A8A-207-1

Rocker Switch A8A Safety-considered Power Rocker Switch • Low heat radiation with a Unique leaf spring mechanism. • Positive-opening mechanism incorporated. • AC operated Neon lamp illumination models available. • Contact gap of 3 mm minimum. • Variety of color models available • UL and CSA standards approved. Conforms to EN standard. RoHS Compliant Caution Refer to Precautions ■List of Models ● Non-illuminated Models 2 1 4 3 Contact Form Quantity per box Color of cases White Black White A8A-201 A8A-201-1 - Red A8A-202 A8A-202-1 A8A-202-2 Green A8A-203 A8A-203-1 A8A-203-2 Blue A8A-204 A8A-204-1 - Yellow A8A-205 A8A-205-1 - Black A8A-207 A8A-207-1 A8A-207-2 Color of caps Gray 50 Note: Marking of Non-illuminated Models The cap of the above mentioned models is without marking. Models with marking is with suffix "-@F" such as A8A-201-F and A8A-201-1F. Models with marking is with suffix "-@D" such as A8A-201-D and A8A-201-1D. Consult your Omron sales representative for details. ● Illuminated Models 2 1 4 3 Contact Form Rated voltage 100 VAC Quantity per box 200 to 220 VAC Color of cases White Black Gray White Black Gray Red A8A-212 A8A-212-1 A8A-212-2 A8A-222 A8A-222-1 A8A-222-2 A8A-213 A8A-213-1 A8A-213-2 A8A-223 A8A-223-1 A8A-223-2 A8A-216 A8A-216-1 A8A-216-2 A8A-226 A8A-226-1 A8A-226-2 Color of caps Green Orange 50 Note: Marking of illuminated Models The cap of the above mentioned models is without marking. Models with marking is with suffix "-@A" such as A8A-212-A and A8A-212-1A. Models with marking is with suffix "-@G" such as A8A-212-G and A8A-212-1G. Consult your Omron sales representative for details. 1 A8A A8A ■Ratings ■Neon lamps Non-inductive Rated load Resistive load Lamp load 125 VAC 16A 250 VAC 16A Inductive Inductive load Inductive motor load 10A 16A 16A 10A 8A 16A Note: 1. The above value shows steady current. 2. The inductive load has a power factor of 0.4 min (AC) and a time constant of 7 ms min (DC). 3. Lamp load has an inrush current of 10 times the steady current. 4. Motor load has an inrush current of 6 times the steady current. 5. The above ratings were tested under the following conditions: (1) Ambient temperature: 20±2 °C (2) Ambient humidity: 65±5 %RH (3) Switching frequency: 20 times/min. Models Rated voltage Rated current A8A-21@-@ 100 VAC 1.5 mA A8A-22@-@ 200 to 220 VAC 1.5 mA Note: 1. Life expectancy: 15,000 Hr min. 2. Lamp is not exchangeable. ■Approved Safety Standards UL (UL508) 16A 125 VAC, 16A 250 VAC CSA (CSA C22.2 No.55) 16A 125 VAC, 16A 250 VAC VDE (EN61058-1) 16A 250 VAC ■Characteristics Permissible operating speed Permissible operating frequency 1 to 500 mm/s Mechanical 30 operations / min max. Electrical 20 operations / min max. Insulation resistance 100 MΩ min. (at 500 VDC with insulation tester) Contact resistance (initial value) 20 mΩ max. (6 to 8 VDC, 1 A, voltage drop method) Between terminals of the same polarity 2.000 VAG, 50/60 Hz, for 1 min Between terminals of the different polarity 2.000 VAG, 50/60 Hz, for 1 min (See Note *) Between charged metal parts and the ground terminal 4.000 VAG, 50/60 Hz, for 1 min Vibration resistance Malfunction 10 to 55 Hz, 1.5-mm double amplitude Shock resistance Malfunction 300 m/s2 max. Mechanical 40,000 operations min. Electrical 20,000 operations min. Dielectric strength Durability Weight Non-illuminated: Approx 15g. Illuminated: Approx 16g. Inrush current 100A max. (100 ms max.) Ambient operating temperature - 25 to +50 °C (with no icing or condensation) Ambient operating humidity 45 to 85 %RH Degree of protection IEC IP40 Electric shock protection class Class II PTI (proof tracking index) 175 Pollution degree 2 Note: For the condition in individual standard, contact your OMRON sales representative. * Condition in the Neon lamp illuminated models are excluded. 2 A8A A8A ■Operating Circuit Neon lamp illuminated Models 2 1 2 1 4 3 4 Load Load Correct wiring Fig. D Illuminated in accordance with switch-on Fig. C Illuminated in accordance with power source 3 Fig. B 2 1 4 3 Load Non-illuminated Models Fig. A Fig. E 250 VAC Load Load Incorrect wiring 2 1 4 3 2 1 4 3 Load Load 125 VAC 1. Do not apply any different voltage between the couple of terminals 1- 2, and 3- 4. 2. Safety standards approved for the figures A, C, and D. Note ■Dimensions (Unit: mm) A8A 32±0.5 25.2 OFF mark 1.6 dia. sink 25±0.5 21.2 19.2 9.2 1.7±0.2 32±0.5 25.2 21.8±0.2 8±1 FP 20 ■Operating Characteristics Operating force (OF) max. 30±1 19.6 N {2,000 gf} Free Position (FP) 8±1 mm Operating Position (OF) 5±1 mm 29.6±0.3 10.8 #250 Quick connect terminal (t=0.8) Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. ■Panel Cutout 30+0.4 0 Play R 22+0.4 0 Note: Recommended panel thickness: 1.0 to 3.0 mm. Edge When processing the panel, be sure that the Play R is on the switch operation side. Be sure that the Edge is on the reverse side of panel when processing. 3 A8A A8A ■Optional Accessories (Sold separately) Rubber cap for high dustproof. A8A RUBBER CAP 0.5 10.5 0.5 2.2 37.2 29.2 21.8 30 Cendition the cap on Switch ■Precautions Be sure to read the Safety precautions common to all Rocker Switches for correct use. • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. A201-E1-04 1014(0207)(O)