A6H-4102-PM

Half-pitch DIP Switch Ultra-low Profile, Half-pitch, Surface-mounting DIP Switch ■ Very low profile of 1.55 mm. ■ Mounting space reduced by 63% A6H (compared with conventional models). ■ Washable, seal tape models available. ■ Embossed taping models available. (SQ reel (small reel) also available) RoHS Compliant (Refer to page 8 for details.) Ordering Information Type Standard models Stick models Embossed taping Small reel (units of 500) (See note.) Stick models Models with seal tape Embossed taping Standard reel (units of 4,000) (See note.) Small reel (units of 500) (See note.) No. of poles Quantity per stick 75 54 40 33 A6H-4101 A6H-6101 A6H-8101 A6H-0101 A6H-4101-PM A6H-6101-PM A6H-8101-PM A6H-0101-PM A6H-4102 A6H-6102 A6H-8102 A6H-0102 A6H-4102-P A6H-6102-P A6H-8102-P A6H-0102-P A6H-4102-PM A6H-6102-PM A6H-8102-PM A6H-0102-PM 4 6 8 10 Note: Embossed taping models are packaged in units of 500 or 4,000. Orders must be made in multiples of either 500 or 4,000. Switches are not sold individually. Specifications ■ Ratings/Characteristics 25 mA at 24 VDC 10 µA (minimum current) at 3.5 VDC Operating: Storage: Operating: –20 to 70°C (with no icing or condensation) –40 to 80°C (with no icing or condensation) 35% to 90% Switching capacity Ambient temperature Ambient humidity Insulation resistance Contact resistance Dielectric strength Vibration resistance Shock resistance Life expectancy Operating force Enclosure rating Weight 100 MΩ min. (at 250 VDC) 200 mΩ max. (initial value) 300 VAC for 1 min between terminals of the same polarity, and between terminals of different polarity Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Malfunction: 300 m/s2 min. Mechanical: 1,000 operations min. Electrical: 1,000 operations min. 0.29 to 4.9 N {30 to 500 gf} Equivalent to IP40 0.09 g (4 poles) 0.12 g (6 poles) 0.15 g (8 poles) 0.18 g (10 poles) 9 A6H A6H Dimensions Note: 1. All units are in millimeters unless otherwise indicated. 2. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Standard A6H-@101 Dimensions of PCB pad (Top View) Standard With seal tape Seal tape (t=0.05) P = No. of poles With Seal Tape A6H-@102 A6H-@102-P No. of poles 4 6 8 10 A6H-4101 A6H-6101 A6H-8101 A6H-0101 Model A6H-4102 A6H-6102 A6H-8102 A6H-0102 Dimension A 6.31 8.85 11.39 13.93 Installation ■ Internal Connections (Top View) 1 2 9 10 Precautions Be sure to refer to General Precautions on pages 5 to 7 for details on proper use. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. A117-E1-02 10