A8L

Miniature Rocker Switch A8L Rocker Switch for High Current Switching • Withstands inrush currents up to 100 A due to a unique switching mechanism. • Soft touch with firm switching action. • Easy to mount by snap fitting. • Contact gap of 3 mm minimum. • UL and cUL standards approved. Conforms to EN standards. Ordering Information Color of caps and Marking cases on caps (flanges) Black Without markings SPST 2 1 DPST Rightangled PCB terminals A8L-1113N1 A8L-1113N2 A8L-1113N3 A8L-1113N6 Leftangled PCB terminals A8L-1114N1 A8L-1114N2 A8L-1114N3 A8L-1114N6 Quickconnect terminals #187 A8L-1115N1 A8L-1115N2 A8L-1115N3 A8L-1115N6 2 4 1 3 Solder terminals A8L-1111N1 A8L-1111N2 A8L-1111N3 A8L-1111N6 PCB terminals A8L-1112N1 A8L-1112N2 A8L-1112N3 A8L-1112N6 Solder terminals A8L-2111N1 A8L-2111N2 A8L-2111N3 A8L-2111N6 PCB terminals A8L-2112N1 A8L-2112N2 A8L-2112N3 A8L-2112N6 Rightangled PCB terminals A8L-2113N1 A8L-2113N2 A8L-2113N3 A8L-2113N6 Leftangled PCB terminals A8L-2114N1 A8L-2114N2 A8L-2114N3 A8L-2114N6 Quickconnect terminals #187 A8L-2115N1 A8L-2115N2 A8L-2115N3 A8L-2115N6 Specifications ■ Ratings Rated load 125 VAC 250 VAC Note: 1. 2. 3. 4. Resistive load 10 A 10 A Lamp load 10 A 10 A Inductive load 8A 8A Inductive motor load 8A 8A The non-inductive lamp load has an impulse current ten times the normal current. The inductive load has a power factor of 0.7 minimum (AC). The motor load has an impulse current 6 times the normal current. The ratings values apply under the following test conditions: Ambient temperature: 20±2°C, Ambient humidity: 65±5%, Operating frequency: 7 times/min ■ Approved Safety Standards UL, cUL (File No. E41515) EN61058-1 (TÜV certificate no. J50021820) 10 A, 125 VAC; 10 A, 250 VAC 10 (8) A, 250 V~ Note: Consult your OMRON representative for details of performance characteristics with respect to individual standards. OFF ON Miniature Rocker Switch A8L 1 ■ Characteristics Operating frequency Insulation resistance Dielectric strength Vibration resistance Shock resistance Life expectancy Ambient temperature Ambient humidity Inrush current Mechanical: 20 operations/min max. Electrical: 7 operations/min max. 100 MΩ min. (500 VDC) 2,000 VAC, 50/60 Hz, for 1 min between terminals of the same polarity and different polarity 4,000 VAC, 50/60 Hz, for 1 min between charged metal parts and the ground terminal Malfunction: 10 to 55 Hz, 1.5-mm double amplitude (malfunction time of 1 ms max.) Malfunction: 300 m/s2 (malfunction time of 1 ms max.) Destruction: 500 m/s2 Mechanical: 50,000 operations min. Electrical: 10,000 operations min. Storage: –25 to 60°C (with no icing or condensation) Operating: –20 to 55°C (with no icing or condensation) Storage: 45% to 85% Operating: 45% to 85% 100 A max. (8.3 ms max.) Dimensions Note: Unless otherwise specified, all units are in millimeters. ■ Panel Cutouts For Straight Terminals (A8L-@@-@1@@, A8L-@@-@2@@), A8L-@@-@5@@) X For Angled PCB Terminals (A8L-@@-@3@@, A8L-@@-@4@@) X 0.1 0 Y 12.9 17.5±0.3 Panel thickness (mm) 0.75 to 1.25 1.26 to 2.5 X (mm) 19.2 0 −0.1 Y (mm) 12.9 +0.1 0 12.9 +0.1 0 15±0.3 Panel thickness (mm) 0.75 to 1.25 1.26 to 2.5 X (mm) 19.2 −0 0.1 +0.1 19.4 −0.3 +0.1 19.4 −0.3 Note: Recommended panel material: SPCC Play R Edge Be sure that play R is the operation side. ■ Dimensions and Operating Characteristics Solder Terminals A8L-11-11N1 A8L-11-11N2 A8L-11-11N3 A8L-11-11N6 A8L-21-11N1 A8L-21-11N2 A8L-21-11N3 A8L-21-11N6 5.6 2 16.5 13 3.6 8.5 2.3 10 19 21 15 10.8 No. of poles OF (operating force) 2 dia. 1 220 ± 120 gf 2 400 ± 250 gf 1.4 dia. 4.8 0.8 8.75 12.5 2 Miniature Rocker Switch A8L PCB Terminals A8L-11-12N1 A8L-11-12N2 A8L-11-12N3 A8L-11-12N6 A8L-21-12N1 A8L-21-12N2 A8L-21-12N3 A8L-21-12N6 5.6 2 16.5 13 21 15 10.8 PCB Cutout Dimensions (Bottom View) Four, 1.8±0.1-dia. holes 8.75±0.1 No. of poles OF (operating force) 10±0.1 1 220 ± 120 gf 2 400 ± 250 gf 4 1.3 10 19 0.8 8.75 12.5 Right-angled PCB Terminals A8L-11-13N1 A8L-11-13N2 A8L-11-13N3 A8L-11-13N6 A8L-21-13N1 A8L-21-13N2 A8L-21-13N3 A8L-21-13N6 21 15 10.8 5.6 2 PCB Cutout Dimensions (Bottom View) Four, 1.8±0.1-dia. holes 8±0.1 10±0.1 16.5 13 2 0.8 3.3 10 19 12.5 8 No. of poles OF (operating force) 1 220 ± 120 gf 2 400 ± 250 gf 4 Left-angled PCB Terminals A8L-11-14N1 A8L-11-14N2 A8L-11-14N3 A8L-11-14N6 A8L-21-14N1 A8L-21-14N2 A8L-21-14N3 A8L-21-14N6 21 15 10.8 5.6 2 PCB Cutout Dimensions (Bottom View) Four, 1.8±0.1-dia. holes 8±0.1 10±0.1 16.5 13 2 No. of poles 8 3.3 10 19 0.8 12.5 1 220 ± 120 gf 2 400 ± 250 gf OF (operating force) 4 Quick-connect Terminals #187 A8L-11-15N1 A8L-11-15N2 A8L-11-15N3 A8L-11-15N6 A8L-21-15N1 A8L-21-15N2 A8L-21-15N3 A8L-21-15N6 21 15 10.8 5.6 2 16.5 13 1.4±0.1 dia. hole 8.5 3±0.1 10 19 4.8 0.8 8.75 12.5 No. of poles OF (operating force) 1 220 ± 120 gf 2 400 ± 250 gf Miniature Rocker Switch A8L 3 Precautions ■ Correct Use Mounting Turn OFF the power supply before mounting, removing or wiring the Switch, or before performing maintenance inspections. Failure to do so may result in electric shock. Do not use panels other than ones with the designated thickness and dimensions. Remove all burrs from the cutout before installing the Switch. Otherwise, the Switch may malfunction. Do not impose excessive force on the Switch at the time of panelmounting. There are two small divots in the flange part of the case marking ON and OFF as shown in the following diagram. Use these marks as guides when mounting. ■ Cautions Do not wire the Switch or touch any terminal of the Switch While power is being supplied. Doing so may result in electric shock. To increase the reliability of operation, test the Switch before actual operation. Be sure that there is an enough insulation distance between any Switch terminal and metal part. Handling Do not drop the Switch. Otherwise, the Switch may malfunction. Do not impose excessive force on the Switch. Otherwise, the Switch may deform. The recommended panel material is SPCC. The Switch may fall off if the material is soft and cannot securely hold the Switch. When using a soft material, test the Switch with it before using the Switch in actual operation. OFF ON Wiring When soldering terminals manually, perform soldering within 3 s using a 60-W soldering iron (temperature at the tip of the soldering iron: 420°C max.). Do not apply excessive force to the terminals during soldering. When soldering using a soldering tub, perform soldering within 5 s in a soldering fluid at 270°C, or within 3 s in a soldering fluid at 350°C. Be sure that the wires are thick enough for the load (current) to be applied. Only A8L-@@-@5@@ models are equipped with (6.3×0.8) mm flatquick connections for use with #187 fasten receptacles. The terminals of A8L-@@-@1@@ are not in compliance with IEC standards for flat-quick connections. Suitable for use as solder connection only. Using Microloads The performance of the Switch may be affected if the Switch is used for switching micro loads. Test the Switch under the actual operating conditions. Operating Environment Do not use the Switch in places with sulfide gas, corrosive gas, sea breeze, oil spray, or direct sunlight. Otherwise, the Switch may malfunction. Do not use the Switch in places that are visibly dusty. Otherwise, the contacts may fail to operate correctly. 4 Miniature Rocker Switch A8L Omron Electronic Components, LLC Terms and Conditions of Sales I. GENERAL 1. Definitions: The words used herein are defined as follows. (a) Terms: These terms and conditions (b) Seller: Omron Electronic Components LLC and its subsidiaries (c) Buyer: The buyer of Products, including any end user in section III through VI (d) Products: Products and/or services of Seller (e) Including: Including without limitation 2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 3. Distributor: Any distributor shall inform its customer of the contents after and including section III of these Terms. II. SALES 1. Prices; Payment: All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at the time the purchase order is accepted by Seller. Payments for Products received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. 2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past due amounts owing to Seller. 3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 4. Orders: Seller will accept no order less than 200 U.S. dollars net billing. 5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer shall make remittance to Seller at the then current exchange rate most favorable to Seller; provided that if remittance is not made when due, Buyer will convert the amount to U.S. dollars at the then current exchange rate most favorable to Seller available during the period between the due date and the date remittance is actually made. 6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining any government approvals regarding the importation or sale of the Products. 7. Taxes: All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller: (a) All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Products shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Products until the full purchase price is paid by Buyer; (b) Delivery and shipping dates are estimates only; and (c) Seller will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products occurring before delivery to the carrier or any claim related to pricing or other charges must be presented in detail in writing to Seller within 30 days of receipt of shipment. III. PRECAUTIONS 1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E) SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT. Buyer acknowledges that it alone has determined that the Products will meet their requirements of the intended use in all cases. Buyer must know and observe all prohibitions of use applicable to the Product/s. 2. Use with Attention: The followings are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible use of any Product, nor to imply that any use listed may be suitable for any Product: (a) Outdoor use, use involving potential chemical contamination or electrical interference. (b) Use in consumer Products or any use in significant quantities. (c) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (d) Systems, machines, and equipment that could present a risk to life or property. 3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY SELLER. 5. Programmable Products: Seller shall not be responsible for the Buyer's programming of a programmable Product. IV. WARRANTY AND LIMITATION 1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. 2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Product; provided that there shall be no liability for Seller or its affiliates unless Seller's analysis confirms that the Products were correctly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Seller before shipment. 3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF THE PRODUCT ON WHICH LIABILITY IS ASSERTED. 4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. V. INFORMATION; ETC. 1. Intellectual Property: The intellectual property embodied in the Products is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 3. Performance Data: Performance data is provided as a guide in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. 4. Change In Specifications: Product specifications and descriptions may be changed at any time based on improvements or other reasons. It is Seller’s practice to change part numbers when published ratings or features are changed, or when significant engineering changes are made. However, some specifications of the Product may be changed without any notice. 5. Errors And Omissions: The information on Seller’s website or in other documentation has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses regarding (a) export of the Products or information provided by Seller; (b) sale of Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information. VI. MISCELLANEOUS 1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. 2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent. 3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any dispute hereunder. 4. Amendment: These Terms constitute the entire agreement between Buyer and Seller relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. 5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. Miniature Rocker Switch A8L 5 Certain Precautions on Specifications and Use 1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Use in consumer products or any use in significant quantities. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof. 3. Performance Data. Performance data given in this publication is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Seller representative at any time to confirm actual specifications of purchased Product. 5. Errors and Omissions. The information in this publication has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. 6. RoHS Compliance. Where indicated, our products currently comply, to the best of our knowledge as of the date of this publication, with the requirements of the European Union's Directive on the Restriction of certain Hazardous Substances ("RoHS"), although the requirements of RoHS do not take effect until July 2006. These requirements may be subject to change. Please consult our website for current information. Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 OMRON ON-LINE Global - http://www.omron.com USA - http://www.components.omron.com 847-882-2288 Cat. No. A114-E-04a 11/09 Specifications subject to change without notice Printed in USA 6 Miniature Rocker Switch A8L