B3SE-1002P

B3SE Ultra-thin Sealed Surface-mounting Tactile Switch PCB surface-mounting 6-mm square type that achieves high durability with an ultra-thin, sealed structure. • A height of 2 mm contributes to the development of thinner and smaller devices. • Sealed construction conforming to IP67 (IEC 60529) provides high contact reliability in dusty environments. (* Excluding the terminal section.) • Crisp click feeling and high durability of 1million operations. • Surface-mounting pin type is suitable for high-density mounting. • A small package containing 100 embossed taping reels is available, in addition to the standard package containing 2000 reels. RoHS Compliant List of Model 6 × 6 mm Models Embossed tape Type Contact material B3SE Silver plated Plunger Height Operating force (OF) Plunger color 2.0 mm 1.96 N {200 gf} Blue Minimum packing unit Model B3SE-1002P 2,000 B3SE-1002P-R100 100 Note:Orders must be made in multiples of the minimum order. Switches are not sold individually. Ratings/Characteristics Rating (resistive load) Minimum applicable load (reference value) 1 to 50 mA at 3 to 12 VDC 10 μA at 1 VDC (resistive load) Ambient operating tem- -25°C to +70°C at 60%RH max. (with no icing or perature condensation) Ambient operating humidity 35% to 85% (at +5 to +35°C) Contact form SPST-NO Contact resistance (initial value) 100 mΩ max. Insulation resistance 100 MΩ min. (at 250 VDC with insulation tester) Dielectric strength 250 VAC, 50/60 Hz for 1 min Bounce time 5 ms max. Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude Shock resistance Destruction: 980 m/s2 {approx. 100 G} max. Durability 1,000,000 operations min. Degree of protection IEC IP67 Washing Not possible Operating Characteristics Item Operation type B3SE-1002P Operating force (OF) 1.96 ± 0.49 N {200 ± 50 gf} Releasing force (RF) 0.35 N min. {35 gf} Pretravel (PT) 0.3 ± 0.2 mm Model Structure Cover Contact dome Plunger Fixed Contact 1 B3SE Ultra-thin Sealed Surface-mounting Tactile Switch Dimensions (Unit: mm) B3SE-1002P B3SE-1002P-R100 6.2 Terminal Arrangement/ Internal Connections (Top View) PCB Pad (Top View) 4±0.2 7 3 2.5 dia. 4 3 2 1 5 3 7 8.5 2 0.8 1.5 6.8 0.7 Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. No terminal numbers are indicated on the Switches. Precautions Be sure to read the precautions common to all Tactile Switches on pages for correct use. Please check each region's Terms & Conditions by region website. OMRON Corporation Electronic and Mechanical Components Company Regional Contact Americas https://www.components.omron.com/ Asia-Pacific https://ecb.omron.com.sg/ Korea https://www.omron-ecb.co.kr/ Europe http://components.omron.eu/ China https://www.ecb.omron.com.cn/ Japan https://www.omron.co.jp/ecb/ © OMRON Corporation 2017-2018 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. 2 Cat. No. A262-E1-02 0918(0817)(O)