact Mag head 57 (2.24) 50 (1.97) 126 (4.96) 30 (1.18) 6 (0.24) 1 (0.04) 20 (0.78) 5 4.2 10 (0.20) (0.17) (0.39) A 27.5 (1.08) 21 (0.83) 9 (0.35) 8 (0.31) 4.5 (0.18) 2 (0.08) 1 4-R 1 (0.04) 1.5 (0.06) A 39 (1.54) 58 (2.28) 3 R 2 Section A-A 3S4YR-SGR 3S4YR-SGR ■ 3S4YR-SGR0J Inserted card position Ejected card position 4.5 max. (0.18) 4 (0.16) 40 (1.57) 16.5 (0.65) 3 (0.12) IC Card 68 (2.68) 54.3 (2.14) 60 (2.36) 2.7 (0.11) 76 (2.99) IC contacts (front) Insert 4-ø3.5 IC contact 57 (2.24) 50 (1.97) 126 (4.96) 27.5 (1.08) 1 (0.04) 25 (0.98) 20 (0.78) 5 (0.20) 21 (0.83) NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. R OMRON ELECTRONICS, INC. OMRON CANADA, INC. 1-800-55-OMRON 416-286-6465 One East Commerce Drive Schaumburg, IL 60173 Cat. No. GC CR3 7/00 885 Milner Avenue Scarborough, Ontario M1B 5V8 Specifications subject to change without notice. 4 Printed in U.S.A.