A165E-M-03U

Emergency Stop Switch A165E Mounting Aperture of 16 mm • Modular construction, easy installation • Direct opening mechanism with minimum contact separation of 3 mm in accordance with EN60947-51, Æ . (only for NC contacts) • Conforms to EN418, EN60947-5-1. • Includes a safety lock to prevent misuse. • Features separate construction that allows the Switch to be separated for easier wiring and onepiece-like construction that allows easier handling. • High reliability, IP65 • Short mounting depth, less than 28.5 mm below panel • Quick and easy assembly, snap-in Switch. • A165E is identifiable, clearly visible and will stop a dangerous process, without creating additional hazards. Model Number Structure Model Number Legend A165E-##-#-# 12 3 4 4. Contacts 01: SPST (NC) 02: DPST (NC) 03U: TPST (NC) One-body, non-lighted models only 1. Lighted/Non-lighted None: Non-lighted L: Lighted 2. Head Size S: 30 mm dia. M: 40 mm dia. 3. Illumination (Operation Voltage/Rated Voltage) None: Non-lighted 24D: LED (24 VDC) D-208 Safety Sensors / Components Ordering Information List of Models Illumination Rated voltage Pushbutton color Pushbutton size Terminal Contact SPST-NC DPST-NC SPST-NC DPST-NC TPST-NC SPST-NC DPST-NC SPST-NC DPST-NC TPST-NC Standard load (125 VAC at 5 A, 250 VAC at 3 A, 30 VDC at 3 A) A165E-LS-24D-01 A165E-LS-24D-02 A165E-S-01 A165E-S-02 A165E-S-03U A165E-LM-24D-01 A165E-LM-24D-02 A165E-M-01 A165E-M-02 A165E-M-03U LED 24 VDC 30 dia. None --Red Solder terminal LED 24 VDC 40 dia. None --- Note: The above models have a surface indication of “RESET.” Models with “STOP” indication are also available. For further information, contact your OMRON representative. Accessories (Order Separately) Item Yellow Plate Appearance Type Yellow, 45 dia. Rectangular Square Round Model A16Z-5070 A16ZJ-3003 A16ZA-3003 A16ZT-3003 Precautions Use this as an emergency stop nameplate. Used for covering the panel cutouts for future panel expansion. A165E Panel Plug Tightening Tool --- A16Z-3004 Useful for repetitive mounting. Be careful not to tighten excessively. Extractor --- A16Z-5080 Convenient for extracting the Switch and Lamp. Specifications Approved Standards Recognized Organization UL, cUL (see note) AZCO Note: UL: UL508, cUL: CSA C22 No. 14 Standards UL508 EN60947-5-1 E41515 C9805501 File No. Approved Standard Ratings UL, cUL Rated voltage 125 VAC 250 VAC 30 VDC Rated current A165E-U series A165E series 5 A (General use) 1 A (General use) 3 A (General use) 0.5 A (General use) 3 A (Resistive) 1 A (Resistive) A165E D-209 Ratings Switch Ratings Rated voltage Resistive load A165E#-U series A165E series 5A 1A 3A 0.5 A 3A 1A 1 mA at 5 VDC 125 VAC 250 VAC 30 VDC Minimum applicable 150 mA at 5 VDC load Characteristics Item Allowable operating frequency Insulation resistance Dielectric strength Vibration resistance Shock resistance Malfunction Destruction Malfunction Mechanical Electrical Mechanical Electrical Emergency Stop Switch 20 operations/minute max. 10 operations/minute max. 100 MW min. (at 500 VDC) 1,000 VAC, 50/60 Hz for 1 min between terminals of same polarity 2,000 VAC, 50/60 Hz for 1 min between terminals of different polarity and also between each terminal and ground 1,000 VAC, 50/60 Hz for 1 min between lamp terminals (see note) 10 to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms) 500 m/s2 300 m/s2 max. (malfunction within 1 ms), 150 m/s2 max. In case of A165E#U series 100,000 operations min. 100,000 operations min. Operating:-10°C to 55°C (with no icing or condensation) Storage:-25°C to 65°C (with no icing or condensation) Operating:35% to 85% Class II 175 3 Approx. 16 g (in case of DPDT Switches) Durability Ambient temperature Ambient humidity Electric shock protection class PTI (tracking characteristic) Degree of contamination Weight Note: LED not mounted. Test them with the LED removed. Operating Characteristics Features Operating force (OF) max. Releasing force (RF) min. Pretravel (PT) Characteristics 14.7 N 0.1 N·m 3.5±0.5 mm (3±0.5 mm In case of A165E#U series) D-210 Safety Sensors / Components Nomenclature \ Illumination Colors ∑ LED Illumination Red ∑ Non-lighted Red Protective Structure and Terminal Type ∑ Protective Structure Oil-resistant IP65 ∑ Terminal Type Solder terminals (tab terminals #110) Illumination Method ∑ LED Lamp ∑ LED lamp Switch Specifications ∑ Standard Loads 5 A at 125 VAC 3 A at 250 VAC 3 A at 30 VDC Note: A165E Emergency Stop Switch must be ordered as a set. No LED is installed for the non-lighted model. Push-lock, Turn-reset System Prevents Misuse Contact open Safety Lock Prevents Misuse Even if an object or person touches the pushbutton by mistake, the contact will not be released unless the pushbutton reaches the lock position. Contact closed Lock position A165E D-211 A165E Dimensions Note: All units are in millimeters unless otherwise indicated. A165E Non-lighted models 30 mm diameter 30 dia. Mounting ring 3+0.1 dia. 0 7.8+0.3 dia. 0 Packing (T0.5) Lock ring Lock Note: 1. When applying a coating such as paint to the panel, dimensions after the coating must satisfy the specified dimensions. 2. Recommended panel thickness: 0.5 to 3.2 mm. Panel cutout dimensions 16+0.2 dia. 0 22.1±0.8 A165E Lighted models 30 mm diameter 30 dia. Mounting ring Lock ring 7.8+0.3 dia. 0 Packing (T0.5) Lock 3+0.1 dia. 0 Note: 1. When applying a coating such as paint to the panel, dimensions after the coating must satisfy the specified dimensions. 2. Recommended panel thickness: 0.5 to 3.2 mm. Panel cutout dimensions 16+0.2 dia. 0 22.1±0.8 A165E#U One-body models 30 mm diameter 22.7 30 dia. Mounting ring Note: 1. When applying a coating such as paint to the panel, dimensions after the coating must satisfy the specified dimensions. 2. Recommended panel thickness: 0.5 to 3.2 mm. 16+0.2 dia. 0 3+0.1 dia. 0 7.8+0.3 dia. 0 Packing (T0.5) Lock ring Panel cutout dimensions Mounting ring D-212 Safety Sensors / Components A165E Non-lighted models 40 mm diameter 40 dia. Mounting ring M16¥1 Switch 0.5 Packing (T0.5) Lock ring Lock 7.8+0.3 dia. 0 16+0.2 dia. 0 12.1 2.8 3+0.1 dia. 0 2.6 1.4 12.3 15.8 18 Note: 1. When applying a coating such as paint to the panel, dimensions after the coating must satisfy the specified dimensions. 2. Recommended panel thickness: 0.5 to 3.2 mm. Panel cutout dimensions 10.8±0.5 20±0.8 21.1±0.8 28.5±0.8 A165E Lighted models 40 mm diameter 40 dia. Mounting ring M16¥1 Switch 0.5 Packing (T0.5) Lock ring Lock 12.3 15.8 16+0.2 dia. 0 2.8 3+0.1 dia. 0 7.8+0.3 dia. 0 Note: 1. When applying a coating such as paint to the panel, dimensions after the coating must satisfy the specified dimensions. 2. Recommended panel thickness: 0.5 to 3.2 mm. Panel cutout dimensions A165E#U Non-lighted, one-body models 40 mm diameter 40 dia. Operation part 21.5±0.5 M16¥1 1 SR82 Lock 16+0.2 dia. 0 3+0.1 dia. 0 Packing (T0.5) Lock ring Note: 1. When applying a coating such as paint to the panel, dimensions after the coating must satisfy the specified dimensions. 2. Recommended panel thickness: 0.5 to 3.2 mm. Panel cutout dimensions 7.8+0.3 dia. 0 Mounting ring A165E 6.05 18 D-213 A165E Accessories Yellow Plate (Vinyl Chloride) A16Z-5070 Panel Plugs Select an appropriate Panel Plug according to the panel design and mount from the front side of the panel. Panel cutout dimensions are the same as those for the Switch. Rectangular Square Round 15.6 dia. Screw Fitting t=1 45 dia. A16Z-3004 Lock Ring Rough surface Rough surface 15.8 ±0.1 dia. 18 dia. 0 15 dia. -0.1 Terminal Arrangement SPST Switches DPST Switches TPST Switches NC2 NC1 12 ¥ 12 Stopper NC3 Note: The L+ and L- terminals are not available with the non-lighted models. D-214 Safety Sensors / Components